From: fu.wei@linaro.org (fu.wei at linaro.org)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v20 04/17] clocksource/drivers/arm_arch_timer: Move enums and defines to header file.
Date: Wed, 18 Jan 2017 21:25:28 +0800 [thread overview]
Message-ID: <20170118132541.8989-5-fu.wei@linaro.org> (raw)
In-Reply-To: <20170118132541.8989-1-fu.wei@linaro.org>
From: Fu Wei <fu.wei@linaro.org>
To support the arm_arch_timer via ACPI we need to share defines and enums
between the driver and the ACPI parser code.
So we split out the relevant defines and enums into arm_arch_timer.h.
No functional change.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
---
drivers/clocksource/arm_arch_timer.c | 11 -----------
include/clocksource/arm_arch_timer.h | 12 ++++++++++++
2 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index d5a1664..90b6661 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -54,8 +54,6 @@
#define CNTV_TVAL 0x38
#define CNTV_CTL 0x3c
-#define ARCH_TIMER_TYPE_CP15 BIT(0)
-#define ARCH_TIMER_TYPE_MEM BIT(1)
static unsigned arch_timers_present __initdata;
static void __iomem *arch_counter_base;
@@ -68,15 +66,6 @@ struct arch_timer {
#define to_arch_timer(e) container_of(e, struct arch_timer, evt)
static u32 arch_timer_rate;
-
-enum arch_timer_ppi_nr {
- ARCH_TIMER_PHYS_SECURE_PPI,
- ARCH_TIMER_PHYS_NONSECURE_PPI,
- ARCH_TIMER_VIRT_PPI,
- ARCH_TIMER_HYP_PPI,
- ARCH_TIMER_MAX_TIMER_PPI
-};
-
static int arch_timer_ppi[ARCH_TIMER_MAX_TIMER_PPI];
static struct clock_event_device __percpu *arch_timer_evt;
diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
index caedb74..b898637 100644
--- a/include/clocksource/arm_arch_timer.h
+++ b/include/clocksource/arm_arch_timer.h
@@ -16,9 +16,13 @@
#ifndef __CLKSOURCE_ARM_ARCH_TIMER_H
#define __CLKSOURCE_ARM_ARCH_TIMER_H
+#include <linux/bitops.h>
#include <linux/timecounter.h>
#include <linux/types.h>
+#define ARCH_TIMER_TYPE_CP15 BIT(0)
+#define ARCH_TIMER_TYPE_MEM BIT(1)
+
#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
#define ARCH_TIMER_CTRL_IT_MASK (1 << 1)
#define ARCH_TIMER_CTRL_IT_STAT (1 << 2)
@@ -34,6 +38,14 @@ enum arch_timer_reg {
ARCH_TIMER_REG_TVAL,
};
+enum arch_timer_ppi_nr {
+ ARCH_TIMER_PHYS_SECURE_PPI,
+ ARCH_TIMER_PHYS_NONSECURE_PPI,
+ ARCH_TIMER_VIRT_PPI,
+ ARCH_TIMER_HYP_PPI,
+ ARCH_TIMER_MAX_TIMER_PPI
+};
+
#define ARCH_TIMER_PHYS_ACCESS 0
#define ARCH_TIMER_VIRT_ACCESS 1
#define ARCH_TIMER_MEM_PHYS_ACCESS 2
--
2.9.3
next prev parent reply other threads:[~2017-01-18 13:25 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-18 13:25 [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 01/17] clocksource/drivers/arm_arch_timer: Improve printk relevant code fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 02/17] clocksource/drivers/arm_arch_timer: Rename the timer type macros fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 03/17] clocksource/drivers/arm_arch_timer: Rename the PPI enum and its values fu.wei at linaro.org
2017-01-18 13:25 ` fu.wei at linaro.org [this message]
2017-01-18 13:25 ` [PATCH v20 05/17] clocksource/drivers/arm_arch_timer: Add a new enum for spi type fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 06/17] clocksource/drivers/arm_arch_timer: rework PPI determination fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 07/17] clocksource/drivers/arm_arch_timer: Separate out device-tree code from arch_timer_detect_rate fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection fu.wei at linaro.org
2017-01-19 8:02 ` Hanjun Guo
2017-01-19 9:44 ` Fu Wei
2017-01-19 12:41 ` Hanjun Guo
2017-01-24 17:24 ` Mark Rutland
2017-01-25 6:46 ` Fu Wei
2017-01-25 7:23 ` Fu Wei
2017-01-25 15:38 ` Christopher Covington
2017-01-25 17:36 ` Mark Rutland
2017-01-26 5:55 ` Fu Wei
2017-01-25 17:25 ` Mark Rutland
2017-01-26 5:49 ` Fu Wei
2017-01-30 17:49 ` Mark Rutland
2017-01-31 11:42 ` Mark Rutland
2017-01-31 18:43 ` Fu Wei
2017-01-31 18:49 ` Mark Rutland
2017-01-31 19:07 ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 09/17] clocksource/drivers/arm_arch_timer: Refactor arch_timer_needs_probing fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 10/17] clocksource/drivers/arm_arch_timer: Move arch_timer_needs_of_probing into DT init call fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 11/17] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT fu.wei at linaro.org
2017-01-19 8:28 ` Hanjun Guo
2017-01-19 9:47 ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 12/17] clocksource/drivers/arm_arch_timer: Refactor MMIO timer probing fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 13/17] acpi/arm64: Add GTDT table parse driver fu.wei at linaro.org
2017-01-19 9:11 ` Hanjun Guo
2017-01-19 10:32 ` Fu Wei
2017-01-19 11:16 ` Mark Rutland
2017-01-19 12:28 ` Fu Wei
2017-01-18 13:25 ` [PATCH v20 14/17] clocksource/drivers/arm_arch_timer: Simplify ACPI support code fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 15/17] acpi/arm64: Add memory-mapped timer support in GTDT driver fu.wei at linaro.org
2017-01-18 13:25 ` [PATCH v20 16/17] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer fu.wei at linaro.org
2017-01-19 9:16 ` Hanjun Guo
2017-01-19 10:02 ` Fu Wei
2017-01-19 12:42 ` Hanjun Guo
2017-01-18 13:25 ` [PATCH v20 17/17] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver fu.wei at linaro.org
2017-01-19 9:20 ` [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Hanjun Guo
2017-01-19 11:06 ` Fu Wei
2017-01-23 18:54 ` Mark Rutland
2017-01-24 5:11 ` Fu Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170118132541.8989-5-fu.wei@linaro.org \
--to=fu.wei@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).