From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 4/4] arm64: Work around Falkor erratum 1009
Date: Fri, 27 Jan 2017 15:07:23 +0000 [thread overview]
Message-ID: <20170127150722.GN21144@arm.com> (raw)
In-Reply-To: <20170125155232.10277-4-cov@codeaurora.org>
On Wed, Jan 25, 2017 at 10:52:32AM -0500, Christopher Covington wrote:
> During a TLB invalidate sequence targeting the inner shareable domain,
> Falkor may prematurely complete the DSB before all loads and stores using
> the old translation are observed. Instruction fetches are not subject to
> the conditions of this erratum. If the original code sequence includes
> multiple TLB invalidate instructions followed by a single DSB, onle one of
> the TLB instructions needs to be repeated to work around this erratum.
> While the erratum only applies to cases in which the TLBI specifies the
> inner-shareable domain (*IS form of TLBI) and the DSB is ISH form or
> stronger (OSH, SYS), this changes applies the workaround overabundantly--
> to local TLBI, DSB NSH sequences as well--for simplicity.
>
> Based on work by Shanker Donthineni <shankerd@codeaurora.org>
>
> Signed-off-by: Christopher Covington <cov@codeaurora.org>
> ---
> Documentation/arm64/silicon-errata.txt | 1 +
> arch/arm64/Kconfig | 10 ++++++++++
> arch/arm64/include/asm/cpucaps.h | 3 ++-
> arch/arm64/include/asm/tlbflush.h | 18 +++++++++++++++---
> arch/arm64/kernel/cpu_errata.c | 7 +++++++
> 5 files changed, 35 insertions(+), 4 deletions(-)
Thanks, this one looks good to me. It doesn't apply without the other
erratum workaround (due to conflicts), so I'll have to wait for the
discussion with Mark to each a conclusion before I can queue it.
One minor comment inline...
> diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
> index deab52374119..fc434f421c7b 100644
> --- a/arch/arm64/include/asm/tlbflush.h
> +++ b/arch/arm64/include/asm/tlbflush.h
> @@ -36,9 +36,21 @@
> * not. The macros handles invoking the asm with or without the
> * register argument as appropriate.
> */
> -#define __TLBI_0(op, arg) asm ("tlbi " #op)
> -#define __TLBI_1(op, arg) asm ("tlbi " #op ", %0" : : "r" (arg))
> -#define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg)
> +#define __TLBI_0(op, arg) asm volatile ("tlbi " #op "\n" \
> + ALTERNATIVE("nop\n nop", \
> + "dsb ish\n tlbi " #op, \
> + ARM64_WORKAROUND_REPEAT_TLBI, \
> + CONFIG_QCOM_FALKOR_ERRATUM_1009) \
> + : : )
> +
> +#define __TLBI_1(op, arg) asm volatile ("tlbi " #op ", %0\n" \
> + ALTERNATIVE("nop\n nop", \
> + "dsb ish\n tlbi " #op ", %0", \
> + ARM64_WORKAROUND_REPEAT_TLBI, \
> + CONFIG_QCOM_FALKOR_ERRATUM_1009) \
> + : : "r" (arg))
I don't think you need to make these volatile.
Will
prev parent reply other threads:[~2017-01-27 15:07 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-25 15:52 [PATCH v4 1/4] arm64: Define Falkor v1 CPU Christopher Covington
2017-01-25 15:52 ` [PATCH v4 2/4] arm64: Work around Falkor erratum 1003 Christopher Covington
2017-01-27 14:38 ` Mark Rutland
2017-01-27 14:43 ` Mark Rutland
2017-01-27 21:52 ` Christopher Covington
2017-01-30 10:56 ` Mark Rutland
2017-01-30 22:09 ` Christopher Covington
2017-01-27 19:18 ` Timur Tabi
2017-01-31 12:37 ` Mark Rutland
2017-01-31 17:48 ` Christopher Covington
2017-01-31 17:56 ` Marc Zyngier
2017-02-01 16:29 ` Christopher Covington
2017-02-01 16:33 ` Will Deacon
2017-02-01 17:36 ` Catalin Marinas
2017-02-01 17:41 ` Will Deacon
2017-02-01 17:49 ` Catalin Marinas
2017-02-01 17:51 ` Catalin Marinas
2017-02-01 17:59 ` Will Deacon
2017-02-01 18:22 ` Catalin Marinas
2017-02-01 18:34 ` Will Deacon
2017-02-01 18:38 ` Catalin Marinas
2017-02-08 0:36 ` Christopher Covington
2017-01-25 15:52 ` [PATCH v4 3/4] arm64: Use __tlbi() macros in KVM code Christopher Covington
2017-01-25 19:39 ` Christoffer Dall
2017-01-27 13:53 ` Will Deacon
2017-02-01 17:02 ` Punit Agrawal
2017-02-01 17:08 ` Will Deacon
2017-02-01 17:14 ` Punit Agrawal
2017-01-27 15:03 ` Will Deacon
2017-01-25 15:52 ` [PATCH v4 4/4] arm64: Work around Falkor erratum 1009 Christopher Covington
2017-01-27 15:07 ` Will Deacon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170127150722.GN21144@arm.com \
--to=will.deacon@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).