linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: fu.wei@linaro.org (fu.wei at linaro.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v20 10/17] clocksource/drivers/arm_arch_timer: Move arch_timer_needs_of_probing into DT init call
Date: Wed, 18 Jan 2017 21:25:34 +0800	[thread overview]
Message-ID: <20170118132541.8989-11-fu.wei@linaro.org> (raw)
In-Reply-To: <20170118132541.8989-1-fu.wei@linaro.org>

From: Fu Wei <fu.wei@linaro.org>

Because arch_timer_needs_of_probing is only for booting with device-tree,
but arch_timer_common_init is a generic init call which shouldn't include
the FW-specific code. It's better to put arch_timer_needs_of_probing into
DT init function.

But for per-cpu timer, the arch_timer_common_init is called from
arch_timer_init. For reaching the goal above, this patch disassemble
arch_timer_init and use arch_timer_register and arch_timer_common_init
directly, just like arch_timer_mem init code is doing.
By this way, all the DT relevant code are only called from DT init call.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
---
 drivers/clocksource/arm_arch_timer.c | 46 ++++++++++++++++--------------------
 1 file changed, 21 insertions(+), 25 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index d10c2f7..9db5fb9 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -825,9 +825,6 @@ static bool __init arch_timer_needs_of_probing(void)
 
 static int __init arch_timer_common_init(void)
 {
-	if (acpi_disabled && arch_timer_needs_of_probing())
-		return 0;
-
 	arch_timer_banner(arch_timers_present);
 	arch_counter_register(arch_timers_present);
 	return arch_timer_arch_init();
@@ -865,26 +862,9 @@ static enum arch_timer_ppi_nr __init arch_timer_select_ppi(void)
 	return ARCH_TIMER_PHYS_SECURE_PPI;
 }
 
-static int __init arch_timer_init(void)
-{
-	int ret;
-
-	ret = arch_timer_register();
-	if (ret)
-		return ret;
-
-	ret = arch_timer_common_init();
-	if (ret)
-		return ret;
-
-	arch_timer_kvm_info.virtual_irq = arch_timer_ppi[ARCH_TIMER_VIRT_PPI];
-
-	return 0;
-}
-
 static int __init arch_timer_of_init(struct device_node *np)
 {
-	int i;
+	int i, ret;
 
 	if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
 		pr_warn("multiple nodes in dt, skipping\n");
@@ -895,6 +875,8 @@ static int __init arch_timer_of_init(struct device_node *np)
 	for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++)
 		arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
 
+	arch_timer_kvm_info.virtual_irq = arch_timer_ppi[ARCH_TIMER_VIRT_PPI];
+
 	/*
 	 * Try to determine the frequency from the device tree,
 	 * if fail, get the frequency from the sysreg CNTFRQ.
@@ -933,7 +915,14 @@ static int __init arch_timer_of_init(struct device_node *np)
 	arch_counter_suspend_stop = of_property_read_bool(np,
 							 "arm,no-tick-in-suspend");
 
-	return arch_timer_init();
+	ret = arch_timer_register();
+	if (ret)
+		return ret;
+
+	if (arch_timer_needs_of_probing())
+		return 0;
+
+	return arch_timer_common_init();
 }
 CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
 CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
@@ -1021,7 +1010,8 @@ static int __init arch_timer_mem_init(struct device_node *np)
 	if (ret)
 		goto out;
 
-	return arch_timer_common_init();
+	if (!arch_timer_needs_of_probing())
+		ret = arch_timer_common_init();
 out:
 	iounmap(cntctlbase);
 	of_node_put(best_frame);
@@ -1050,6 +1040,7 @@ static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)
 /* Initialize per-processor generic timer */
 static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 {
+	int ret;
 	struct acpi_table_gtdt *gtdt;
 
 	if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
@@ -1077,6 +1068,8 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 		map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
 		gtdt->non_secure_el2_flags);
 
+	arch_timer_kvm_info.virtual_irq = arch_timer_ppi[ARCH_TIMER_VIRT_PPI];
+
 	/* Get the frequency from the sysreg CNTFRQ */
 	arch_timer_detect_rate();
 
@@ -1089,8 +1082,11 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 	/* Always-on capability */
 	arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
 
-	arch_timer_init();
-	return 0;
+	ret = arch_timer_register();
+	if (ret)
+		return ret;
+
+	return arch_timer_common_init();
 }
 CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
 #endif
-- 
2.9.3

  parent reply	other threads:[~2017-01-18 13:25 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-18 13:25 [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 01/17] clocksource/drivers/arm_arch_timer: Improve printk relevant code fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 02/17] clocksource/drivers/arm_arch_timer: Rename the timer type macros fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 03/17] clocksource/drivers/arm_arch_timer: Rename the PPI enum and its values fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 04/17] clocksource/drivers/arm_arch_timer: Move enums and defines to header file fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 05/17] clocksource/drivers/arm_arch_timer: Add a new enum for spi type fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 06/17] clocksource/drivers/arm_arch_timer: rework PPI determination fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 07/17] clocksource/drivers/arm_arch_timer: Separate out device-tree code from arch_timer_detect_rate fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection fu.wei at linaro.org
2017-01-19  8:02   ` Hanjun Guo
2017-01-19  9:44     ` Fu Wei
2017-01-19 12:41       ` Hanjun Guo
2017-01-24 17:24   ` Mark Rutland
2017-01-25  6:46     ` Fu Wei
2017-01-25  7:23       ` Fu Wei
2017-01-25 15:38       ` Christopher Covington
2017-01-25 17:36         ` Mark Rutland
2017-01-26  5:55           ` Fu Wei
2017-01-25 17:25       ` Mark Rutland
2017-01-26  5:49         ` Fu Wei
2017-01-30 17:49           ` Mark Rutland
2017-01-31 11:42             ` Mark Rutland
2017-01-31 18:43             ` Fu Wei
2017-01-31 18:49               ` Mark Rutland
2017-01-31 19:07                 ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 09/17] clocksource/drivers/arm_arch_timer: Refactor arch_timer_needs_probing fu.wei at linaro.org
2017-01-18 13:25 ` fu.wei at linaro.org [this message]
2017-01-18 13:25 ` [PATCH v20 11/17] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT fu.wei at linaro.org
2017-01-19  8:28   ` Hanjun Guo
2017-01-19  9:47     ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 12/17] clocksource/drivers/arm_arch_timer: Refactor MMIO timer probing fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 13/17] acpi/arm64: Add GTDT table parse driver fu.wei at linaro.org
2017-01-19  9:11   ` Hanjun Guo
2017-01-19 10:32     ` Fu Wei
2017-01-19 11:16       ` Mark Rutland
2017-01-19 12:28         ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 14/17] clocksource/drivers/arm_arch_timer: Simplify ACPI support code fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 15/17] acpi/arm64: Add memory-mapped timer support in GTDT driver fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 16/17] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer fu.wei at linaro.org
2017-01-19  9:16   ` Hanjun Guo
2017-01-19 10:02     ` Fu Wei
2017-01-19 12:42       ` Hanjun Guo
2017-01-18 13:25 ` [PATCH v20 17/17] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver fu.wei at linaro.org
2017-01-19  9:20 ` [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Hanjun Guo
2017-01-19 11:06   ` Fu Wei
2017-01-23 18:54 ` Mark Rutland
2017-01-24  5:11   ` Fu Wei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170118132541.8989-11-fu.wei@linaro.org \
    --to=fu.wei@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).