linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: fu.wei@linaro.org (fu.wei at linaro.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v20 02/17] clocksource/drivers/arm_arch_timer: Rename the timer type macros.
Date: Wed, 18 Jan 2017 21:25:26 +0800	[thread overview]
Message-ID: <20170118132541.8989-3-fu.wei@linaro.org> (raw)
In-Reply-To: <20170118132541.8989-1-fu.wei@linaro.org>

From: Fu Wei <fu.wei@linaro.org>

Rename the timer type macros to unify the format of macros in
arm_arch_timer.c, also update all the users of these macros.

No functional change.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
---
 drivers/clocksource/arm_arch_timer.c | 43 +++++++++++++++++++-----------------
 1 file changed, 23 insertions(+), 20 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 923bd5c..36998db 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -54,8 +54,8 @@
 #define CNTV_TVAL	0x38
 #define CNTV_CTL	0x3c
 
-#define ARCH_CP15_TIMER	BIT(0)
-#define ARCH_MEM_TIMER	BIT(1)
+#define ARCH_TIMER_TYPE_CP15		BIT(0)
+#define ARCH_TIMER_TYPE_MEM		BIT(1)
 static unsigned arch_timers_present __initdata;
 
 static void __iomem *arch_counter_base;
@@ -364,7 +364,7 @@ static void __arch_timer_setup(unsigned type,
 {
 	clk->features = CLOCK_EVT_FEAT_ONESHOT;
 
-	if (type == ARCH_CP15_TIMER) {
+	if (type == ARCH_TIMER_TYPE_CP15) {
 		if (arch_timer_c3stop)
 			clk->features |= CLOCK_EVT_FEAT_C3STOP;
 		clk->name = "arch_sys_timer";
@@ -481,7 +481,7 @@ static int arch_timer_starting_cpu(unsigned int cpu)
 	struct clock_event_device *clk = this_cpu_ptr(arch_timer_evt);
 	u32 flags;
 
-	__arch_timer_setup(ARCH_CP15_TIMER, clk);
+	__arch_timer_setup(ARCH_TIMER_TYPE_CP15, clk);
 
 	flags = check_ppi_trigger(arch_timer_ppi[arch_timer_uses_ppi]);
 	enable_percpu_irq(arch_timer_ppi[arch_timer_uses_ppi], flags);
@@ -525,16 +525,17 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
 static void arch_timer_banner(unsigned type)
 {
 	pr_info("%s%s%s timer(s) running at %lu.%02luMHz (%s%s%s).\n",
-		type & ARCH_CP15_TIMER ? "cp15" : "",
-		type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ?  " and " : "",
-		type & ARCH_MEM_TIMER ? "mmio" : "",
+		type & ARCH_TIMER_TYPE_CP15 ? "cp15" : "",
+		type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ?
+			" and " : "",
+		type & ARCH_TIMER_TYPE_MEM ? "mmio" : "",
 		(unsigned long)arch_timer_rate / 1000000,
 		(unsigned long)(arch_timer_rate / 10000) % 100,
-		type & ARCH_CP15_TIMER ?
+		type & ARCH_TIMER_TYPE_CP15 ?
 			(arch_timer_uses_ppi == VIRT_PPI) ? "virt" : "phys" :
 			"",
-		type == (ARCH_CP15_TIMER | ARCH_MEM_TIMER) ?  "/" : "",
-		type & ARCH_MEM_TIMER ?
+		type == (ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM) ? "/" : "",
+		type & ARCH_TIMER_TYPE_MEM ?
 			arch_timer_mem_use_virtual ? "virt" : "phys" :
 			"");
 }
@@ -600,7 +601,7 @@ static void __init arch_counter_register(unsigned type)
 	u64 start_count;
 
 	/* Register the CP15 based counter if we have one */
-	if (type & ARCH_CP15_TIMER) {
+	if (type & ARCH_TIMER_TYPE_CP15) {
 		if (IS_ENABLED(CONFIG_ARM64) || arch_timer_uses_ppi == VIRT_PPI)
 			arch_timer_read_counter = arch_counter_get_cntvct;
 		else
@@ -772,7 +773,7 @@ static int __init arch_timer_mem_register(void __iomem *base, unsigned int irq)
 
 	t->base = base;
 	t->evt.irq = irq;
-	__arch_timer_setup(ARCH_MEM_TIMER, &t->evt);
+	__arch_timer_setup(ARCH_TIMER_TYPE_MEM, &t->evt);
 
 	if (arch_timer_mem_use_virtual)
 		func = arch_timer_handler_virt_mem;
@@ -815,13 +816,15 @@ arch_timer_needs_probing(int type, const struct of_device_id *matches)
 
 static int __init arch_timer_common_init(void)
 {
-	unsigned mask = ARCH_CP15_TIMER | ARCH_MEM_TIMER;
+	unsigned mask = ARCH_TIMER_TYPE_CP15 | ARCH_TIMER_TYPE_MEM;
 
 	/* Wait until both nodes are probed if we have two timers */
 	if ((arch_timers_present & mask) != mask) {
-		if (arch_timer_needs_probing(ARCH_MEM_TIMER, arch_timer_mem_of_match))
+		if (arch_timer_needs_probing(ARCH_TIMER_TYPE_MEM,
+					     arch_timer_mem_of_match))
 			return 0;
-		if (arch_timer_needs_probing(ARCH_CP15_TIMER, arch_timer_of_match))
+		if (arch_timer_needs_probing(ARCH_TIMER_TYPE_CP15,
+					     arch_timer_of_match))
 			return 0;
 	}
 
@@ -881,12 +884,12 @@ static int __init arch_timer_of_init(struct device_node *np)
 {
 	int i;
 
-	if (arch_timers_present & ARCH_CP15_TIMER) {
+	if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
 		pr_warn("multiple nodes in dt, skipping\n");
 		return 0;
 	}
 
-	arch_timers_present |= ARCH_CP15_TIMER;
+	arch_timers_present |= ARCH_TIMER_TYPE_CP15;
 	for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
 		arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
 
@@ -927,7 +930,7 @@ static int __init arch_timer_mem_init(struct device_node *np)
 	unsigned int irq, ret = -EINVAL;
 	u32 cnttidr;
 
-	arch_timers_present |= ARCH_MEM_TIMER;
+	arch_timers_present |= ARCH_TIMER_TYPE_MEM;
 	cntctlbase = of_iomap(np, 0);
 	if (!cntctlbase) {
 		pr_err("Can't find CNTCTLBase\n");
@@ -1027,14 +1030,14 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
 {
 	struct acpi_table_gtdt *gtdt;
 
-	if (arch_timers_present & ARCH_CP15_TIMER) {
+	if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
 		pr_warn("already initialized, skipping\n");
 		return -EINVAL;
 	}
 
 	gtdt = container_of(table, struct acpi_table_gtdt, header);
 
-	arch_timers_present |= ARCH_CP15_TIMER;
+	arch_timers_present |= ARCH_TIMER_TYPE_CP15;
 
 	arch_timer_ppi[PHYS_SECURE_PPI] =
 		map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
-- 
2.9.3

  parent reply	other threads:[~2017-01-18 13:25 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-18 13:25 [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 01/17] clocksource/drivers/arm_arch_timer: Improve printk relevant code fu.wei at linaro.org
2017-01-18 13:25 ` fu.wei at linaro.org [this message]
2017-01-18 13:25 ` [PATCH v20 03/17] clocksource/drivers/arm_arch_timer: Rename the PPI enum and its values fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 04/17] clocksource/drivers/arm_arch_timer: Move enums and defines to header file fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 05/17] clocksource/drivers/arm_arch_timer: Add a new enum for spi type fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 06/17] clocksource/drivers/arm_arch_timer: rework PPI determination fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 07/17] clocksource/drivers/arm_arch_timer: Separate out device-tree code from arch_timer_detect_rate fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection fu.wei at linaro.org
2017-01-19  8:02   ` Hanjun Guo
2017-01-19  9:44     ` Fu Wei
2017-01-19 12:41       ` Hanjun Guo
2017-01-24 17:24   ` Mark Rutland
2017-01-25  6:46     ` Fu Wei
2017-01-25  7:23       ` Fu Wei
2017-01-25 15:38       ` Christopher Covington
2017-01-25 17:36         ` Mark Rutland
2017-01-26  5:55           ` Fu Wei
2017-01-25 17:25       ` Mark Rutland
2017-01-26  5:49         ` Fu Wei
2017-01-30 17:49           ` Mark Rutland
2017-01-31 11:42             ` Mark Rutland
2017-01-31 18:43             ` Fu Wei
2017-01-31 18:49               ` Mark Rutland
2017-01-31 19:07                 ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 09/17] clocksource/drivers/arm_arch_timer: Refactor arch_timer_needs_probing fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 10/17] clocksource/drivers/arm_arch_timer: Move arch_timer_needs_of_probing into DT init call fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 11/17] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT fu.wei at linaro.org
2017-01-19  8:28   ` Hanjun Guo
2017-01-19  9:47     ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 12/17] clocksource/drivers/arm_arch_timer: Refactor MMIO timer probing fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 13/17] acpi/arm64: Add GTDT table parse driver fu.wei at linaro.org
2017-01-19  9:11   ` Hanjun Guo
2017-01-19 10:32     ` Fu Wei
2017-01-19 11:16       ` Mark Rutland
2017-01-19 12:28         ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 14/17] clocksource/drivers/arm_arch_timer: Simplify ACPI support code fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 15/17] acpi/arm64: Add memory-mapped timer support in GTDT driver fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 16/17] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer fu.wei at linaro.org
2017-01-19  9:16   ` Hanjun Guo
2017-01-19 10:02     ` Fu Wei
2017-01-19 12:42       ` Hanjun Guo
2017-01-18 13:25 ` [PATCH v20 17/17] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver fu.wei at linaro.org
2017-01-19  9:20 ` [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Hanjun Guo
2017-01-19 11:06   ` Fu Wei
2017-01-23 18:54 ` Mark Rutland
2017-01-24  5:11   ` Fu Wei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170118132541.8989-3-fu.wei@linaro.org \
    --to=fu.wei@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).