From: mylene.josserand@free-electrons.com (Mylène Josserand)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/10] ASoC: sun4i-i2s: Add quirks to handle new compatible for reset
Date: Tue, 17 Jan 2017 15:02:24 +0100 [thread overview]
Message-ID: <20170117140230.23142-5-mylene.josserand@free-electrons.com> (raw)
In-Reply-To: <20170117140230.23142-1-mylene.josserand@free-electrons.com>
Some SoCs have a reset line that must be asserted/deasserted.
This patch adds a quirk to handle the new compatible
"allwinner,sun6i-a31-i2s" which will deassert the reset
line on probe function and assert it on remove's one.
This new compatible is useful in case of A33 codec driver, for example.
Signed-off-by: Myl?ne Josserand <mylene.josserand@free-electrons.com>
---
sound/soc/sunxi/sun4i-i2s.c | 57 +++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 55 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 4237323ef594..3635bbc72cbc 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -14,9 +14,11 @@
#include <linux/clk.h>
#include <linux/dmaengine.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
+#include <linux/reset.h>
#include <sound/dmaengine_pcm.h>
#include <sound/pcm_params.h>
@@ -92,6 +94,7 @@ struct sun4i_i2s {
struct clk *bus_clk;
struct clk *mod_clk;
struct regmap *regmap;
+ struct reset_control *rst;
unsigned int mclk_freq;
@@ -651,9 +654,22 @@ static int sun4i_i2s_runtime_suspend(struct device *dev)
return 0;
}
+struct sun4i_i2s_quirks {
+ bool has_reset;
+};
+
+static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = {
+ .has_reset = false,
+};
+
+static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = {
+ .has_reset = true,
+};
+
static int sun4i_i2s_probe(struct platform_device *pdev)
{
struct sun4i_i2s *i2s;
+ const struct sun4i_i2s_quirks *quirks;
struct resource *res;
void __iomem *regs;
int irq, ret;
@@ -674,6 +690,12 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
return irq;
}
+ quirks = of_device_get_match_data(&pdev->dev);
+ if (!quirks) {
+ dev_err(&pdev->dev, "Failed to determine the quirks to use\n");
+ return -ENODEV;
+ }
+
i2s->bus_clk = devm_clk_get(&pdev->dev, "apb");
if (IS_ERR(i2s->bus_clk)) {
dev_err(&pdev->dev, "Can't get our bus clock\n");
@@ -692,7 +714,24 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Can't get our mod clock\n");
return PTR_ERR(i2s->mod_clk);
}
-
+
+ if (quirks->has_reset) {
+ i2s->rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(i2s->rst)) {
+ dev_err(&pdev->dev, "Failed to get reset control\n");
+ return PTR_ERR(i2s->rst);
+ }
+ }
+
+ if (!IS_ERR(i2s->rst)) {
+ ret = reset_control_deassert(i2s->rst);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to deassert the reset control\n");
+ return -EINVAL;
+ }
+ }
+
i2s->playback_dma_data.addr = res->start + SUN4I_I2S_FIFO_TX_REG;
i2s->playback_dma_data.maxburst = 8;
@@ -727,23 +766,37 @@ static int sun4i_i2s_probe(struct platform_device *pdev)
sun4i_i2s_runtime_suspend(&pdev->dev);
err_pm_disable:
pm_runtime_disable(&pdev->dev);
+ if (!IS_ERR(i2s->rst))
+ reset_control_assert(i2s->rst);
return ret;
}
static int sun4i_i2s_remove(struct platform_device *pdev)
{
+ struct sun4i_i2s *i2s = dev_get_drvdata(&pdev->dev);
+
snd_dmaengine_pcm_unregister(&pdev->dev);
pm_runtime_disable(&pdev->dev);
if (!pm_runtime_status_suspended(&pdev->dev))
sun4i_i2s_runtime_suspend(&pdev->dev);
+ if (!IS_ERR(i2s->rst))
+ reset_control_assert(i2s->rst);
+
return 0;
}
static const struct of_device_id sun4i_i2s_match[] = {
- { .compatible = "allwinner,sun4i-a10-i2s", },
+ {
+ .compatible = "allwinner,sun4i-a10-i2s",
+ .data = &sun4i_a10_i2s_quirks,
+ },
+ {
+ .compatible = "allwinner,sun6i-a31-i2s",
+ .data = &sun6i_a31_i2s_quirks,
+ },
{}
};
MODULE_DEVICE_TABLE(of, sun4i_i2s_match);
--
2.11.0
next prev parent reply other threads:[~2017-01-17 14:02 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-17 14:02 [PATCH v2 00/10] Add sun8i A33 audio driver Mylène Josserand
2017-01-17 14:02 ` [PATCH v2 01/10] ASoC: sun4i-i2s: Increase DMA max burst to 8 Mylène Josserand
2017-01-17 16:41 ` Maxime Ripard
2017-01-17 18:44 ` Applied "ASoC: sun4i-i2s: Increase DMA max burst to 8" to the asoc tree Mark Brown
2017-01-17 14:02 ` [PATCH v2 02/10] clk: ccu-sun8i-a33: Add CLK_SET_RATE_PARENT to ac-dig Mylène Josserand
2017-01-17 16:44 ` Maxime Ripard
2017-01-18 7:58 ` Mylene Josserand
2017-01-17 14:02 ` [PATCH v2 03/10] dt-bindings: sound: Add new reset compatible for sun4i-i2s Mylène Josserand
2017-01-17 16:46 ` Maxime Ripard
2017-01-18 8:23 ` Mylene Josserand
2017-01-17 14:02 ` Mylène Josserand [this message]
2017-01-17 16:47 ` [PATCH v2 04/10] ASoC: sun4i-i2s: Add quirks to handle new compatible for reset Maxime Ripard
2017-01-17 14:02 ` [PATCH v2 05/10] ASoC: Add sun8i digital audio codec Mylène Josserand
2017-01-17 16:20 ` Mylene Josserand
2017-01-17 14:02 ` [PATCH v2 06/10] ASoC: sun8i-codec-analog: Add amplifier event to fix first delay Mylène Josserand
2017-01-17 16:49 ` Maxime Ripard
2017-02-03 12:03 ` Applied "ASoC: sun8i-codec-analog: Add amplifier event to fix first delay" to the asoc tree Mark Brown
2017-01-17 14:02 ` [PATCH v2 07/10] dt-bindings: sound: Add sun8i audio documentation Mylène Josserand
2017-01-17 16:50 ` Mark Brown
2017-01-18 8:25 ` Mylene Josserand
2017-01-17 16:51 ` Maxime Ripard
2017-01-17 14:02 ` [PATCH v2 08/10] ARM: dts: sun8i: Add audio codec, dai and card for A33 Mylène Josserand
2017-01-17 16:58 ` Maxime Ripard
2017-01-17 14:02 ` [PATCH v2 09/10] ARM: dts: sun8i: parrot: Enable audio nodes Mylène Josserand
2017-01-17 14:02 ` [PATCH v2 10/10] ARM: dts: sun8i: sinlinx: " Mylène Josserand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170117140230.23142-5-mylene.josserand@free-electrons.com \
--to=mylene.josserand@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox