From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Tue, 17 Jan 2017 17:29:31 -0800 Subject: [GIT PULL 2/2] Broadcom devicetree-arm64 changes for 4.11 In-Reply-To: <20170118012931.10964-1-f.fainelli@gmail.com> References: <20170118012931.10964-1-f.fainelli@gmail.com> Message-ID: <20170118012931.10964-2-f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following changes since commit 0c744ea4f77d72b3dcebb7a8f2684633ec79be88: Linux 4.10-rc2 (2017-01-01 14:31:53 -0800) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.11/devicetree-arm64 for you to fetch changes up to 096fe8726e5df2975ed29e1ecd881fa54c80878b: arm64: dts: NS2: add support for XMC form factor (2017-01-03 15:23:22 -0800) ---------------------------------------------------------------- This pull request contains Broadcom ARM64-based SoC Device Tree changes for 4.11, please pull the following changes: - Jon adds Device Tree nodes for the GICv2m and PAXB/PAXC PCIe interfaces on the Northstar 2 SoCs, he also enables PAXC on the Northstar 2 SVK reference board. He also updates the reserved memory entry for the Nitro firmware, required to get the on-chip NICs to work. Finally he adds support for the BCM958712DxXMC reference board which is a subset of existing boards. ---------------------------------------------------------------- Jon Mason (4): arm64: dts: NS2: enable GICv2m for PAXB/PAXC interfaces arm64: dts: NS2: enable PAXC on NS2 SVK arm64: dts: NS2: reserve memory for Nitro firmware arm64: dts: NS2: add support for XMC form factor arch/arm64/boot/dts/broadcom/Makefile | 2 +- arch/arm64/boot/dts/broadcom/ns2-svk.dts | 4 + arch/arm64/boot/dts/broadcom/ns2-xmc.dts | 191 +++++++++++++++++++++++++++++++ arch/arm64/boot/dts/broadcom/ns2.dtsi | 123 ++++++++++++++++---- 4 files changed, 295 insertions(+), 25 deletions(-) create mode 100644 arch/arm64/boot/dts/broadcom/ns2-xmc.dts