From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM
Date: Sun, 15 Jan 2017 23:20:28 +0100 [thread overview]
Message-ID: <20170115222029.8271-2-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20170115222029.8271-1-martin.blumenstingl@googlemail.com>
The GXBB and GXL/GXM pinctrl drivers had a configuration which conflicts
with uart_ao_a. According to the GXBB ("S905") datasheet the AO UART
functions are:
- GPIOAO_0: Func1 = UART_TX_AO_A (bit 12), Func2 = UART_TX_AO_B (bit 26)
- GPIOAO_1: Func1 = UART_RX_AO_A (bit 11), Func2 = UART_RX_AO_B (bit 25)
- GPIOAO_4: Func2 = UART_TX_AO_B (bit 24)
- GPIOAO_5: Func2 = UART_RX_AO_B (bit 25)
The existing definition for uart_AO_A already uses GPIOAO_0 and GPIOAO_1.
The old definition of uart_AO_B however was broken, as it used GPIOAO_0
for TX (which would be fine) and two pins (GPIOAO_1 and GPIOAO_5) for RX
(which does not make any sense).
This fixes the uart_AO_B configuration by moving it to GPIOAO_4 and
GPIOAO_5 (it would be possible to use GPIOAO_0 and GPIOAO_1 in theory,
but all existing hardware uses uart_AO_A there).
The fix for GXBB and GXL/GXM is identical since it seems that these
specific pins are identical on both SoC variants.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 7 +++----
drivers/pinctrl/meson/pinctrl-meson-gxl.c | 7 +++----
2 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index c3928aa3fefa..e0bca4df2a2f 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -253,9 +253,8 @@ static const unsigned int uart_tx_ao_a_pins[] = { PIN(GPIOAO_0, 0) };
static const unsigned int uart_rx_ao_a_pins[] = { PIN(GPIOAO_1, 0) };
static const unsigned int uart_cts_ao_a_pins[] = { PIN(GPIOAO_2, 0) };
static const unsigned int uart_rts_ao_a_pins[] = { PIN(GPIOAO_3, 0) };
-static const unsigned int uart_tx_ao_b_pins[] = { PIN(GPIOAO_0, 0) };
-static const unsigned int uart_rx_ao_b_pins[] = { PIN(GPIOAO_1, 0),
- PIN(GPIOAO_5, 0) };
+static const unsigned int uart_tx_ao_b_pins[] = { PIN(GPIOAO_4, 0) };
+static const unsigned int uart_rx_ao_b_pins[] = { PIN(GPIOAO_5, 0) };
static const unsigned int uart_cts_ao_b_pins[] = { PIN(GPIOAO_2, 0) };
static const unsigned int uart_rts_ao_b_pins[] = { PIN(GPIOAO_3, 0) };
@@ -498,7 +497,7 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
GPIO_GROUP(GPIOAO_13, 0),
/* bank AO */
- GROUP(uart_tx_ao_b, 0, 26),
+ GROUP(uart_tx_ao_b, 0, 24),
GROUP(uart_rx_ao_b, 0, 25),
GROUP(uart_tx_ao_a, 0, 12),
GROUP(uart_rx_ao_a, 0, 11),
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 25694f7094c7..b69743b07a1d 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -214,9 +214,8 @@ static const unsigned int uart_tx_ao_a_pins[] = { PIN(GPIOAO_0, 0) };
static const unsigned int uart_rx_ao_a_pins[] = { PIN(GPIOAO_1, 0) };
static const unsigned int uart_cts_ao_a_pins[] = { PIN(GPIOAO_2, 0) };
static const unsigned int uart_rts_ao_a_pins[] = { PIN(GPIOAO_3, 0) };
-static const unsigned int uart_tx_ao_b_pins[] = { PIN(GPIOAO_0, 0) };
-static const unsigned int uart_rx_ao_b_pins[] = { PIN(GPIOAO_1, 0),
- PIN(GPIOAO_5, 0) };
+static const unsigned int uart_tx_ao_b_pins[] = { PIN(GPIOAO_4, 0) };
+static const unsigned int uart_rx_ao_b_pins[] = { PIN(GPIOAO_5, 0) };
static const unsigned int uart_cts_ao_b_pins[] = { PIN(GPIOAO_2, 0) };
static const unsigned int uart_rts_ao_b_pins[] = { PIN(GPIOAO_3, 0) };
@@ -409,7 +408,7 @@ static struct meson_pmx_group meson_gxl_aobus_groups[] = {
GPIO_GROUP(GPIOAO_9, 0),
/* bank AO */
- GROUP(uart_tx_ao_b, 0, 26),
+ GROUP(uart_tx_ao_b, 0, 24),
GROUP(uart_rx_ao_b, 0, 25),
GROUP(uart_tx_ao_a, 0, 12),
GROUP(uart_rx_ao_a, 0, 11),
--
2.11.0
next prev parent reply other threads:[~2017-01-15 22:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-15 22:20 [PATCH 0/2] add support for uart_AO_B Martin Blumenstingl
2017-01-15 22:20 ` Martin Blumenstingl [this message]
2017-01-18 10:21 ` [PATCH 1/2] pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM Linus Walleij
2017-01-18 21:40 ` Kevin Hilman
2017-01-15 22:20 ` [PATCH 2/2] ARM64: dts: meson-gx: add the missing uart_AO_B Martin Blumenstingl
2017-01-18 10:22 ` Linus Walleij
2017-01-18 21:43 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170115222029.8271-2-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox