[PATCH v13 0/7] Enable PMUs in ACPI systems

[PATCH v13 0/7] Enable PMUs in ACPI systems

[Jeremy Linton]

This patch expands and reworks the patches published by Mark Salter
in order to clean up a few of the previous review comments, as well as
add support for newer CPUs and big/little configurations.

v13:
- Correct int/bool conversion bug in pmu_acpi_init()

v12:
- Rebase to 4.10
- Removed lock in the hotplug path.

v11:
- Add is_smp() check to read_specific_cpuid() for arch/arm. Update
  c_show() and various routines in arm_pmu_acpi() to use the macro.
- Moved the duplicate "generic" pmu detection code into its own
  patch and hoist it into arm_pmu_device_probe() so it works
  for DT based systems as well.

v10:
- Rebase to 4.9
- Rework the arm_perf_start_cpu changes to support the 4.9 hotplug
  changes.
- Remove the call to acpi_register_gsi() from the cpu online code path.
  Instead the GSI's are registered during the initcall. This changes
  the error handling a bit because we now try to clean up the
  previously registered GSIs in a couple important places. This
  was also a result of the rebase.
- Dropped the MIDR partnumber usage, its no longer necessary to
  differentiate by only the partnum, so this helps to clarify the code
  a bit. 
- Shuffle some code around and rename a few variables.
- Added a few comments to hopefully clarify some questions people have
  previously had about unused MADT entries, skipping processing cores
  with MIDR=0, etc.

v9:
- Add/cleanup an additional hotplug patch I've had sitting around. This
  patch brings the ACPI PMU mostly on par with the DT functionality with
  respect to having CPUs offline during boot. This should help clarify
  some of the code structuring.
- Cleanup the list of PMU types early if we fail to allocate memory for an
  additional pmu type.

v8:
- Rebase to 4.8rc4
- Assorted minor comment/hunk placement/etc tweaks per Punit Agrawal

v7:
- Rebase to 4.8rc3
- Remove cpu affinity sysfs entry. While providing a CPU mask for
  ARMv8 PMU's is really helpful in big/little environments, reworking
  the PMU code to support the cpumask attribute for !arm64 PMUs is out
  of the scope of this patch set.
- Fix CPU miscount problem where an alloc failure followed by successfully
  allocating the structure can result in under counting the CPUs associated
  with the PMU. This bug was created in v6 with the conversion to a linked
  list.
-  Remove initial platform device creation code by Mark Salter, and re-squash
   multiple platform device creation code together with helper routines.
   Other minor tweakage.

Jeremy Linton (6):
  arm64: Rename the common MADT parse routine
  arm: arm64: Add routine to determine cpuid of other cpus
  arm: arm64: pmu: Assign platform PMU CPU affinity
  arm64: pmu: Detect multiple generic PMUs and append counter
  arm64: pmu: Detect and enable multiple PMUs in an ACPI system
  arm: pmu: Add PMU definitions for cores not initially online

Mark Salter (1):
  arm64: pmu: Cache PMU interrupt numbers from MADT parse

 arch/arm/include/asm/cputype.h   |   4 +
 arch/arm/kernel/setup.c          |   2 +-
 arch/arm64/include/asm/cputype.h |   3 +
 arch/arm64/kernel/perf_event.c   |   2 +-
 arch/arm64/kernel/smp.c          |  18 ++-
 drivers/perf/Kconfig             |   4 +
 drivers/perf/Makefile            |   1 +
 drivers/perf/arm_pmu.c           | 103 +++++++++++++--
 drivers/perf/arm_pmu_acpi.c      | 271 +++++++++++++++++++++++++++++++++++++++
 include/linux/perf/arm_pmu.h     |  12 ++
 10 files changed, 400 insertions(+), 20 deletions(-)
 create mode 100644 drivers/perf/arm_pmu_acpi.c

-- 
2.5.5

[PATCH v13 1/7] arm64: Rename the common MADT parse routine

[Jeremy Linton]

The MADT parser in smp.c is now being used to parse
out NUMA, PMU and ACPI parking protocol information as
well as the GIC information for which it was originally
created. Rename it to avoid a misleading name.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 arch/arm64/kernel/smp.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index cb87234..8ea244c 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -517,13 +517,14 @@ static unsigned int cpu_count = 1;
 
 #ifdef CONFIG_ACPI
 /*
- * acpi_map_gic_cpu_interface - parse processor MADT entry
+ * acpi_verify_and_map_madt - parse processor MADT entry
  *
  * Carry out sanity checks on MADT processor entry and initialize
- * cpu_logical_map on success
+ * cpu_logical_map, the ACPI parking protocol, NUMA mapping
+ * and the PMU interrupts on success
  */
 static void __init
-acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
+acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)
 {
 	u64 hwid = processor->arm_mpidr;
 
@@ -577,7 +578,7 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
 }
 
 static int __init
-acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
+acpi_parse_madt_common(struct acpi_subtable_header *header,
 			     const unsigned long end)
 {
 	struct acpi_madt_generic_interrupt *processor;
@@ -588,7 +589,7 @@ acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
 
 	acpi_table_print_madt_entry(header);
 
-	acpi_map_gic_cpu_interface(processor);
+	acpi_verify_and_map_madt(processor);
 
 	return 0;
 }
@@ -672,7 +673,7 @@ void __init smp_init_cpus(void)
 		 * we need for SMP init
 		 */
 		acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
-				      acpi_parse_gic_cpu_interface, 0);
+				      acpi_parse_madt_common, 0);
 
 	if (cpu_count > nr_cpu_ids)
 		pr_warn("Number of cores (%d) exceeds configured maximum of %d - clipping\n",
-- 
2.5.5

[PATCH v13 1/7] arm64: Rename the common MADT parse routine

[Hanjun Guo]

Hi Jeremy,

On 2017/1/18 4:50, Jeremy Linton wrote:
> The MADT parser in smp.c is now being used to parse
> out NUMA, PMU and ACPI parking protocol information as
> well as the GIC information for which it was originally
> created. Rename it to avoid a misleading name.
>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
>  arch/arm64/kernel/smp.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
> index cb87234..8ea244c 100644
> --- a/arch/arm64/kernel/smp.c
> +++ b/arch/arm64/kernel/smp.c
> @@ -517,13 +517,14 @@ static unsigned int cpu_count = 1;
>
>  #ifdef CONFIG_ACPI
>  /*
> - * acpi_map_gic_cpu_interface - parse processor MADT entry
> + * acpi_verify_and_map_madt - parse processor MADT entry
>   *
>   * Carry out sanity checks on MADT processor entry and initialize
> - * cpu_logical_map on success
> + * cpu_logical_map, the ACPI parking protocol, NUMA mapping
> + * and the PMU interrupts on success
>   */
>  static void __init
> -acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
> +acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)

Nit, MADT is a table includes multi type of table entries, we just
need to map the the processor type, how about updating it to
acpi_verify_and_map_madt_processor()?

Thanks
Hanjun

[PATCH v13 1/7] arm64: Rename the common MADT parse routine

[Jeremy Linton]

Hi,

Thanks for taking a look at this!

On 01/18/2017 09:51 PM, Hanjun Guo wrote:
> Hi Jeremy,
>
> On 2017/1/18 4:50, Jeremy Linton wrote:
>> The MADT parser in smp.c is now being used to parse
>> out NUMA, PMU and ACPI parking protocol information as
>> well as the GIC information for which it was originally
>> created. Rename it to avoid a misleading name.
>>
>> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
>> ---
>>  arch/arm64/kernel/smp.c | 13 +++++++------
>>  1 file changed, 7 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
>> index cb87234..8ea244c 100644
>> --- a/arch/arm64/kernel/smp.c
>> +++ b/arch/arm64/kernel/smp.c
>> @@ -517,13 +517,14 @@ static unsigned int cpu_count = 1;
>>
>>  #ifdef CONFIG_ACPI
>>  /*
>> - * acpi_map_gic_cpu_interface - parse processor MADT entry
>> + * acpi_verify_and_map_madt - parse processor MADT entry
>>   *
>>   * Carry out sanity checks on MADT processor entry and initialize
>> - * cpu_logical_map on success
>> + * cpu_logical_map, the ACPI parking protocol, NUMA mapping
>> + * and the PMU interrupts on success
>>   */
>>  static void __init
>> -acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt
>> *processor)
>> +acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)
>
> Nit, MADT is a table includes multi type of table entries, we just
> need to map the the processor type, how about updating it to
> acpi_verify_and_map_madt_processor()?

The rename was originally proposed in a previous review comment because 
the thought was that the code is now parsing more than just the GIC->CPU 
information. That is even though the subtable type its parsing is 
described as the "GIC CPU interface" in the ACPI specification.

So, in a way, I think the original gic_cpu_interface() name is more 
descriptive than acpi_verify_and_map_madt_processor(), but I'm pretty 
agnostic about what the name is. Particularly, since MADT itself is 
misleading.

So, I don't see a need to respin this, simply to rename it, unless 
someone has a strong opinion one way or the other. Primary, because I 
would like to get this set merged and the right decision might just be 
to drop this patch.


Thanks,

[PATCH v13 1/7] arm64: Rename the common MADT parse routine

[Lorenzo Pieralisi]

On Tue, Jan 17, 2017 at 02:50:04PM -0600, Jeremy Linton wrote:
> The MADT parser in smp.c is now being used to parse
> out NUMA, PMU and ACPI parking protocol information as

Nit: It is not used to parse PMU yet at this stage so
either you remove PMU from the list or you move this patch
to the end of the series.

> well as the GIC information for which it was originally
> created. Rename it to avoid a misleading name.

It is funny smp.c never mapped _any_ GIC information :) (even
though it parses the MADT GIC CPU interface entries).

> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
>  arch/arm64/kernel/smp.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
> index cb87234..8ea244c 100644
> --- a/arch/arm64/kernel/smp.c
> +++ b/arch/arm64/kernel/smp.c
> @@ -517,13 +517,14 @@ static unsigned int cpu_count = 1;
>  
>  #ifdef CONFIG_ACPI
>  /*
> - * acpi_map_gic_cpu_interface - parse processor MADT entry
> + * acpi_verify_and_map_madt - parse processor MADT entry
>   *
>   * Carry out sanity checks on MADT processor entry and initialize
> - * cpu_logical_map on success
> + * cpu_logical_map, the ACPI parking protocol, NUMA mapping
> + * and the PMU interrupts on success
>   */
>  static void __init
> -acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
> +acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)

acpi_map_madt_cpu_entry()

or just drop this patch to avoid useless bikeshedding, your choice.

>  {
>  	u64 hwid = processor->arm_mpidr;
>  
> @@ -577,7 +578,7 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
>  }
>  
>  static int __init
> -acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
> +acpi_parse_madt_common(struct acpi_subtable_header *header,
>  			     const unsigned long end)

acpi_madt_parse_cpus()

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

>  {
>  	struct acpi_madt_generic_interrupt *processor;
> @@ -588,7 +589,7 @@ acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
>  
>  	acpi_table_print_madt_entry(header);
>  
> -	acpi_map_gic_cpu_interface(processor);
> +	acpi_verify_and_map_madt(processor);
>  
>  	return 0;
>  }
> @@ -672,7 +673,7 @@ void __init smp_init_cpus(void)
>  		 * we need for SMP init
>  		 */
>  		acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
> -				      acpi_parse_gic_cpu_interface, 0);
> +				      acpi_parse_madt_common, 0);
>  
>  	if (cpu_count > nr_cpu_ids)
>  		pr_warn("Number of cores (%d) exceeds configured maximum of %d - clipping\n",
> -- 
> 2.5.5
> 

[PATCH v13 1/7] arm64: Rename the common MADT parse routine

[Jeremy Linton]

Hi,

On 01/20/2017 10:22 AM, Lorenzo Pieralisi wrote:
> On Tue, Jan 17, 2017 at 02:50:04PM -0600, Jeremy Linton wrote:
>> The MADT parser in smp.c is now being used to parse
>> out NUMA, PMU and ACPI parking protocol information as
>
> Nit: It is not used to parse PMU yet at this stage so
> either you remove PMU from the list or you move this patch
> to the end of the series.

(per comments below)
I think the best plan is to drop it in the next spin of the series, 
although as Will has shown that he is skillful at cherry picking patches 
out of this series, so maybe that won't be necessary? Of course 3/7 
probably won't apply cleanly without this one.

>
>> well as the GIC information for which it was originally
>> created. Rename it to avoid a misleading name.
>
> It is funny smp.c never mapped _any_ GIC information :) (even
> though it parses the MADT GIC CPU interface entries).

<OT chuckle> Ha, map is pretty generic outside of LK and more accurately 
reflects the "mapping" from one structure/element to another, more so 
than parse (of which I'm a prime offender, particularly in the previous 
comment). </OT chuckle>


(trimming)
>>  static void __init
>> -acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
>> +acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)
>
> acpi_map_madt_cpu_entry()
>
> or just drop this patch to avoid useless bikeshedding, your choice.
>
>>  {
>>  	u64 hwid = processor->arm_mpidr;
>>
>> @@ -577,7 +578,7 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
>>  }
>>
>>  static int __init
>> -acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
>> +acpi_parse_madt_common(struct acpi_subtable_header *header,
>>  			     const unsigned long end)
>
> acpi_madt_parse_cpus()
>
> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>
>>  {
>>  	struct acpi_madt_generic_interrupt *processor;

(trimming)

[PATCH v13 2/7] arm: arm64: Add routine to determine cpuid of other cpus

[Jeremy Linton]

It is helpful if we can read the cpuid/midr of other CPUs
in the system independent of arm/arm64.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 arch/arm/include/asm/cputype.h   | 4 ++++
 arch/arm/kernel/setup.c          | 2 +-
 arch/arm64/include/asm/cputype.h | 3 +++
 3 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 522b5fe..1e87d06 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -235,6 +235,10 @@ static inline unsigned int __attribute_const__ read_cpuid_mpidr(void)
 #define cpu_is_sa1100() (read_cpuid_part() == ARM_CPU_PART_SA1100)
 #define cpu_is_sa1110() (read_cpuid_part() == ARM_CPU_PART_SA1110)
 
+#define read_specific_cpuid(cpu_num) (is_smp() ? \
+				      per_cpu_ptr(&cpu_data, cpu_num)->cpuid \
+				      : read_cpuid_id())
+
 /*
  * Intel's XScale3 core supports some v6 features (supersections, L2)
  * but advertises itself as v5 as it does not support the v6 ISA.  For
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 34e3f3c..d443c97 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1217,7 +1217,7 @@ static int c_show(struct seq_file *m, void *v)
 		 * "processor".  Give glibc what it expects.
 		 */
 		seq_printf(m, "processor\t: %d\n", i);
-		cpuid = is_smp() ? per_cpu(cpu_data, i).cpuid : read_cpuid_id();
+		cpuid = read_specific_cpuid(i);
 		seq_printf(m, "model name\t: %s rev %d (%s)\n",
 			   cpu_name, cpuid & 15, elf_platform);
 
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 26a68dd..a6d26e1 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -124,6 +124,9 @@ static inline u32 __attribute_const__ read_cpuid_cachetype(void)
 {
 	return read_cpuid(CTR_EL0);
 }
+
+#define read_specific_cpuid(cpu_num) per_cpu_ptr(&cpu_data, cpu_num)->reg_midr
+
 #endif /* __ASSEMBLY__ */
 
 #endif
-- 
2.5.5

[PATCH v13 3/7] arm64: pmu: Cache PMU interrupt numbers from MADT parse

[Jeremy Linton]

From: Mark Salter <msalter@redhat.com>

In the case of ACPI, the PMU IRQ information is contained in the
MADT table. Also, since the PMU does not exist as a device in the
ACPI DSDT table, it is necessary to create a platform device so
that the appropriate driver probing is triggered. Since the platform
device creation needs to happen after the CPU's have been started, and
the MADT parsing needs to happen before, we save off the interrupt
numbers discovered during the parsing.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 arch/arm64/kernel/smp.c      |  5 +++++
 drivers/perf/Kconfig         |  4 ++++
 drivers/perf/Makefile        |  1 +
 drivers/perf/arm_pmu_acpi.c  | 40 ++++++++++++++++++++++++++++++++++++++++
 include/linux/perf/arm_pmu.h |  7 +++++++
 5 files changed, 57 insertions(+)
 create mode 100644 drivers/perf/arm_pmu_acpi.c

diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 8ea244c..cbaab44 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -37,6 +37,7 @@
 #include <linux/completion.h>
 #include <linux/of.h>
 #include <linux/irq_work.h>
+#include <linux/perf/arm_pmu.h>
 
 #include <asm/alternative.h>
 #include <asm/atomic.h>
@@ -552,6 +553,7 @@ acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)
 		}
 		bootcpu_valid = true;
 		early_map_cpu_to_node(0, acpi_numa_get_nid(0, hwid));
+		arm_pmu_parse_acpi(0, processor);
 		return;
 	}
 
@@ -572,6 +574,9 @@ acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)
 	 */
 	acpi_set_mailbox_entry(cpu_count, processor);
 
+	/* get PMU irq info */
+	arm_pmu_parse_acpi(cpu_count, processor);
+
 	early_map_cpu_to_node(cpu_count, acpi_numa_get_nid(cpu_count, hwid));
 
 	cpu_count++;
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 4d5c5f9..697df05 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -19,4 +19,8 @@ config XGENE_PMU
         help
           Say y if you want to use APM X-Gene SoC performance monitors.
 
+config ARM_PMU_ACPI
+	def_bool y
+	depends on ARM_PMU && ACPI
+
 endmenu
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index b116e98..d1d7762 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_ARM_PMU) += arm_pmu.o
 obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
+obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
new file mode 100644
index 0000000..2008001
--- /dev/null
+++ b/drivers/perf/arm_pmu_acpi.c
@@ -0,0 +1,40 @@
+/*
+ * ARM ACPI PMU support
+ *
+ * Copyright (C) 2015 Red Hat Inc.
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include <asm/cpu.h>
+#include <linux/acpi.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
+#include <linux/list.h>
+#include <linux/perf/arm_pmu.h>
+#include <linux/platform_device.h>
+
+struct pmu_irq {
+	int  gsi;
+	int  trigger;
+	bool used;
+};
+
+static struct pmu_irq pmu_irqs[NR_CPUS];
+
+/*
+ * Called from acpi_verify_and_map_madt()'s MADT parsing during boot.
+ * This routine saves off the GSI's and their trigger state for use when we are
+ * ready to build the PMU platform device.
+ */
+void __init arm_pmu_parse_acpi(int cpu, struct acpi_madt_generic_interrupt *gic)
+{
+	pmu_irqs[cpu].gsi = gic->performance_interrupt;
+	if (gic->flags & ACPI_MADT_PERFORMANCE_IRQ_MODE)
+		pmu_irqs[cpu].trigger = ACPI_EDGE_SENSITIVE;
+	else
+		pmu_irqs[cpu].trigger = ACPI_LEVEL_SENSITIVE;
+}
diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
index 8462da2..df1ba55 100644
--- a/include/linux/perf/arm_pmu.h
+++ b/include/linux/perf/arm_pmu.h
@@ -164,4 +164,11 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 
 #endif /* CONFIG_ARM_PMU */
 
+#ifdef CONFIG_ARM_PMU_ACPI
+struct acpi_madt_generic_interrupt;
+void arm_pmu_parse_acpi(int cpu, struct acpi_madt_generic_interrupt *gic);
+#else
+#define arm_pmu_parse_acpi(a, b) do { } while (0)
+#endif /* CONFIG_ARM_PMU_ACPI */
+
 #endif /* __ARM_PMU_H__ */
-- 
2.5.5

[PATCH v13 3/7] arm64: pmu: Cache PMU interrupt numbers from MADT parse

[Lorenzo Pieralisi]

On Tue, Jan 17, 2017 at 02:50:06PM -0600, Jeremy Linton wrote:
> From: Mark Salter <msalter@redhat.com>
> 
> In the case of ACPI, the PMU IRQ information is contained in the
> MADT table. Also, since the PMU does not exist as a device in the
> ACPI DSDT table, it is necessary to create a platform device so
> that the appropriate driver probing is triggered. Since the platform
> device creation needs to happen after the CPU's have been started, and
> the MADT parsing needs to happen before, we save off the interrupt
> numbers discovered during the parsing.
> 
> Signed-off-by: Mark Salter <msalter@redhat.com>
> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
> ---
>  arch/arm64/kernel/smp.c      |  5 +++++
>  drivers/perf/Kconfig         |  4 ++++
>  drivers/perf/Makefile        |  1 +
>  drivers/perf/arm_pmu_acpi.c  | 40 ++++++++++++++++++++++++++++++++++++++++
>  include/linux/perf/arm_pmu.h |  7 +++++++
>  5 files changed, 57 insertions(+)
>  create mode 100644 drivers/perf/arm_pmu_acpi.c
> 
> diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
> index 8ea244c..cbaab44 100644
> --- a/arch/arm64/kernel/smp.c
> +++ b/arch/arm64/kernel/smp.c
> @@ -37,6 +37,7 @@
>  #include <linux/completion.h>
>  #include <linux/of.h>
>  #include <linux/irq_work.h>
> +#include <linux/perf/arm_pmu.h>
>  
>  #include <asm/alternative.h>
>  #include <asm/atomic.h>
> @@ -552,6 +553,7 @@ acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)
>  		}
>  		bootcpu_valid = true;
>  		early_map_cpu_to_node(0, acpi_numa_get_nid(0, hwid));
> +		arm_pmu_parse_acpi(0, processor);
>  		return;
>  	}
>  
> @@ -572,6 +574,9 @@ acpi_verify_and_map_madt(struct acpi_madt_generic_interrupt *processor)
>  	 */
>  	acpi_set_mailbox_entry(cpu_count, processor);
>  
> +	/* get PMU irq info */
> +	arm_pmu_parse_acpi(cpu_count, processor);
> +
>  	early_map_cpu_to_node(cpu_count, acpi_numa_get_nid(cpu_count, hwid));
>  
>  	cpu_count++;
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 4d5c5f9..697df05 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -19,4 +19,8 @@ config XGENE_PMU
>          help
>            Say y if you want to use APM X-Gene SoC performance monitors.
>  
> +config ARM_PMU_ACPI
> +	def_bool y
> +	depends on ARM_PMU && ACPI
> +
>  endmenu
> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
> index b116e98..d1d7762 100644
> --- a/drivers/perf/Makefile
> +++ b/drivers/perf/Makefile
> @@ -1,2 +1,3 @@
>  obj-$(CONFIG_ARM_PMU) += arm_pmu.o
>  obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
> +obj-$(CONFIG_ARM_PMU_ACPI) += arm_pmu_acpi.o
> diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
> new file mode 100644
> index 0000000..2008001
> --- /dev/null
> +++ b/drivers/perf/arm_pmu_acpi.c
> @@ -0,0 +1,40 @@
> +/*
> + * ARM ACPI PMU support
> + *
> + * Copyright (C) 2015 Red Hat Inc.
> + * Author: Mark Salter <msalter@redhat.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2.  See
> + * the COPYING file in the top-level directory.
> + *
> + */
> +
> +#include <asm/cpu.h>
> +#include <linux/acpi.h>
> +#include <linux/irq.h>
> +#include <linux/irqdesc.h>
> +#include <linux/list.h>
> +#include <linux/perf/arm_pmu.h>
> +#include <linux/platform_device.h>

Nit: You should trim this include list, it is hardly needed in this patch
stand-alone.

> +struct pmu_irq {
> +	int  gsi;
> +	int  trigger;
> +	bool used;
> +};
> +
> +static struct pmu_irq pmu_irqs[NR_CPUS];
> +
> +/*
> + * Called from acpi_verify_and_map_madt()'s MADT parsing during boot.

You will have to update the function name according to what we end up doing
in patch 1.

> + * This routine saves off the GSI's and their trigger state for use when we are
> + * ready to build the PMU platform device.
> + */
> +void __init arm_pmu_parse_acpi(int cpu, struct acpi_madt_generic_interrupt *gic)
> +{
> +	pmu_irqs[cpu].gsi = gic->performance_interrupt;
> +	if (gic->flags & ACPI_MADT_PERFORMANCE_IRQ_MODE)
> +		pmu_irqs[cpu].trigger = ACPI_EDGE_SENSITIVE;
> +	else
> +		pmu_irqs[cpu].trigger = ACPI_LEVEL_SENSITIVE;
> +}
> diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
> index 8462da2..df1ba55 100644
> --- a/include/linux/perf/arm_pmu.h
> +++ b/include/linux/perf/arm_pmu.h
> @@ -164,4 +164,11 @@ int arm_pmu_device_probe(struct platform_device *pdev,
>  
>  #endif /* CONFIG_ARM_PMU */
>  
> +#ifdef CONFIG_ARM_PMU_ACPI
> +struct acpi_madt_generic_interrupt;
> +void arm_pmu_parse_acpi(int cpu, struct acpi_madt_generic_interrupt *gic);

Adding __init tag here too would not hurt.

Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

> +#else
> +#define arm_pmu_parse_acpi(a, b) do { } while (0)
> +#endif /* CONFIG_ARM_PMU_ACPI */
> +
>  #endif /* __ARM_PMU_H__ */
> -- 
> 2.5.5
> 

[PATCH v13 4/7] arm: arm64: pmu: Assign platform PMU CPU affinity

[Jeremy Linton]

On systems with multiple PMU types the PMU to CPU affinity
needs to be detected and set. The CPU to interrupt affinity
should also be set.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 drivers/perf/arm_pmu.c | 43 +++++++++++++++++++++++++++++++++----------
 1 file changed, 33 insertions(+), 10 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 6d93358..37e241f 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -11,6 +11,7 @@
  */
 #define pr_fmt(fmt) "hw perfevents: " fmt
 
+#include <linux/acpi.h>
 #include <linux/bitmap.h>
 #include <linux/cpumask.h>
 #include <linux/cpu_pm.h>
@@ -24,6 +25,7 @@
 #include <linux/irq.h>
 #include <linux/irqdesc.h>
 
+#include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/irq_regs.h>
 
@@ -889,25 +891,47 @@ static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu)
 }
 
 /*
- * CPU PMU identification and probing.
+ * CPU PMU identification and probing. Its possible to have
+ * multiple CPU types in an ARM machine. Assure that we are
+ * picking the right PMU types based on the CPU in question
  */
-static int probe_current_pmu(struct arm_pmu *pmu,
-			     const struct pmu_probe_info *info)
+static int probe_plat_pmu(struct arm_pmu *pmu,
+			     const struct pmu_probe_info *info,
+			     unsigned int pmuid)
 {
-	int cpu = get_cpu();
-	unsigned int cpuid = read_cpuid_id();
 	int ret = -ENODEV;
+	int cpu;
+	int aff_ctr = 0;
+	struct platform_device *pdev = pmu->plat_device;
+	int irq = platform_get_irq(pdev, 0);
 
-	pr_info("probing PMU on CPU %d\n", cpu);
+	if (irq >= 0 && !irq_is_percpu(irq)) {
+		pmu->irq_affinity = kcalloc(pdev->num_resources, sizeof(int),
+					    GFP_KERNEL);
+		if (!pmu->irq_affinity)
+			return -ENOMEM;
+	}
+
+	for_each_possible_cpu(cpu) {
+		unsigned int cpuid = read_specific_cpuid(cpu);
+
+		if (cpuid == pmuid) {
+			cpumask_set_cpu(cpu, &pmu->supported_cpus);
+			if (pmu->irq_affinity) {
+				pmu->irq_affinity[aff_ctr] = cpu;
+				aff_ctr++;
+			}
+		}
+	}
 
+	/* find the type of PMU given the CPU */
 	for (; info->init != NULL; info++) {
-		if ((cpuid & info->mask) != info->cpuid)
+		if ((pmuid & info->mask) != info->cpuid)
 			continue;
 		ret = info->init(pmu);
 		break;
 	}
 
-	put_cpu();
 	return ret;
 }
 
@@ -1043,8 +1067,7 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 		if (!ret)
 			ret = init_fn(pmu);
 	} else if (probe_table) {
-		cpumask_setall(&pmu->supported_cpus);
-		ret = probe_current_pmu(pmu, probe_table);
+		ret = probe_plat_pmu(pmu, probe_table, read_cpuid_id());
 	}
 
 	if (ret) {
-- 
2.5.5

[PATCH v13 5/7] arm64: pmu: Detect multiple generic PMUs and append counter

[Jeremy Linton]

In heterogeneous CPU systems its likely that there are multiple
PMU types. If a system is using the generic armv8_pmuv3 rather
than a PMU with a hard-coded set of events then we want to uniquely
identify each PMU in /sys. We do this by appending an "_x" to the
pmu name. This then creates PMUs like, "armv8_pmuv3" and
"armv8_pmuv3_1", "armv8_pmuv3_2" for a system with 3 PMU types.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 arch/arm64/kernel/perf_event.c |  2 +-
 drivers/perf/arm_pmu.c         | 20 ++++++++++++++++++++
 include/linux/perf/arm_pmu.h   |  1 +
 3 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 57ae9d9..0fbd7ef 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -1002,7 +1002,7 @@ static void armv8_pmu_init(struct arm_pmu *cpu_pmu)
 static int armv8_pmuv3_init(struct arm_pmu *cpu_pmu)
 {
 	armv8_pmu_init(cpu_pmu);
-	cpu_pmu->name			= "armv8_pmuv3";
+	cpu_pmu->name			= ARMV8_PMUV3_DESCRIPTION;
 	cpu_pmu->map_event		= armv8_pmuv3_map_event;
 	cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] =
 		&armv8_pmuv3_events_attr_group;
diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 37e241f..85566f6 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -1035,6 +1035,7 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 			 const struct of_device_id *of_table,
 			 const struct pmu_probe_info *probe_table)
 {
+	static int duplicate_pmus;
 	const struct of_device_id *of_id;
 	const int (*init_fn)(struct arm_pmu *);
 	struct device_node *node = pdev->dev.of_node;
@@ -1075,6 +1076,25 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 		goto out_free;
 	}
 
+	/*
+	 * if this pmu declaration is a generic pmu and we have
+	 * previously found a generic pmu on this platform
+	 * then append a PMU number to the pmu name. This avoids
+	 * changing the names of PMUs that are specific to a class
+	 * of CPUs. The assumption is that if we match a specific PMU
+	 * then it's unique, and another PMU in the system will match
+	 * a different entry rather than needing the _number to
+	 * assure its unique.
+	 */
+	if (!strcmp(pmu->name, ARMV8_PMUV3_DESCRIPTION)) {
+		if (duplicate_pmus) {
+			pmu->name = kasprintf(GFP_KERNEL, "%s_%d",
+					      pmu->name, duplicate_pmus);
+			if (!pmu->name)
+				goto out_free;
+		}
+		duplicate_pmus++;
+	}
 
 	ret = cpu_pmu_init(pmu);
 	if (ret)
diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
index df1ba55..42b5edb 100644
--- a/include/linux/perf/arm_pmu.h
+++ b/include/linux/perf/arm_pmu.h
@@ -161,6 +161,7 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 			 const struct pmu_probe_info *probe_table);
 
 #define ARMV8_PMU_PDEV_NAME "armv8-pmu"
+#define ARMV8_PMUV3_DESCRIPTION "armv8_pmuv3"
 
 #endif /* CONFIG_ARM_PMU */
 
-- 
2.5.5

[PATCH v13 6/7] arm64: pmu: Detect and enable multiple PMUs in an ACPI system

[Jeremy Linton]

Its possible that an ACPI system has multiple CPU types in it
with differing PMU counters. Iterate the CPU's and make a determination
about how many of each type exist in the system. Then take and create
a PMU platform device for each type, and assign it the interrupts parsed
from the MADT. Creating a platform device is necessary because the PMUs
are not described as devices in the DSDT table.

This code is loosely based on earlier work by Mark Salter.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 drivers/perf/arm_pmu.c      |   8 +-
 drivers/perf/arm_pmu_acpi.c | 231 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 238 insertions(+), 1 deletion(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 85566f6..77ec1ae 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -1068,7 +1068,13 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 		if (!ret)
 			ret = init_fn(pmu);
 	} else if (probe_table) {
-		ret = probe_plat_pmu(pmu, probe_table, read_cpuid_id());
+		if (acpi_disabled) {
+			/* use the current cpu. */
+			ret = probe_plat_pmu(pmu, probe_table,
+					     read_cpuid_id());
+		} else {
+			ret = probe_plat_pmu(pmu, probe_table, pdev->id);
+		}
 	}
 
 	if (ret) {
diff --git a/drivers/perf/arm_pmu_acpi.c b/drivers/perf/arm_pmu_acpi.c
index 2008001..6e0488f 100644
--- a/drivers/perf/arm_pmu_acpi.c
+++ b/drivers/perf/arm_pmu_acpi.c
@@ -2,13 +2,17 @@
  * ARM ACPI PMU support
  *
  * Copyright (C) 2015 Red Hat Inc.
+ * Copyright (C) 2016 ARM Ltd.
  * Author: Mark Salter <msalter@redhat.com>
+ *	   Jeremy Linton <jeremy.linton@arm.com>
  *
  * This work is licensed under the terms of the GNU GPL, version 2.  See
  * the COPYING file in the top-level directory.
  *
  */
 
+#define pr_fmt(fmt) "ACPI-PMU: " fmt
+
 #include <asm/cpu.h>
 #include <linux/acpi.h>
 #include <linux/irq.h>
@@ -20,9 +24,16 @@
 struct pmu_irq {
 	int  gsi;
 	int  trigger;
+	int  irq;
 	bool used;
 };
 
+struct pmu_types {
+	struct list_head list;
+	int		 cpu_type;
+	int		 cpu_count;
+};
+
 static struct pmu_irq pmu_irqs[NR_CPUS];
 
 /*
@@ -38,3 +49,223 @@ void __init arm_pmu_parse_acpi(int cpu, struct acpi_madt_generic_interrupt *gic)
 	else
 		pmu_irqs[cpu].trigger = ACPI_LEVEL_SENSITIVE;
 }
+
+static void __init arm_pmu_acpi_handle_alloc_failure(struct list_head *pmus)
+{
+	int i;
+	struct pmu_types *pmu, *safe_temp;
+
+	list_for_each_entry_safe(pmu, safe_temp, pmus, list) {
+		list_del(&pmu->list);
+		kfree(pmu);
+	}
+
+	for_each_possible_cpu(i)
+		if (pmu_irqs[i].irq > 0)
+			acpi_unregister_gsi(pmu_irqs[i].gsi);
+}
+
+/*
+ * Count number and type of CPU cores in the system. Returns the number
+ * of "unused" MADT entries we could not associate with a PMU. This can
+ * be the result of CPU's not being online,  or errors in the MADT.
+ * Under normal circumstances this will be 0.
+ */
+static int __init arm_pmu_acpi_determine_cpu_types(struct list_head *pmus)
+{
+	int i;
+	int unused_madt_entries = 0;
+
+	for_each_possible_cpu(i) {
+		u32 reg_midr = read_specific_cpuid(i);
+		struct pmu_types *pmu;
+
+		/*
+		 * Ignore GSI registration failure for now, as
+		 * some of the MADT entries may not be used.
+		 */
+		pmu_irqs[i].irq = acpi_register_gsi(NULL, pmu_irqs[i].gsi,
+						    pmu_irqs[i].trigger,
+						    ACPI_ACTIVE_HIGH);
+		/* likely not online */
+		if (reg_midr == 0) {
+			unused_madt_entries++;
+			continue;
+		}
+
+		list_for_each_entry(pmu, pmus, list) {
+			if (pmu->cpu_type == reg_midr) {
+				pmu->cpu_count++;
+				break;
+			}
+		}
+
+		/* we didn't find the CPU type, add an entry to identify it */
+		if (&pmu->list == pmus) {
+			pmu = kzalloc(sizeof(struct pmu_types), GFP_KERNEL);
+			if (!pmu) {
+				pr_err("Unable to allocate pmu_types\n");
+				arm_pmu_acpi_handle_alloc_failure(pmus);
+				break;
+			}
+			pmu->cpu_type = reg_midr;
+			pmu->cpu_count++;
+			list_add_tail(&pmu->list, pmus);
+		}
+	}
+
+	return unused_madt_entries;
+}
+
+static int __init arm_pmu_acpi_register_device(int count, struct resource *res,
+					       int cpu_id)
+{
+	struct platform_device *pdev;
+	int err = -ENOMEM;
+
+	pdev = platform_device_alloc(ARMV8_PMU_PDEV_NAME, cpu_id);
+	if (pdev) {
+		err = platform_device_add_resources(pdev, res, count);
+		if (!err)
+			err = platform_device_add(pdev);
+		if (err) {
+			pr_warn("Unable to register PMU device\n");
+			platform_device_put(pdev);
+		}
+	} else {
+	    pr_warn("Unable to allocate platform device\n");
+	}
+
+	return err;
+}
+
+static void __init arm_pmu_acpi_unregister_pmu_gsi(int cpu_id)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+
+		if (read_specific_cpuid(i) == cpu_id) {
+			pmu_irqs[i].used = false;
+			if (pmu_irqs[i].irq > 0)
+				acpi_unregister_gsi(pmu_irqs[i].gsi);
+			pmu_irqs[i].gsi = -ENODEV;
+		}
+	}
+}
+
+/*
+ * Registers the group of PMU interfaces which correspond to the 'cpu_id'.
+ * This group utilizes 'count' resources in the 'res'.
+ */
+static int __init arm_pmu_acpi_register_pmu(int count, struct resource *res,
+					    int cpu_id)
+{
+	int err;
+
+	err = arm_pmu_acpi_register_device(count, res, cpu_id);
+
+	/* unmark and unregister GSIs for this PMU */
+	if (err)
+		arm_pmu_acpi_unregister_pmu_gsi(cpu_id);
+
+	return err;
+}
+
+int arm_pmu_acpi_retrieve_irq(struct resource *res, int cpu)
+{
+	int irq = -ENODEV;
+
+	if (pmu_irqs[cpu].used) {
+		pr_info("CPU %d's interrupt is already used\n", cpu);
+	} else {
+		pmu_irqs[cpu].used = true;
+		res->start = pmu_irqs[cpu].irq;
+		res->end = pmu_irqs[cpu].irq;
+		res->flags = IORESOURCE_IRQ;
+		if (pmu_irqs[cpu].trigger == ACPI_EDGE_SENSITIVE)
+			res->flags |= IORESOURCE_IRQ_HIGHEDGE;
+		else
+			res->flags |= IORESOURCE_IRQ_HIGHLEVEL;
+	}
+	return irq;
+}
+
+/*
+ * For the given cpu/pmu type, walk all known GSIs, register them, and add
+ * them to the resource structure. Return the number of GSI's contained
+ * in the res structure, and the id of the last CPU/PMU we added.
+ */
+static int __init arm_pmu_acpi_gsi_res(struct pmu_types *pmus,
+				       struct resource *res)
+{
+	int i, count;
+
+	/* lets group all the PMU's from similar CPU's together */
+	count = 0;
+	for_each_possible_cpu(i) {
+		u32 reg_midr = read_specific_cpuid(i);
+
+		if (pmus->cpu_type == reg_midr) {
+			if ((pmu_irqs[i].gsi == 0) && (reg_midr != 0))
+				continue;
+
+			/* likely not online */
+			if (!reg_midr)
+				continue;
+
+			arm_pmu_acpi_retrieve_irq(&res[count], i);
+			count++;
+		}
+	}
+	return count;
+}
+
+static int __init pmu_acpi_register(struct pmu_types *pmu)
+{
+	int count;
+	int err = -ENOMEM;
+	struct resource	*res;
+
+	res = kcalloc(pmu->cpu_count, sizeof(struct resource), GFP_KERNEL);
+
+	/* for a given PMU type, collect all the GSIs. */
+	if (res) {
+		count = arm_pmu_acpi_gsi_res(pmu, res);
+		/* register this set of interrupts with a new PMU device */
+		err = arm_pmu_acpi_register_pmu(pmu->cpu_count, res,
+						pmu->cpu_type);
+		if (!err)
+			pr_info("Register %d devices for %X\n", count,
+				pmu->cpu_type);
+		kfree(res);
+	} else {
+		pr_warn("PMU unable to allocate interrupt resource\n");
+		arm_pmu_acpi_unregister_pmu_gsi(pmu->cpu_type);
+	}
+	return err;
+}
+
+static int __init pmu_acpi_init(void)
+{
+	struct pmu_types *pmu, *safe_temp;
+	int unused_madt_entries;
+	LIST_HEAD(pmus);
+
+	if (acpi_disabled)
+		return 0;
+
+	unused_madt_entries = arm_pmu_acpi_determine_cpu_types(&pmus);
+
+	list_for_each_entry_safe(pmu, safe_temp, &pmus, list) {
+		pmu->cpu_count += unused_madt_entries;
+		pmu_acpi_register(pmu);
+
+		list_del(&pmu->list);
+		kfree(pmu);
+	}
+
+	return 0;
+}
+
+arch_initcall(pmu_acpi_init);
-- 
2.5.5

[PATCH v13 7/7] arm: pmu: Add PMU definitions for cores not initially online

[Jeremy Linton]

ACPI CPUs aren't associated with a PMU until they have been put
online. This means that we potentially have to update a PMU
definition the first time a CPU is hot added to the machine.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 drivers/perf/arm_pmu.c       | 34 ++++++++++++++++++++++++++++++++--
 include/linux/perf/arm_pmu.h |  4 ++++
 2 files changed, 36 insertions(+), 2 deletions(-)

diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c
index 77ec1ae..cf5122f 100644
--- a/drivers/perf/arm_pmu.c
+++ b/drivers/perf/arm_pmu.c
@@ -711,6 +711,26 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
 	return 0;
 }
 
+static void arm_perf_associate_new_cpu(struct arm_pmu *lpmu, unsigned int cpu)
+{
+	struct platform_device *pdev = lpmu->plat_device;
+	struct resource *res;
+	struct pmu_hw_events *events;
+	int num_res;
+
+	for (num_res = 0; num_res < pdev->num_resources; num_res++) {
+		if (!pdev->resource[num_res].flags)
+			break;
+	}
+	res = &pdev->resource[num_res];
+	arm_pmu_acpi_retrieve_irq(res, cpu);
+	events = per_cpu_ptr(lpmu->hw_events, cpu);
+	cpumask_set_cpu(cpu, &lpmu->supported_cpus);
+	if (lpmu->irq_affinity)
+		lpmu->irq_affinity[num_res] = cpu;
+	events->percpu_pmu = lpmu;
+}
+
 /*
  * PMU hardware loses all context when a CPU goes offline.
  * When a CPU is hotplugged back in, since some hardware registers are
@@ -721,10 +741,18 @@ static int arm_perf_starting_cpu(unsigned int cpu, struct hlist_node *node)
 {
 	struct arm_pmu *pmu = hlist_entry_safe(node, struct arm_pmu, node);
 
-	if (!cpumask_test_cpu(cpu, &pmu->supported_cpus))
-		return 0;
+	if (!cpumask_test_cpu(cpu, &pmu->supported_cpus)) {
+		unsigned int cpuid = read_specific_cpuid(cpu);
+
+		if (acpi_disabled)
+			return 0;
+		if (cpuid != pmu->id)
+			return 0;
+		arm_perf_associate_new_cpu(pmu, cpu);
+	}
 	if (pmu->reset)
 		pmu->reset(pmu);
+
 	return 0;
 }
 
@@ -905,6 +933,8 @@ static int probe_plat_pmu(struct arm_pmu *pmu,
 	struct platform_device *pdev = pmu->plat_device;
 	int irq = platform_get_irq(pdev, 0);
 
+	pmu->id = pmuid;
+
 	if (irq >= 0 && !irq_is_percpu(irq)) {
 		pmu->irq_affinity = kcalloc(pdev->num_resources, sizeof(int),
 					    GFP_KERNEL);
diff --git a/include/linux/perf/arm_pmu.h b/include/linux/perf/arm_pmu.h
index 42b5edb..f652cd1 100644
--- a/include/linux/perf/arm_pmu.h
+++ b/include/linux/perf/arm_pmu.h
@@ -112,6 +112,7 @@ struct arm_pmu {
 	struct mutex	reserve_mutex;
 	u64		max_period;
 	bool		secure_access; /* 32-bit ARM only */
+	unsigned int	id;
 #define ARMV8_PMUV3_MAX_COMMON_EVENTS 0x40
 	DECLARE_BITMAP(pmceid_bitmap, ARMV8_PMUV3_MAX_COMMON_EVENTS);
 	struct platform_device	*plat_device;
@@ -168,8 +169,11 @@ int arm_pmu_device_probe(struct platform_device *pdev,
 #ifdef CONFIG_ARM_PMU_ACPI
 struct acpi_madt_generic_interrupt;
 void arm_pmu_parse_acpi(int cpu, struct acpi_madt_generic_interrupt *gic);
+int arm_pmu_acpi_retrieve_irq(struct resource *pdev, int cpu);
 #else
 #define arm_pmu_parse_acpi(a, b) do { } while (0)
+#define arm_pmu_acpi_retrieve_irq(pdev, cpu) \
+	do { } while (0)
 #endif /* CONFIG_ARM_PMU_ACPI */
 
 #endif /* __ARM_PMU_H__ */
-- 
2.5.5

[PATCH v13 0/7] Enable PMUs in ACPI systems

[Hanjun Guo]

On 2017/1/18 4:50, Jeremy Linton wrote:
> This patch expands and reworks the patches published by Mark Salter
> in order to clean up a few of the previous review comments, as well as
> add support for newer CPUs and big/little configurations.
>
> v13:
> - Correct int/bool conversion bug in pmu_acpi_init()

I tested this patch set on Hisilicon D03 and using "perf list"
then I can get hardware event which it's not available before
adding this patch set, and "perf stat -e <event>" works fine
with available perf event.

Tested-by: Hanjun Guo <hanjun.guo@linaro.org>

Thanks
Hanjun