From mboxrd@z Thu Jan 1 00:00:00 1970 From: rask@formelder.dk (Rask Ingemann Lambertsen) Date: Sat, 21 Jan 2017 17:11:43 +0100 Subject: [PATCH] regulator: axp20x: AXP806: Fix dcdcb being set instead of dcdce Message-ID: <20170121161142.g4zslhohb6vvcvwd@localhost> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org A typo or copy-paste bug means that the register access intended for regulator dcdce goes to dcdcb instead. This patch corrects it. Signed-off-by: Rask Ingemann Lambertsen Fixes: 2ca342d391e3 (regulator: axp20x: Support AXP806 variant) --- I have a board where dcdcb powers the DRAM, which I found running at 2.05 V rather than 1.50 V. The bug was introduced nearly five months ago. Thanks must go to Samsung for making DRAM chips which tolerate that sort of abuse. drivers/regulator/axp20x-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index e6a512e..a3ade9e 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -272,7 +272,7 @@ static const struct regulator_desc axp806_regulators[] = { 64, AXP806_DCDCD_V_CTRL, 0x3f, AXP806_PWR_OUT_CTRL1, BIT(3)), AXP_DESC(AXP806, DCDCE, "dcdce", "vine", 1100, 3400, 100, - AXP806_DCDCB_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(4)), + AXP806_DCDCE_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(4)), AXP_DESC(AXP806, ALDO1, "aldo1", "aldoin", 700, 3300, 100, AXP806_ALDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL1, BIT(5)), AXP_DESC(AXP806, ALDO2, "aldo2", "aldoin", 700, 3400, 100, -- 2.10.2 -- Rask Ingemann Lambertsen