linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lorenzo.pieralisi@arm.com (Lorenzo Pieralisi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 15/15] irqchip: mbigen: Add ACPI support
Date: Fri, 13 Jan 2017 10:21:04 +0000	[thread overview]
Message-ID: <20170113102104.GB20837@red-moon> (raw)
In-Reply-To: <1484147199-4267-16-git-send-email-hanjun.guo@linaro.org>

On Wed, Jan 11, 2017 at 11:06:39PM +0800, Hanjun Guo wrote:
> With the preparation of platform msi support and interrupt producer
> in DSDT, we can add mbigen ACPI support now.
> 
> We are using _PRS methd to indicate number of irq pins instead
> of num_pins in DT to avoid _DSD usage in this case.
> 
> For mbi-gen,
>     Device(MBI0) {
>           Name(_HID, "HISI0152")
>           Name(_UID, Zero)
>           Name(_CRS, ResourceTemplate() {
>                   Memory32Fixed(ReadWrite, 0xa0080000, 0x10000)
>           })
> 
>           Name (_PRS, ResourceTemplate() {
> 		  Interrupt(ResourceProducer,...) {12,14,....}

I still do not understand why you are using _PRS for this, I think
the MBIgen configuration is static and if it is so the Interrupt
resource should be part of the _CRS unless there is something I am
missing here.

Lorenzo

>           })
>     }
> 
> For devices,
> 
>    Device(COM0) {
>           Name(_HID, "ACPIIDxx")
>           Name(_UID, Zero)
>           Name(_CRS, ResourceTemplate() {
>                  Memory32Fixed(ReadWrite, 0xb0030000, 0x10000)
> 		 Interrupt(ResourceConsumer,..., "\_SB.MBI0") {12}
>           })
>     }
> 
> With the helpe of platform msi and interrupt producer, then devices
> will get the virq from mbi-gen's irqdomain.
> 
> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
> Reviewed-by: Ma Jun <majun258@huawei.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> ---
>  drivers/irqchip/irq-mbigen.c | 70 ++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 67 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
> index 4e11da5..17d35fa 100644
> --- a/drivers/irqchip/irq-mbigen.c
> +++ b/drivers/irqchip/irq-mbigen.c
> @@ -16,6 +16,7 @@
>   * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>   */
>  
> +#include <linux/acpi.h>
>  #include <linux/interrupt.h>
>  #include <linux/irqchip.h>
>  #include <linux/module.h>
> @@ -180,7 +181,7 @@ static int mbigen_domain_translate(struct irq_domain *d,
>  				    unsigned long *hwirq,
>  				    unsigned int *type)
>  {
> -	if (is_of_node(fwspec->fwnode)) {
> +	if (is_of_node(fwspec->fwnode) || is_acpi_device_node(fwspec->fwnode)) {
>  		if (fwspec->param_count != 2)
>  			return -EINVAL;
>  
> @@ -271,6 +272,54 @@ static int mbigen_of_create_domain(struct platform_device *pdev,
>  	return 0;
>  }
>  
> +#ifdef CONFIG_ACPI
> +static acpi_status mbigen_acpi_process_resource(struct acpi_resource *ares,
> +					     void *context)
> +{
> +	struct acpi_resource_extended_irq *ext_irq;
> +	u32 *num_irqs = context;
> +
> +	switch (ares->type) {
> +	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
> +		ext_irq = &ares->data.extended_irq;
> +		*num_irqs += ext_irq->interrupt_count;
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return AE_OK;
> +}
> +
> +static int mbigen_acpi_create_domain(struct platform_device *pdev,
> +				     struct mbigen_device *mgn_chip)
> +{
> +	struct irq_domain *domain;
> +	u32 num_msis = 0;
> +	acpi_status status;
> +
> +	status = acpi_walk_resources(ACPI_HANDLE(&pdev->dev), METHOD_NAME__PRS,
> +				     mbigen_acpi_process_resource, &num_msis);
> +        if (ACPI_FAILURE(status) || num_msis == 0)
> +		return -EINVAL;
> +
> +	domain = platform_msi_create_device_domain(&pdev->dev, num_msis,
> +						   mbigen_write_msg,
> +						   &mbigen_domain_ops,
> +						   mgn_chip);
> +	if (!domain)
> +		return -ENOMEM;
> +
> +	return 0;
> +}
> +#else
> +static int mbigen_acpi_create_domain(struct platform_device *pdev,
> +				     struct mbigen_device *mgn_chip)
> +{
> +	return -ENODEV;
> +}
> +#endif
> +
>  static int mbigen_device_probe(struct platform_device *pdev)
>  {
>  	struct mbigen_device *mgn_chip;
> @@ -288,9 +337,17 @@ static int mbigen_device_probe(struct platform_device *pdev)
>  	if (IS_ERR(mgn_chip->base))
>  		return PTR_ERR(mgn_chip->base);
>  
> -	err = mbigen_of_create_domain(pdev, mgn_chip);
> -	if (err)
> +	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
> +		err = mbigen_of_create_domain(pdev, mgn_chip);
> +	else if (ACPI_COMPANION(&pdev->dev))
> +		err = mbigen_acpi_create_domain(pdev, mgn_chip);
> +	else
> +		err = -EINVAL;
> +
> +	if (err) {
> +		dev_err(&pdev->dev, "Failed to create mbi-gen@%p irqdomain", mgn_chip->base);
>  		return err;
> +	}
>  
>  	platform_set_drvdata(pdev, mgn_chip);
>  	return 0;
> @@ -302,10 +359,17 @@ static int mbigen_device_probe(struct platform_device *pdev)
>  };
>  MODULE_DEVICE_TABLE(of, mbigen_of_match);
>  
> +static const struct acpi_device_id mbigen_acpi_match[] = {
> +        { "HISI0152", 0 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(acpi, mbigen_acpi_match);
> +
>  static struct platform_driver mbigen_platform_driver = {
>  	.driver = {
>  		.name		= "Hisilicon MBIGEN-V2",
>  		.of_match_table	= mbigen_of_match,
> +		.acpi_match_table = ACPI_PTR(mbigen_acpi_match),
>  	},
>  	.probe			= mbigen_device_probe,
>  };
> -- 
> 1.9.1
> 

  reply	other threads:[~2017-01-13 10:21 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-11 15:06 [PATCH v7 00/15] ACPI platform MSI support and its example mbigen Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 01/15] ACPI: IORT: fix the indentation in iort_scan_node() Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 02/15] ACPI: IORT: add missing comment for iort_dev_find_its_id() Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 03/15] ACPI: IORT: minor cleanup for iort_match_node_callback() Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 04/15] irqchip: gic-v3-its: keep the head file include in alphabetic order Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 05/15] irqchip: gicv3-its: platform-msi: refactor its_pmsi_prepare() Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 06/15] irqchip: gicv3-its: platform-msi: refactor its_pmsi_init() to prepare for ACPI Hanjun Guo
2017-01-16 19:27   ` Matthias Brugger
2017-01-11 15:06 ` [PATCH v7 07/15] irqchip: gicv3-its: platform-msi: scan MADT to create platform msi domain Hanjun Guo
2017-01-17  9:25   ` Matthias Brugger
2017-01-11 15:06 ` [PATCH v7 08/15] ACPI: IORT: rename iort_node_map_rid() to make it generic Hanjun Guo
2017-01-13 11:47   ` Lorenzo Pieralisi
2017-01-14  3:25     ` Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 09/15] ACPI: platform-msi: retrieve dev id from IORT Hanjun Guo
2017-01-13 12:11   ` Lorenzo Pieralisi
2017-01-14  4:28     ` Hanjun Guo
2017-01-16 11:25       ` Lorenzo Pieralisi
2017-01-16 13:21         ` Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 10/15] ACPI: IORT: move over to iort_node_map_platform_id() Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 11/15] ACPI: platform: setup MSI domain for ACPI based platform device Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 12/15] msi: platform: make platform_msi_create_device_domain() ACPI aware Hanjun Guo
2017-01-13 10:45   ` Lorenzo Pieralisi
2017-01-14  3:00     ` Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 13/15] irqchip: mbigen: drop module owner Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 14/15] irqchip: mbigen: introduce mbigen_of_create_domain() Hanjun Guo
2017-01-11 15:06 ` [PATCH v7 15/15] irqchip: mbigen: Add ACPI support Hanjun Guo
2017-01-13 10:21   ` Lorenzo Pieralisi [this message]
2017-01-14  2:56     ` Hanjun Guo
2017-01-16 11:38       ` Lorenzo Pieralisi
2017-01-16 14:23         ` Hanjun Guo
2017-01-16 15:24           ` Lorenzo Pieralisi
2017-01-17 11:59             ` Hanjun Guo
2017-01-13 10:23 ` [PATCH v7 00/15] ACPI platform MSI support and its example mbigen Ming Lei
2017-01-14  1:04   ` Hanjun Guo
2017-01-13 14:11 ` Wei Xu
2017-01-14  4:30   ` Hanjun Guo
2017-01-16  5:12 ` Sinan Kaya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170113102104.GB20837@red-moon \
    --to=lorenzo.pieralisi@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).