public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: djkurtz@chromium.org (Daniel Kurtz)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] spi: When no dma_chan map buffers with spi_master's parent
Date: Fri, 27 Jan 2017 00:21:53 +0800	[thread overview]
Message-ID: <20170126162154.124287-1-djkurtz@chromium.org> (raw)

Back before commit 1dccb598df54 ("arm64: simplify dma_get_ops"), for
arm64, devices for which dma_ops were not explicitly set were automatically
configured to use swiotlb_dma_ops, since this was hard-coded as the
global "dma_ops" in arm64_dma_init().

Now that global "dma_ops" has been removed, all devices much have their
dma_ops explicitly set by a call to arch_setup_dma_ops(), otherwise the
device is assigned dummy_dma_ops, and thus calls to map_sg for such a
device will fail (return 0).

Mediatek SPI uses DMA but does not use a dma channel.  Support for this
was added by commit c37f45b5f1cd ("spi: support spi without dma channel
to use can_dma()"), which uses the master_spi dev to DMA map buffers.

The master_spi device is not a platform device, rather it is created
in spi_alloc_device(), and therefore its dma_ops are never set.

Therefore, when the mediatek SPI driver when it does DMA (for large SPI
transactions > 32 bytes), SPI will use spi_map_buf()->dma_map_sg() to
map the buffer for use in DMA.  But dma_map_sg()->dma_map_sg_attrs() returns
0, because ops->map_sg is dummy_dma_ops->__dummy_map_sg, and hence
spi_map_buf() returns -ENOMEM (-12).

Fix this by using the real spi_master's parent device which should be a
real physical device with DMA properties.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Fixes: c37f45b5f1cd ("spi: support spi without dma channel to use can_dma()")
Cc: Leilk Liu <leilk.liu@mediatek.com>
---
 drivers/spi/spi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 656dd3e3220c..f4d412e48e1c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -805,12 +805,12 @@ static int __spi_map_msg(struct spi_master *master, struct spi_message *msg)
 	if (master->dma_tx)
 		tx_dev = master->dma_tx->device->dev;
 	else
-		tx_dev = &master->dev;
+		tx_dev = master->dev.parent;
 
 	if (master->dma_rx)
 		rx_dev = master->dma_rx->device->dev;
 	else
-		rx_dev = &master->dev;
+		rx_dev = master->dev.parent;
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 		if (!master->can_dma(master, msg->spi, xfer))
@@ -852,12 +852,12 @@ static int __spi_unmap_msg(struct spi_master *master, struct spi_message *msg)
 	if (master->dma_tx)
 		tx_dev = master->dma_tx->device->dev;
 	else
-		tx_dev = &master->dev;
+		tx_dev = master->dev.parent;
 
 	if (master->dma_rx)
 		rx_dev = master->dma_rx->device->dev;
 	else
-		rx_dev = &master->dev;
+		rx_dev = master->dev.parent;
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 		if (!master->can_dma(master, msg->spi, xfer))
-- 
2.11.0.483.g087da7b7c-goog

             reply	other threads:[~2017-01-26 16:21 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-26 16:21 Daniel Kurtz [this message]
2017-01-26 16:21 ` [PATCH 2/2] spi: mediatek: Only do dma for 4-byte aligned buffers Daniel Kurtz
2017-01-26 16:42   ` Dmitry Torokhov
2017-01-31 20:02   ` Applied "spi: mediatek: Only do dma for 4-byte aligned buffers" to the spi tree Mark Brown
2017-01-28 22:17 ` [PATCH 1/2] spi: When no dma_chan map buffers with spi_master's parent Andy Shevchenko
2017-01-30 11:44   ` Robin Murphy
2017-01-31 20:02 ` Applied "spi: When no dma_chan map buffers with spi_master's parent" to the spi tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170126162154.124287-1-djkurtz@chromium.org \
    --to=djkurtz@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox