* [PATCHv5 0/5] Support for Marvell switches with integrated CPUs
@ 2017-01-29 23:20 Chris Packham
2017-01-29 23:20 ` [PATCH v6 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
` (4 more replies)
0 siblings, 5 replies; 12+ messages in thread
From: Chris Packham @ 2017-01-29 23:20 UTC (permalink / raw)
To: linux-arm-kernel
The 98DX3236, 98DX3336 and 98DX4251 are a set of switch ASICs with
integrated CPUs. They CPU block is common within these product lines and
(as far as I can tell/have been told) is based on the Armada XP. There
are a few differences due to the fact they have to squeeze the CPU into
the same package as the switch.
I've rebased this series against linux-pinctrl/devel to get access to
mvebu_mmio_mpp_ctrl. Everything else still applies cleanly to v4.10.0-rc5.
Chris Packham (4):
clk: mvebu: support for 98DX3236 SoC
Changes in v2:
- Update devicetree binding documentation for new compatible string
Changes in v3:
- Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
driver.
- Document mv98dx3236-corediv-clock binding
Changes in v4:
- None
Changes in v5:
- Collect ack from Rob
- Remove explicit initialisation of fields to 0 in mv98dx3236_coreclks
- Register dummy clock provider for marvell,mv98dx3236-cpu-clock
Changes in v6:
- None. Note this has already been applied to clk-net, I've just
included it for completeness.
arm: mvebu: support for SMP on 98DX3336 SoC
Changes in v2:
- Document new enable-method value
- Correct some references from 98DX4521 to 98DX3236
Changes in v3:
- Simplify mv98dx3236_resume_init by using of_io_request_and_map()
Changes in v4:
- integrate changes into platsmp.c instead of new init call
- avoid duplicated code.
- fix error return
- Collect ack from Rob
Changes in v5:
- Remove useless casts (thanks to Stephen Boyd)
Changes in v6:
- use a #define instead of a new structure for resume control registers.
arm: mvebu: Add device tree for 98DX3236 SoCs
Changes in v2:
- Update devicetree binding documentation to reflect that 98DX3336 and
984251 are supersets of 98DX3236.
- disable crypto block
- disable sdio for 98DX3236, enable for 98DX4251
Changes in v3:
- fix typo 4521 -> 4251
- document prestera bindings
- rework corediv-clock binding
- add label to packet processor node
- add new compatible string for DFX server
Changes in v4:
- Collect ack from Rob
Changes in v5:
- Fixup license text. Add labels to nodes.
Changes in v6:
- None
arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
Changes in v5:
- update license text
- use node labels
Changes in v6:
- Rename dts files to include 'armada-xp-' prefix
Kalyan Kinthada (1):
pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
Changes in v2:
- include sdio support for the 98DX4251
Changes in v3:
- None
Changes in v4:
- Correct some discrepencies between binding and driver.
- Collect acks from Rob and Sebastian
Changes in v5:
- Update bindings to reflect "gpo" pins
- Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
on changes queued in linux-pinctrl)
Changes in v6:
- None
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
.../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 ++
.../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
.../bindings/clock/mvebu-corediv-clock.txt | 1 +
.../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
.../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
.../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++
arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
arch/arm/boot/dts/armada-xp-db-dxbc2.dts | 151 ++++++++++++
arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 142 ++++++++++++
arch/arm/mach-mvebu/platsmp.c | 75 ++++++
drivers/clk/mvebu/armada-xp.c | 39 ++++
drivers/clk/mvebu/clk-corediv.c | 23 ++
drivers/clk/mvebu/clk-cpu.c | 8 +
drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 156 +++++++++++++
17 files changed, 1152 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-db-dxbc2.dts
create mode 100644 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
inter-diff to v5:
diff --git a/arch/arm/boot/dts/db-dxbc2.dts
b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
similarity index 100%
rename from arch/arm/boot/dts/db-dxbc2.dts
rename to arch/arm/boot/dts/armada-xp-db-dxbc2.dts
diff --git a/arch/arm/boot/dts/db-xc3-24g4xg.dts
b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
similarity index 100%
rename from arch/arm/boot/dts/db-xc3-24g4xg.dts
rename to arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
diff --git a/arch/arm/mach-mvebu/platsmp.c
b/arch/arm/mach-mvebu/platsmp.c
index a5b464497e1a..e62273aacb43 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -185,46 +185,35 @@ const struct smp_operations armada_xp_smp_ops
__initconst = {
CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
&armada_xp_smp_ops);
-struct resume_controller {
- u32 resume_control;
- u32 resume_boot_addr;
-};
-
-static const struct resume_controller mv98dx3336_resume_controller = {
- .resume_control = 0x08,
- .resume_boot_addr = 0x04,
-};
+#define MV98DX3236_CPU_RESUME_CTRL_REG 0x08
+#define MV98DX3236_CPU_RESUME_ADDR_REG 0x04
static const struct of_device_id of_mv98dx3236_resume_table[] = {
{
.compatible = "marvell,98dx3336-resume-ctrl",
- .data = &mv98dx3336_resume_controller,
},
{ /* end of list */ },
};
static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void
*boot_addr)
{
- const struct of_device_id *match;
struct device_node *np;
void __iomem *base;
- const struct resume_controller *rc;
-
WARN_ON(hw_cpu != 1);
- np = of_find_matching_node_and_match(NULL,
of_mv98dx3236_resume_table,
- &match);
+ np = of_find_matching_node(NULL, of_mv98dx3236_resume_table);
if (!np)
return -ENODEV;
base = of_io_request_and_map(np, 0, of_node_full_name(np));
- rc = match->data;
of_node_put(np);
if (IS_ERR(base))
return PTR_ERR(base);
- writel(0, base + rc->resume_control);
- writel(virt_to_phys(boot_addr), base + rc->resume_boot_addr);
+ writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG);
+ writel(virt_to_phys(boot_addr), base +
MV98DX3236_CPU_RESUME_ADDR_REG);
+
+ iounmap(base);
return 0;
}
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 1/5] clk: mvebu: support for 98DX3236 SoC
2017-01-29 23:20 [PATCHv5 0/5] Support for Marvell switches with integrated CPUs Chris Packham
@ 2017-01-29 23:20 ` Chris Packham
2017-01-29 23:20 ` [PATCH v6 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
` (3 subsequent siblings)
4 siblings, 0 replies; 12+ messages in thread
From: Chris Packham @ 2017-01-29 23:20 UTC (permalink / raw)
To: linux-arm-kernel
The 98DX3236, 98DX3336, 98DX4521 and variants have a different TCLK from
the Armada XP (200MHz vs 250MHz). The CPU core clock is fixed at 800MHz.
The clock gating options are a subset of those on the Armada XP.
The core clock divider is different to the Armada XP also.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
---
Notes:
Changes in v2:
- Update devicetree binding documentation for new compatible string
Changes in v3:
- Add 98dx3236 support to mvebu/clk-corediv.c rather than creating a new
driver.
- Document mv98dx3236-corediv-clock binding
Changes in v4:
- None
Changes in v5:
- Collect ack from Rob
- Remove explicit initialisation of fields to 0 in mv98dx3236_coreclks
- Register dummy clock provider for marvell,mv98dx3236-cpu-clock
Changes in v6:
- None. Note this has already been applied to clk-net, I've just
included it for completeness.
.../bindings/clock/mvebu-corediv-clock.txt | 1 +
.../devicetree/bindings/clock/mvebu-cpu-clock.txt | 1 +
drivers/clk/mvebu/armada-xp.c | 39 ++++++++++++++++++++++
drivers/clk/mvebu/clk-corediv.c | 23 +++++++++++++
drivers/clk/mvebu/clk-cpu.c | 8 +++++
5 files changed, 72 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
index 520562a7dc2a..c7b4e3a6b2c6 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt
@@ -7,6 +7,7 @@ Required properties:
- compatible : must be "marvell,armada-370-corediv-clock",
"marvell,armada-375-corediv-clock",
"marvell,armada-380-corediv-clock",
+ "marvell,mv98dx3236-corediv-clock",
- reg : must be the register address of Core Divider control register
- #clock-cells : from common clock binding; shall be set to 1
diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
index 99c214660bdc..7f28506eaee7 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
@@ -3,6 +3,7 @@ Device Tree Clock bindings for cpu clock of Marvell EBU platforms
Required properties:
- compatible : shall be one of the following:
"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
+ "marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC
- reg : Address and length of the clock complex register set, followed
by address and length of the PMU DFS registers
- #clock-cells : should be set to 1.
diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
index b3094315a3c0..890a863ae0d0 100644
--- a/drivers/clk/mvebu/armada-xp.c
+++ b/drivers/clk/mvebu/armada-xp.c
@@ -52,6 +52,12 @@ static u32 __init axp_get_tclk_freq(void __iomem *sar)
return 250000000;
}
+/* MV98DX3236 TCLK frequency is fixed to 200MHz */
+static u32 __init mv98dx3236_get_tclk_freq(void __iomem *sar)
+{
+ return 200000000;
+}
+
static const u32 axp_cpu_freqs[] __initconst = {
1000000000,
1066000000,
@@ -89,6 +95,12 @@ static u32 __init axp_get_cpu_freq(void __iomem *sar)
return cpu_freq;
}
+/* MV98DX3236 CLK frequency is fixed to 800MHz */
+static u32 __init mv98dx3236_get_cpu_freq(void __iomem *sar)
+{
+ return 800000000;
+}
+
static const int axp_nbclk_ratios[32][2] __initconst = {
{0, 1}, {1, 2}, {2, 2}, {2, 2},
{1, 2}, {1, 2}, {1, 1}, {2, 3},
@@ -158,6 +170,11 @@ static const struct coreclk_soc_desc axp_coreclks = {
.num_ratios = ARRAY_SIZE(axp_coreclk_ratios),
};
+static const struct coreclk_soc_desc mv98dx3236_coreclks = {
+ .get_tclk_freq = mv98dx3236_get_tclk_freq,
+ .get_cpu_freq = mv98dx3236_get_cpu_freq,
+};
+
/*
* Clock Gating Control
*/
@@ -195,6 +212,15 @@ static const struct clk_gating_soc_desc axp_gating_desc[] __initconst = {
{ }
};
+static const struct clk_gating_soc_desc mv98dx3236_gating_desc[] __initconst = {
+ { "ge1", NULL, 3, 0 },
+ { "ge0", NULL, 4, 0 },
+ { "pex00", NULL, 5, 0 },
+ { "sdio", NULL, 17, 0 },
+ { "xor0", NULL, 22, 0 },
+ { }
+};
+
static void __init axp_clk_init(struct device_node *np)
{
struct device_node *cgnp =
@@ -206,3 +232,16 @@ static void __init axp_clk_init(struct device_node *np)
mvebu_clk_gating_setup(cgnp, axp_gating_desc);
}
CLK_OF_DECLARE(axp_clk, "marvell,armada-xp-core-clock", axp_clk_init);
+
+static void __init mv98dx3236_clk_init(struct device_node *np)
+{
+ struct device_node *cgnp =
+ of_find_compatible_node(NULL, NULL, "marvell,armada-xp-gating-clock");
+
+ mvebu_coreclk_setup(np, &mv98dx3236_coreclks);
+
+ if (cgnp)
+ mvebu_clk_gating_setup(cgnp, mv98dx3236_gating_desc);
+}
+CLK_OF_DECLARE(mv98dx3236_clk, "marvell,mv98dx3236-core-clock",
+ mv98dx3236_clk_init);
diff --git a/drivers/clk/mvebu/clk-corediv.c b/drivers/clk/mvebu/clk-corediv.c
index d1e5863d3375..8491979f4096 100644
--- a/drivers/clk/mvebu/clk-corediv.c
+++ b/drivers/clk/mvebu/clk-corediv.c
@@ -71,6 +71,10 @@ static const struct clk_corediv_desc mvebu_corediv_desc[] = {
{ .mask = 0x3f, .offset = 8, .fieldbit = 1 }, /* NAND clock */
};
+static const struct clk_corediv_desc mv98dx3236_corediv_desc[] = {
+ { .mask = 0x0f, .offset = 6, .fieldbit = 26 }, /* NAND clock */
+};
+
#define to_corediv_clk(p) container_of(p, struct clk_corediv, hw)
static int clk_corediv_is_enabled(struct clk_hw *hwclk)
@@ -232,6 +236,18 @@ static const struct clk_corediv_soc_desc armada375_corediv_soc = {
.ratio_offset = 0x4,
};
+static const struct clk_corediv_soc_desc mv98dx3236_corediv_soc = {
+ .descs = mv98dx3236_corediv_desc,
+ .ndescs = ARRAY_SIZE(mv98dx3236_corediv_desc),
+ .ops = {
+ .recalc_rate = clk_corediv_recalc_rate,
+ .round_rate = clk_corediv_round_rate,
+ .set_rate = clk_corediv_set_rate,
+ },
+ .ratio_reload = BIT(10),
+ .ratio_offset = 0x8,
+};
+
static void __init
mvebu_corediv_clk_init(struct device_node *node,
const struct clk_corediv_soc_desc *soc_desc)
@@ -313,3 +329,10 @@ static void __init armada380_corediv_clk_init(struct device_node *node)
}
CLK_OF_DECLARE(armada380_corediv_clk, "marvell,armada-380-corediv-clock",
armada380_corediv_clk_init);
+
+static void __init mv98dx3236_corediv_clk_init(struct device_node *node)
+{
+ return mvebu_corediv_clk_init(node, &mv98dx3236_corediv_soc);
+}
+CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
+ mv98dx3236_corediv_clk_init);
diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
index 5837eb8a212f..044892b6534d 100644
--- a/drivers/clk/mvebu/clk-cpu.c
+++ b/drivers/clk/mvebu/clk-cpu.c
@@ -245,3 +245,11 @@ static void __init of_cpu_clk_setup(struct device_node *node)
CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
of_cpu_clk_setup);
+
+static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
+{
+ of_clk_add_provider(node, of_clk_src_simple_get, NULL);
+}
+
+CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
+ of_mv98dx3236_cpu_clk_setup);
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 2/5] arm: mvebu: support for SMP on 98DX3336 SoC
2017-01-29 23:20 [PATCHv5 0/5] Support for Marvell switches with integrated CPUs Chris Packham
2017-01-29 23:20 ` [PATCH v6 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
@ 2017-01-29 23:20 ` Chris Packham
2017-01-30 14:26 ` Gregory CLEMENT
2017-01-29 23:20 ` [PATCH v6 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
` (2 subsequent siblings)
4 siblings, 1 reply; 12+ messages in thread
From: Chris Packham @ 2017-01-29 23:20 UTC (permalink / raw)
To: linux-arm-kernel
Compared to the armada-xp the 98DX3336 uses different registers to set
the boot address for the secondary CPU so a new enable-method is needed.
This will only work if the machine definition doesn't define an overall
smp_ops because there is not currently a way of overriding this from the
device tree if it is set in the machine definition.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
---
Notes:
Changes in v2:
- Document new enable-method value
- Correct some references from 98DX4521 to 98DX3236
Changes in v3:
- Simplify mv98dx3236_resume_init by using of_io_request_and_map()
Changes in v4:
- integrate changes into platsmp.c instead of new init call
- avoid duplicated code.
- fix error return
- Collect ack from Rob
Changes in v5:
- Remove useless casts (thanks to Stephen Boyd)
Changes in v6:
- use a #define instead of a new structure for resume control registers.
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
.../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 +++++
arch/arm/mach-mvebu/platsmp.c | 75 ++++++++++++++++++++++
3 files changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index a1bcfeed5f24..3c2fd72d0bf9 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -202,6 +202,7 @@ nodes to be present and contain the properties described below.
"marvell,armada-380-smp"
"marvell,armada-390-smp"
"marvell,armada-xp-smp"
+ "marvell,98dx3236-smp"
"mediatek,mt6589-smp"
"mediatek,mt81xx-tz-smp"
"qcom,gcc-msm8660"
diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
new file mode 100644
index 000000000000..26eb9d3aa630
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
@@ -0,0 +1,16 @@
+Resume Control
+--------------
+Available on Marvell SOCs: 98DX3336 and 98DX4251
+
+Required properties:
+
+- compatible: must be "marvell,98dx3336-resume-ctrl"
+
+- reg: Should contain resume control registers location and length
+
+Example:
+
+resume at 20980 {
+ compatible = "marvell,98dx3336-resume-ctrl";
+ reg = <0x20980 0x10>;
+};
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index 46c742d3bd41..e62273aacb43 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -184,3 +184,78 @@ const struct smp_operations armada_xp_smp_ops __initconst = {
CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
&armada_xp_smp_ops);
+
+#define MV98DX3236_CPU_RESUME_CTRL_REG 0x08
+#define MV98DX3236_CPU_RESUME_ADDR_REG 0x04
+
+static const struct of_device_id of_mv98dx3236_resume_table[] = {
+ {
+ .compatible = "marvell,98dx3336-resume-ctrl",
+ },
+ { /* end of list */ },
+};
+
+static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
+{
+ struct device_node *np;
+ void __iomem *base;
+ WARN_ON(hw_cpu != 1);
+
+ np = of_find_matching_node(NULL, of_mv98dx3236_resume_table);
+ if (!np)
+ return -ENODEV;
+
+ base = of_io_request_and_map(np, 0, of_node_full_name(np));
+ of_node_put(np);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG);
+ writel(virt_to_phys(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG);
+
+ iounmap(base);
+
+ return 0;
+}
+
+static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ int ret, hw_cpu;
+
+ hw_cpu = cpu_logical_map(cpu);
+ set_secondary_cpu_clock(hw_cpu);
+ mv98dx3236_resume_set_cpu_boot_addr(hw_cpu,
+ armada_xp_secondary_startup);
+
+ /*
+ * This is needed to wake up CPUs in the offline state after
+ * using CPU hotplug.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ /*
+ * This is needed to take secondary CPUs out of reset on the
+ * initial boot.
+ */
+ ret = mvebu_cpu_reset_deassert(hw_cpu);
+ if (ret) {
+ pr_warn("unable to boot CPU: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct smp_operations mv98dx3236_smp_ops __initconst = {
+ .smp_init_cpus = armada_xp_smp_init_cpus,
+ .smp_prepare_cpus = armada_xp_smp_prepare_cpus,
+ .smp_boot_secondary = mv98dx3236_boot_secondary,
+ .smp_secondary_init = armada_xp_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = armada_xp_cpu_die,
+ .cpu_kill = armada_xp_cpu_kill,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp",
+ &mv98dx3236_smp_ops);
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
2017-01-29 23:20 [PATCHv5 0/5] Support for Marvell switches with integrated CPUs Chris Packham
2017-01-29 23:20 ` [PATCH v6 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
2017-01-29 23:20 ` [PATCH v6 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
@ 2017-01-29 23:20 ` Chris Packham
2017-01-30 13:58 ` Linus Walleij
2017-01-29 23:20 ` [PATCH v6 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
2017-01-29 23:20 ` [PATCH v6 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
4 siblings, 1 reply; 12+ messages in thread
From: Chris Packham @ 2017-01-29 23:20 UTC (permalink / raw)
To: linux-arm-kernel
From: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
This pinctrl driver supports the 98DX3236, 98DX3336 and 98DX4251 SoCs
from Marvell.
Signed-off-by: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Notes:
Changes in v2:
- include sdio support for the 98DX4251
Changes in v3:
- None
Changes in v4:
- Correct some discrepencies between binding and driver.
- Collect acks from Rob and Sebastian
Changes in v5:
- Update bindings to reflect "gpo" pins
- Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
on changes queued in linux-pinctrl)
Changes in v6:
- None
.../pinctrl/marvell,armada-98dx3236-pinctrl.txt | 46 ++++++
drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 156 +++++++++++++++++++++
2 files changed, 202 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
new file mode 100644
index 000000000000..97aef67ee769
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
@@ -0,0 +1,46 @@
+* Marvell 98dx3236 pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage
+
+Required properties:
+- compatible: "marvell,98dx3236-pinctrl" or "marvell,98dx4251-pinctrl"
+- reg: register specifier of MPP registers
+
+This driver supports all 98dx3236, 98dx3336 and 98dx4251 variants
+
+name pins functions
+================================================================================
+mpp0 0 gpo, spi0(mosi), dev(ad8)
+mpp1 1 gpio, spi0(miso), dev(ad9)
+mpp2 2 gpo, spi0(sck), dev(ad10)
+mpp3 3 gpio, spi0(cs0), dev(ad11)
+mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0)
+mpp5 5 gpio, pex(rsto), sd0(cmd), dev(bootcs)
+mpp6 6 gpo, sd0(clk), dev(a2)
+mpp7 7 gpio, sd0(d0), dev(ale0)
+mpp8 8 gpio, sd0(d1), dev(ale1)
+mpp9 9 gpio, sd0(d2), dev(ready0)
+mpp10 10 gpio, sd0(d3), dev(ad12)
+mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13)
+mpp12 12 gpo, uart1(txd), uart0(rts), dev(ad14)
+mpp13 13 gpio, intr(out), dev(ad15)
+mpp14 14 gpio, i2c0(sck)
+mpp15 15 gpio, i2c0(sda)
+mpp16 16 gpo, dev(oe)
+mpp17 17 gpo, dev(clkout)
+mpp18 18 gpio, uart1(txd)
+mpp19 19 gpio, uart1(rxd), dev(rb)
+mpp20 20 gpo, dev(we0)
+mpp21 21 gpo, dev(ad0)
+mpp22 22 gpo, dev(ad1)
+mpp23 23 gpo, dev(ad2)
+mpp24 24 gpo, dev(ad3)
+mpp25 25 gpo, dev(ad4)
+mpp26 26 gpo, dev(ad5)
+mpp27 27 gpo, dev(ad6)
+mpp28 28 gpo, dev(ad7)
+mpp29 29 gpo, dev(a0)
+mpp30 30 gpo, dev(a1)
+mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1)
+mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1)
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
index 63e1bd506983..61cbc138703e 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
@@ -38,6 +38,10 @@ enum armada_xp_variant {
V_MV78460 = BIT(2),
V_MV78230_PLUS = (V_MV78230 | V_MV78260 | V_MV78460),
V_MV78260_PLUS = (V_MV78260 | V_MV78460),
+ V_98DX3236 = BIT(3),
+ V_98DX3336 = BIT(4),
+ V_98DX4251 = BIT(5),
+ V_98DX3236_PLUS = (V_98DX3236 | V_98DX3336 | V_98DX4251),
};
static struct mvebu_mpp_mode armada_xp_mpp_modes[] = {
@@ -349,6 +353,131 @@ static struct mvebu_mpp_mode armada_xp_mpp_modes[] = {
MPP_VAR_FUNCTION(0x1, "dev", "ad31", V_MV78260_PLUS)),
};
+static struct mvebu_mpp_mode mv98dx3236_mpp_modes[] = {
+ MPP_MODE(0,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "spi0", "mosi", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad8", V_98DX3236_PLUS)),
+ MPP_MODE(1,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "spi0", "miso", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad9", V_98DX3236_PLUS)),
+ MPP_MODE(2,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "spi0", "sck", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad10", V_98DX3236_PLUS)),
+ MPP_MODE(3,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "spi0", "cs0", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad11", V_98DX3236_PLUS)),
+ MPP_MODE(4,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "spi0", "cs1", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "smi", "mdc", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "cs0", V_98DX3236_PLUS)),
+ MPP_MODE(5,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "pex", "rsto", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "sd0", "cmd", V_98DX4251),
+ MPP_VAR_FUNCTION(0x4, "dev", "bootcs", V_98DX3236_PLUS)),
+ MPP_MODE(6,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "sd0", "clk", V_98DX4251),
+ MPP_VAR_FUNCTION(0x4, "dev", "a2", V_98DX3236_PLUS)),
+ MPP_MODE(7,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "sd0", "d0", V_98DX4251),
+ MPP_VAR_FUNCTION(0x4, "dev", "ale0", V_98DX3236_PLUS)),
+ MPP_MODE(8,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "sd0", "d1", V_98DX4251),
+ MPP_VAR_FUNCTION(0x4, "dev", "ale1", V_98DX3236_PLUS)),
+ MPP_MODE(9,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "sd0", "d2", V_98DX4251),
+ MPP_VAR_FUNCTION(0x4, "dev", "ready0", V_98DX3236_PLUS)),
+ MPP_MODE(10,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "sd0", "d3", V_98DX4251),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad12", V_98DX3236_PLUS)),
+ MPP_MODE(11,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart1", "rxd", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "uart0", "cts", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad13", V_98DX3236_PLUS)),
+ MPP_MODE(12,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x2, "uart1", "txd", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "uart0", "rts", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad14", V_98DX3236_PLUS)),
+ MPP_MODE(13,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "intr", "out", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "ad15", V_98DX3236_PLUS)),
+ MPP_MODE(14,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "i2c0", "sck", V_98DX3236_PLUS)),
+ MPP_MODE(15,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "i2c0", "sda", V_98DX3236_PLUS)),
+ MPP_MODE(16,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "oe", V_98DX3236_PLUS)),
+ MPP_MODE(17,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "clkout", V_98DX3236_PLUS)),
+ MPP_MODE(18,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "uart1", "txd", V_98DX3236_PLUS)),
+ MPP_MODE(19,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "uart1", "rxd", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "rb", V_98DX3236_PLUS)),
+ MPP_MODE(20,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "we0", V_98DX3236_PLUS)),
+ MPP_MODE(21,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad0", V_98DX3236_PLUS)),
+ MPP_MODE(22,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad1", V_98DX3236_PLUS)),
+ MPP_MODE(23,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad2", V_98DX3236_PLUS)),
+ MPP_MODE(24,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad3", V_98DX3236_PLUS)),
+ MPP_MODE(25,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad4", V_98DX3236_PLUS)),
+ MPP_MODE(26,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad5", V_98DX3236_PLUS)),
+ MPP_MODE(27,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad6", V_98DX3236_PLUS)),
+ MPP_MODE(28,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "ad7", V_98DX3236_PLUS)),
+ MPP_MODE(29,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "a0", V_98DX3236_PLUS)),
+ MPP_MODE(30,
+ MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "dev", "a1", V_98DX3236_PLUS)),
+ MPP_MODE(31,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "slv_smi", "mdc", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "smi", "mdc", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "we1", V_98DX3236_PLUS)),
+ MPP_MODE(32,
+ MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x1, "slv_smi", "mdio", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x3, "smi", "mdio", V_98DX3236_PLUS),
+ MPP_VAR_FUNCTION(0x4, "dev", "cs1", V_98DX3236_PLUS)),
+};
+
static struct mvebu_pinctrl_soc_info armada_xp_pinctrl_info;
static const struct of_device_id armada_xp_pinctrl_of_match[] = {
@@ -364,6 +493,14 @@ static const struct of_device_id armada_xp_pinctrl_of_match[] = {
.compatible = "marvell,mv78460-pinctrl",
.data = (void *) V_MV78460,
},
+ {
+ .compatible = "marvell,98dx3236-pinctrl",
+ .data = (void *) V_98DX3236,
+ },
+ {
+ .compatible = "marvell,98dx4251-pinctrl",
+ .data = (void *) V_98DX4251,
+ },
{ },
};
@@ -396,6 +533,14 @@ static struct pinctrl_gpio_range mv78460_mpp_gpio_ranges[] = {
MPP_GPIO_RANGE(2, 64, 64, 3),
};
+static struct mvebu_mpp_ctrl mv98dx3236_mpp_controls[] = {
+ MPP_FUNC_CTRL(0, 32, NULL, mvebu_mmio_mpp_ctrl),
+};
+
+static struct pinctrl_gpio_range mv98dx3236_mpp_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 32),
+};
+
static int armada_xp_pinctrl_suspend(struct platform_device *pdev,
pm_message_t state)
{
@@ -471,6 +616,17 @@ static int armada_xp_pinctrl_probe(struct platform_device *pdev)
soc->gpioranges = mv78460_mpp_gpio_ranges;
soc->ngpioranges = ARRAY_SIZE(mv78460_mpp_gpio_ranges);
break;
+ case V_98DX3236:
+ case V_98DX3336:
+ case V_98DX4251:
+ /* fall-through */
+ soc->controls = mv98dx3236_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(mv98dx3236_mpp_controls);
+ soc->modes = mv98dx3236_mpp_modes;
+ soc->nmodes = mv98dx3236_mpp_controls[0].npins;
+ soc->gpioranges = mv98dx3236_mpp_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(mv98dx3236_mpp_gpio_ranges);
+ break;
}
nregs = DIV_ROUND_UP(soc->nmodes, MVEBU_MPPS_PER_REG);
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs
2017-01-29 23:20 [PATCHv5 0/5] Support for Marvell switches with integrated CPUs Chris Packham
` (2 preceding siblings ...)
2017-01-29 23:20 ` [PATCH v6 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
@ 2017-01-29 23:20 ` Chris Packham
2017-01-30 14:29 ` Gregory CLEMENT
2017-01-29 23:20 ` [PATCH v6 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
4 siblings, 1 reply; 12+ messages in thread
From: Chris Packham @ 2017-01-29 23:20 UTC (permalink / raw)
To: linux-arm-kernel
The Marvell 98DX3236, 98DX3336, 98DX4521 and variants are switch ASICs
with integrated CPUs. They are similar to the Armada XP SoCs but have
different I/O interfaces.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
---
Notes:
Changes in v2:
- Update devicetree binding documentation to reflect that 98DX3336 and
984251 are supersets of 98DX3236.
- disable crypto block
- disable sdio for 98DX3236, enable for 98DX4251
Changes in v3:
- fix typo 4521 -> 4251
- document prestera bindings
- rework corediv-clock binding
- add label to packet processor node
- add new compatible string for DFX server
Changes in v4:
- Collect ack from Rob
Changes in v5:
- Fixup license text. Add labels to nodes.
Changes in v6:
- None
.../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
.../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
5 files changed, 493 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
new file mode 100644
index 000000000000..64e8c73fc5ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
@@ -0,0 +1,23 @@
+Marvell 98DX3236, 98DX3336 and 98DX4251 Platforms Device Tree Bindings
+----------------------------------------------------------------------
+
+Boards with a SoC of the Marvell 98DX3236, 98DX3336 and 98DX4251 families
+shall have the following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp-98dx3236"
+
+In addition, boards using the Marvell 98DX3336 SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp-98dx3336"
+
+In addition, boards using the Marvell 98DX4251 SoC shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armadaxp-98dx4251"
diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
new file mode 100644
index 000000000000..5fbab29718e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -0,0 +1,50 @@
+Marvell Prestera Switch Chip bindings
+-------------------------------------
+
+Required properties:
+- compatible: one of the following
+ "marvell,prestera-98dx3236",
+ "marvell,prestera-98dx3336",
+ "marvell,prestera-98dx4251",
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device
+
+Optional properties:
+- dfx: phandle reference to the "DFX Server" node
+
+Example:
+
+switch {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
+
+ packet-processor at 0 {
+ compatible = "marvell,prestera-98dx3236";
+ reg = <0 0x4000000>;
+ interrupts = <33>, <34>, <35>;
+ dfx = <&dfx>;
+ };
+};
+
+DFX Server bindings
+-------------------
+
+Required properties:
+- compatible: must be "marvell,dfx-server"
+- reg: address and length of the register set for the device.
+
+Example:
+
+dfx-registers {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+ dfx: dfx at 0 {
+ compatible = "marvell,dfx-server";
+ reg = <0 0x100000>;
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
new file mode 100644
index 000000000000..9461128fae24
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -0,0 +1,254 @@
+/*
+ * Device Tree Include file for Marvell 98dx3236 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+ model = "Marvell 98DX3236 SoC";
+ compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "marvell,98dx3236-smp";
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-v7";
+ reg = <0>;
+ clocks = <&cpuclk 0>;
+ clock-latency = <1000000>;
+ };
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+ MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
+ MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+ /*
+ * 98DX3236 has 1 x1 PCIe unit Gen2.0
+ */
+ pciec: pcie-controller at 82000000 {
+ compatible = "marvell,armada-xp-pcie";
+ status = "disabled";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ msi-parent = <&mpic>;
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
+
+ pcie1: pcie at 1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ clocks = <&gateclk 5>;
+ status = "disabled";
+ };
+ };
+
+ internal-regs {
+ coreclk: mvebu-sar at 18230 {
+ compatible = "marvell,mv98dx3236-core-clock";
+ };
+
+ cpuclk: clock-complex at 18700 {
+ compatible = "marvell,mv98dx3236-cpu-clock";
+ };
+
+ corediv-clock at 18740 {
+ status = "disabled";
+ };
+
+ xor at 60900 {
+ status = "disabled";
+ };
+
+ crypto at 90000 {
+ status = "disabled";
+ };
+
+ xor at f0900 {
+ status = "disabled";
+ };
+
+ xor at f0800 {
+ compatible = "marvell,orion-xor";
+ reg = <0xf0800 0x100
+ 0xf0a00 0x100>;
+ clocks = <&gateclk 22>;
+ status = "okay";
+
+ xor10 {
+ interrupts = <51>;
+ dmacap,memcpy;
+ dmacap,xor;
+ };
+ xor11 {
+ interrupts = <52>;
+ dmacap,memcpy;
+ dmacap,xor;
+ dmacap,memset;
+ };
+ };
+
+ gpio0: gpio at 18100 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18100 0x40>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <82>, <83>, <84>, <85>;
+ };
+
+ /* does not exist */
+ gpio1: gpio at 18140 {
+ compatible = "marvell,orion-gpio";
+ reg = <0x18140 0x40>;
+ status = "disabled";
+ };
+
+ gpio2: gpio at 18180 { /* rework some properties */
+ compatible = "marvell,orion-gpio";
+ reg = <0x18180 0x40>;
+ ngpios = <1>; /* only gpio #32 */
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <87>;
+ };
+
+ nand: nand at d0000 {
+ clocks = <&dfx_coredivclk 0>;
+ };
+ };
+
+ dfxr: dfx-registers at ac000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+ dfx_coredivclk: corediv-clock at f8268 {
+ compatible = "marvell,mv98dx3236-corediv-clock";
+ reg = <0xf8268 0xc>;
+ #clock-cells = <1>;
+ clocks = <&mainpll>;
+ clock-output-names = "nand";
+ };
+
+ dfx: dfx at 0 {
+ compatible = "marvell,dfx-server";
+ reg = <0 0x100000>;
+ };
+ };
+
+ switch: switch at a8000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
+
+ pp0: packet-processor at 0 {
+ compatible = "marvell,prestera-98dx3236";
+ reg = <0 0x4000000>;
+ interrupts = <33>, <34>, <35>;
+ dfx = <&dfx>;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ compatible = "marvell,98dx3236-pinctrl";
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp0", "mpp1",
+ "mpp2", "mpp3";
+ marvell,function = "spi0";
+ };
+};
+
+&sdio {
+ status = "disabled";
+};
+
+&crypto_sram0 {
+ status = "disabled";
+};
+
+&crypto_sram1 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
new file mode 100644
index 000000000000..e1580afdc260
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
@@ -0,0 +1,76 @@
+/*
+ * Device Tree Include file for Marvell 98dx3336 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+ model = "Marvell 98DX3336 SoC";
+ compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ cpus {
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-v7";
+ reg = <1>;
+ clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
+ };
+ };
+
+ soc {
+ internal-regs {
+ resume at 20980 {
+ compatible = "marvell,98dx3336-resume-ctrl";
+ reg = <0x20980 0x10>;
+ };
+ };
+ };
+};
+
+&pp0 {
+ compatible = "marvell,prestera-98dx3336";
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
new file mode 100644
index 000000000000..4b0533a4ccb7
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
@@ -0,0 +1,90 @@
+/*
+ * Device Tree Include file for Marvell 98dx4521 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the 98dx4521 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+ model = "Marvell 98DX4251 SoC";
+ compatible = "marvell,armadaxp-98dx4521", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ cpus {
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "marvell,sheeva-v7";
+ reg = <1>;
+ clocks = <&cpuclk 1>;
+ clock-latency = <1000000>;
+ };
+ };
+
+ soc {
+ internal-regs {
+ resume at 20980 {
+ compatible = "marvell,98dx3336-resume-ctrl";
+ reg = <0x20980 0x10>;
+ };
+ };
+ };
+};
+
+&sdio {
+ status = "okay";
+};
+
+&pinctrl {
+ compatible = "marvell,98dx4251-pinctrl";
+
+ sdio_pins: sdio-pins {
+ marvell,pins = "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10";
+ marvell,function = "sd0";
+ };
+};
+
+&pp0 {
+ compatible = "marvell,prestera-98dx4251";
+};
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
2017-01-29 23:20 [PATCHv5 0/5] Support for Marvell switches with integrated CPUs Chris Packham
` (3 preceding siblings ...)
2017-01-29 23:20 ` [PATCH v6 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
@ 2017-01-29 23:20 ` Chris Packham
2017-01-30 14:29 ` Gregory CLEMENT
4 siblings, 1 reply; 12+ messages in thread
From: Chris Packham @ 2017-01-29 23:20 UTC (permalink / raw)
To: linux-arm-kernel
These boards are Marvell's evaluation boards for the 98DX4251 and
98DX3336 SoCs.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
Notes:
Changes in v5:
- update license text
- use node labels
Changes in v6:
- Rename dts files to include 'armada-xp-' prefix
arch/arm/boot/dts/armada-xp-db-dxbc2.dts | 151 ++++++++++++++++++++++++++
arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 142 ++++++++++++++++++++++++
2 files changed, 293 insertions(+)
create mode 100644 arch/arm/boot/dts/armada-xp-db-dxbc2.dts
create mode 100644 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
new file mode 100644
index 000000000000..a8130805074e
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -0,0 +1,151 @@
+/*
+ * Device Tree file for DB-DXBC2 board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx4251.dtsi"
+
+/ {
+ model = "Marvell Bobcat2 Evaluation Board";
+ compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+ };
+
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <16>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+};
+
+&sdio {
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ /* No CD or WP GPIOs */
+ broken-cd;
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p64";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+
+ partition at u-boot {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ };
+ partition at u-boot-env {
+ reg = <0x00100000 0x00040000>;
+ label = "u-boot-env";
+ };
+ partition at unused {
+ reg = <0x00140000 0x00ec0000>;
+ label = "unused";
+ };
+
+ };
+};
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
new file mode 100644
index 000000000000..4e07cb6ed800
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -0,0 +1,142 @@
+/*
+ * Device Tree file for DB-XC3-24G4XG board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3336.dtsi"
+
+/ {
+ model = "DB-XC3-24G4XG";
+ compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <16>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+ num-cs = <1>;
+ marvell,nand-keep-config;
+ marvell,nand-enable-arbiter;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+};
+
+&spi0 {
+ status = "okay";
+
+ spi-flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p64";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+
+ partition at u-boot {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ };
+ partition at u-boot-env {
+ reg = <0x00100000 0x00040000>;
+ label = "u-boot-env";
+ };
+ partition at unused {
+ reg = <0x00140000 0x00ec0000>;
+ label = "unused";
+ };
+
+ };
+};
--
2.11.0.24.ge6920cf
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC
2017-01-29 23:20 ` [PATCH v6 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
@ 2017-01-30 13:58 ` Linus Walleij
0 siblings, 0 replies; 12+ messages in thread
From: Linus Walleij @ 2017-01-30 13:58 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jan 30, 2017 at 12:20 AM, Chris Packham
<chris.packham@alliedtelesis.co.nz> wrote:
> From: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
>
> This pinctrl driver supports the 98DX3236, 98DX3336 and 98DX4251 SoCs
> from Marvell.
>
> Signed-off-by: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Acked-by: Rob Herring <robh@kernel.org>
> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> ---
>
> Notes:
> Changes in v2:
> - include sdio support for the 98DX4251
> Changes in v3:
> - None
> Changes in v4:
> - Correct some discrepencies between binding and driver.
> - Collect acks from Rob and Sebastian
> Changes in v5:
> - Update bindings to reflect "gpo" pins
> - Use mvebu_mmio_mpp_ctrl instead of armada_xp_mpp_ctrl (note this is reliant
> on changes queued in linux-pinctrl)
> Changes in v6:
> - None
This patch was applied to an immutable branch and then merged into the
pinctrl devel tree. The immutable branch is here:
https://git.kernel.org/cgit/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=ib-mvebu-98dx3236
Do as you please: if you want other trees (ARM SoC) to pull this in or
not.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v6 2/5] arm: mvebu: support for SMP on 98DX3336 SoC
2017-01-29 23:20 ` [PATCH v6 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
@ 2017-01-30 14:26 ` Gregory CLEMENT
0 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2017-01-30 14:26 UTC (permalink / raw)
To: linux-arm-kernel
Hi Chris,
On lun., janv. 30 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
> Compared to the armada-xp the 98DX3336 uses different registers to set
> the boot address for the secondary CPU so a new enable-method is needed.
> This will only work if the machine definition doesn't define an overall
> smp_ops because there is not currently a way of overriding this from the
> device tree if it is set in the machine definition.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Acked-by: Rob Herring <robh@kernel.org>
Applied on mvebu/soc
Thanks,
Gregory
> ---
>
> Notes:
> Changes in v2:
> - Document new enable-method value
> - Correct some references from 98DX4521 to 98DX3236
> Changes in v3:
> - Simplify mv98dx3236_resume_init by using of_io_request_and_map()
> Changes in v4:
> - integrate changes into platsmp.c instead of new init call
> - avoid duplicated code.
> - fix error return
> - Collect ack from Rob
> Changes in v5:
> - Remove useless casts (thanks to Stephen Boyd)
> Changes in v6:
> - use a #define instead of a new structure for resume control registers.
>
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> .../bindings/arm/marvell/98dx3236-resume-ctrl.txt | 16 +++++
> arch/arm/mach-mvebu/platsmp.c | 75 ++++++++++++++++++++++
> 3 files changed, 92 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
> index a1bcfeed5f24..3c2fd72d0bf9 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.txt
> +++ b/Documentation/devicetree/bindings/arm/cpus.txt
> @@ -202,6 +202,7 @@ nodes to be present and contain the properties described below.
> "marvell,armada-380-smp"
> "marvell,armada-390-smp"
> "marvell,armada-xp-smp"
> + "marvell,98dx3236-smp"
> "mediatek,mt6589-smp"
> "mediatek,mt81xx-tz-smp"
> "qcom,gcc-msm8660"
> diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> new file mode 100644
> index 000000000000..26eb9d3aa630
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt
> @@ -0,0 +1,16 @@
> +Resume Control
> +--------------
> +Available on Marvell SOCs: 98DX3336 and 98DX4251
> +
> +Required properties:
> +
> +- compatible: must be "marvell,98dx3336-resume-ctrl"
> +
> +- reg: Should contain resume control registers location and length
> +
> +Example:
> +
> +resume at 20980 {
> + compatible = "marvell,98dx3336-resume-ctrl";
> + reg = <0x20980 0x10>;
> +};
> diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
> index 46c742d3bd41..e62273aacb43 100644
> --- a/arch/arm/mach-mvebu/platsmp.c
> +++ b/arch/arm/mach-mvebu/platsmp.c
> @@ -184,3 +184,78 @@ const struct smp_operations armada_xp_smp_ops __initconst = {
>
> CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
> &armada_xp_smp_ops);
> +
> +#define MV98DX3236_CPU_RESUME_CTRL_REG 0x08
> +#define MV98DX3236_CPU_RESUME_ADDR_REG 0x04
> +
> +static const struct of_device_id of_mv98dx3236_resume_table[] = {
> + {
> + .compatible = "marvell,98dx3336-resume-ctrl",
> + },
> + { /* end of list */ },
> +};
> +
> +static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
> +{
> + struct device_node *np;
> + void __iomem *base;
> + WARN_ON(hw_cpu != 1);
> +
> + np = of_find_matching_node(NULL, of_mv98dx3236_resume_table);
> + if (!np)
> + return -ENODEV;
> +
> + base = of_io_request_and_map(np, 0, of_node_full_name(np));
> + of_node_put(np);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG);
> + writel(virt_to_phys(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG);
> +
> + iounmap(base);
> +
> + return 0;
> +}
> +
> +static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle)
> +{
> + int ret, hw_cpu;
> +
> + hw_cpu = cpu_logical_map(cpu);
> + set_secondary_cpu_clock(hw_cpu);
> + mv98dx3236_resume_set_cpu_boot_addr(hw_cpu,
> + armada_xp_secondary_startup);
> +
> + /*
> + * This is needed to wake up CPUs in the offline state after
> + * using CPU hotplug.
> + */
> + arch_send_wakeup_ipi_mask(cpumask_of(cpu));
> +
> + /*
> + * This is needed to take secondary CPUs out of reset on the
> + * initial boot.
> + */
> + ret = mvebu_cpu_reset_deassert(hw_cpu);
> + if (ret) {
> + pr_warn("unable to boot CPU: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct smp_operations mv98dx3236_smp_ops __initconst = {
> + .smp_init_cpus = armada_xp_smp_init_cpus,
> + .smp_prepare_cpus = armada_xp_smp_prepare_cpus,
> + .smp_boot_secondary = mv98dx3236_boot_secondary,
> + .smp_secondary_init = armada_xp_secondary_init,
> +#ifdef CONFIG_HOTPLUG_CPU
> + .cpu_die = armada_xp_cpu_die,
> + .cpu_kill = armada_xp_cpu_kill,
> +#endif
> +};
> +
> +CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp",
> + &mv98dx3236_smp_ops);
> --
> 2.11.0.24.ge6920cf
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v6 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs
2017-01-29 23:20 ` [PATCH v6 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
@ 2017-01-30 14:29 ` Gregory CLEMENT
0 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2017-01-30 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Hi Chris,
On lun., janv. 30 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
> The Marvell 98DX3236, 98DX3336, 98DX4521 and variants are switch ASICs
> with integrated CPUs. They are similar to the Armada XP SoCs but have
> different I/O interfaces.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Acked-by: Rob Herring <robh@kernel.org>
Applied on mvebu/dt
Thanks,
Gregory
> ---
>
> Notes:
> Changes in v2:
> - Update devicetree binding documentation to reflect that 98DX3336 and
> 984251 are supersets of 98DX3236.
> - disable crypto block
> - disable sdio for 98DX3236, enable for 98DX4251
> Changes in v3:
> - fix typo 4521 -> 4251
> - document prestera bindings
> - rework corediv-clock binding
> - add label to packet processor node
> - add new compatible string for DFX server
> Changes in v4:
> - Collect ack from Rob
> Changes in v5:
> - Fixup license text. Add labels to nodes.
> Changes in v6:
> - None
>
> .../devicetree/bindings/arm/marvell/98dx3236.txt | 23 ++
> .../devicetree/bindings/net/marvell,prestera.txt | 50 ++++
> arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 254 +++++++++++++++++++++
> arch/arm/boot/dts/armada-xp-98dx3336.dtsi | 76 ++++++
> arch/arm/boot/dts/armada-xp-98dx4251.dtsi | 90 ++++++++
> 5 files changed, 493 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
> create mode 100644 Documentation/devicetree/bindings/net/marvell,prestera.txt
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> create mode 100644 arch/arm/boot/dts/armada-xp-98dx4251.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
> new file mode 100644
> index 000000000000..64e8c73fc5ab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/marvell/98dx3236.txt
> @@ -0,0 +1,23 @@
> +Marvell 98DX3236, 98DX3336 and 98DX4251 Platforms Device Tree Bindings
> +----------------------------------------------------------------------
> +
> +Boards with a SoC of the Marvell 98DX3236, 98DX3336 and 98DX4251 families
> +shall have the following property:
> +
> +Required root node property:
> +
> +compatible: must contain "marvell,armadaxp-98dx3236"
> +
> +In addition, boards using the Marvell 98DX3336 SoC shall have the
> +following property:
> +
> +Required root node property:
> +
> +compatible: must contain "marvell,armadaxp-98dx3336"
> +
> +In addition, boards using the Marvell 98DX4251 SoC shall have the
> +following property:
> +
> +Required root node property:
> +
> +compatible: must contain "marvell,armadaxp-98dx4251"
> diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
> new file mode 100644
> index 000000000000..5fbab29718e8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
> @@ -0,0 +1,50 @@
> +Marvell Prestera Switch Chip bindings
> +-------------------------------------
> +
> +Required properties:
> +- compatible: one of the following
> + "marvell,prestera-98dx3236",
> + "marvell,prestera-98dx3336",
> + "marvell,prestera-98dx4251",
> +- reg: address and length of the register set for the device.
> +- interrupts: interrupt for the device
> +
> +Optional properties:
> +- dfx: phandle reference to the "DFX Server" node
> +
> +Example:
> +
> +switch {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
> +
> + packet-processor at 0 {
> + compatible = "marvell,prestera-98dx3236";
> + reg = <0 0x4000000>;
> + interrupts = <33>, <34>, <35>;
> + dfx = <&dfx>;
> + };
> +};
> +
> +DFX Server bindings
> +-------------------
> +
> +Required properties:
> +- compatible: must be "marvell,dfx-server"
> +- reg: address and length of the register set for the device.
> +
> +Example:
> +
> +dfx-registers {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
> +
> + dfx: dfx at 0 {
> + compatible = "marvell,dfx-server";
> + reg = <0 0x100000>;
> + };
> +};
> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> new file mode 100644
> index 000000000000..9461128fae24
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> @@ -0,0 +1,254 @@
> +/*
> + * Device Tree Include file for Marvell 98dx3236 family SoC
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * Contains definitions specific to the 98dx3236 SoC that are not
> + * common to all Armada XP SoCs.
> + */
> +
> +#include "armada-xp.dtsi"
> +
> +/ {
> + model = "Marvell 98DX3236 SoC";
> + compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> + aliases {
> + gpio0 = &gpio0;
> + gpio1 = &gpio1;
> + gpio2 = &gpio2;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-method = "marvell,98dx3236-smp";
> +
> + cpu at 0 {
> + device_type = "cpu";
> + compatible = "marvell,sheeva-v7";
> + reg = <0>;
> + clocks = <&cpuclk 0>;
> + clock-latency = <1000000>;
> + };
> + };
> +
> + soc {
> + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
> + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
> + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
> + MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
> + MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
> +
> + /*
> + * 98DX3236 has 1 x1 PCIe unit Gen2.0
> + */
> + pciec: pcie-controller at 82000000 {
> + compatible = "marvell,armada-xp-pcie";
> + status = "disabled";
> + device_type = "pci";
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + msi-parent = <&mpic>;
> + bus-range = <0x00 0xff>;
> +
> + ranges =
> + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
> + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
> + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
> + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
> +
> + pcie1: pcie at 1,0 {
> + device_type = "pci";
> + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
> + reg = <0x0800 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + #interrupt-cells = <1>;
> + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> + 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> + interrupt-map-mask = <0 0 0 0>;
> + interrupt-map = <0 0 0 0 &mpic 58>;
> + marvell,pcie-port = <0>;
> + marvell,pcie-lane = <0>;
> + clocks = <&gateclk 5>;
> + status = "disabled";
> + };
> + };
> +
> + internal-regs {
> + coreclk: mvebu-sar at 18230 {
> + compatible = "marvell,mv98dx3236-core-clock";
> + };
> +
> + cpuclk: clock-complex at 18700 {
> + compatible = "marvell,mv98dx3236-cpu-clock";
> + };
> +
> + corediv-clock at 18740 {
> + status = "disabled";
> + };
> +
> + xor at 60900 {
> + status = "disabled";
> + };
> +
> + crypto at 90000 {
> + status = "disabled";
> + };
> +
> + xor at f0900 {
> + status = "disabled";
> + };
> +
> + xor at f0800 {
> + compatible = "marvell,orion-xor";
> + reg = <0xf0800 0x100
> + 0xf0a00 0x100>;
> + clocks = <&gateclk 22>;
> + status = "okay";
> +
> + xor10 {
> + interrupts = <51>;
> + dmacap,memcpy;
> + dmacap,xor;
> + };
> + xor11 {
> + interrupts = <52>;
> + dmacap,memcpy;
> + dmacap,xor;
> + dmacap,memset;
> + };
> + };
> +
> + gpio0: gpio at 18100 {
> + compatible = "marvell,orion-gpio";
> + reg = <0x18100 0x40>;
> + ngpios = <32>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <82>, <83>, <84>, <85>;
> + };
> +
> + /* does not exist */
> + gpio1: gpio at 18140 {
> + compatible = "marvell,orion-gpio";
> + reg = <0x18140 0x40>;
> + status = "disabled";
> + };
> +
> + gpio2: gpio at 18180 { /* rework some properties */
> + compatible = "marvell,orion-gpio";
> + reg = <0x18180 0x40>;
> + ngpios = <1>; /* only gpio #32 */
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <87>;
> + };
> +
> + nand: nand at d0000 {
> + clocks = <&dfx_coredivclk 0>;
> + };
> + };
> +
> + dfxr: dfx-registers at ac000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
> +
> + dfx_coredivclk: corediv-clock at f8268 {
> + compatible = "marvell,mv98dx3236-corediv-clock";
> + reg = <0xf8268 0xc>;
> + #clock-cells = <1>;
> + clocks = <&mainpll>;
> + clock-output-names = "nand";
> + };
> +
> + dfx: dfx at 0 {
> + compatible = "marvell,dfx-server";
> + reg = <0 0x100000>;
> + };
> + };
> +
> + switch: switch at a8000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
> +
> + pp0: packet-processor at 0 {
> + compatible = "marvell,prestera-98dx3236";
> + reg = <0 0x4000000>;
> + interrupts = <33>, <34>, <35>;
> + dfx = <&dfx>;
> + };
> + };
> + };
> +};
> +
> +&pinctrl {
> + compatible = "marvell,98dx3236-pinctrl";
> +
> + spi0_pins: spi0-pins {
> + marvell,pins = "mpp0", "mpp1",
> + "mpp2", "mpp3";
> + marvell,function = "spi0";
> + };
> +};
> +
> +&sdio {
> + status = "disabled";
> +};
> +
> +&crypto_sram0 {
> + status = "disabled";
> +};
> +
> +&crypto_sram1 {
> + status = "disabled";
> +};
> diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> new file mode 100644
> index 000000000000..e1580afdc260
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> @@ -0,0 +1,76 @@
> +/*
> + * Device Tree Include file for Marvell 98dx3336 family SoC
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * Contains definitions specific to the 98dx3236 SoC that are not
> + * common to all Armada XP SoCs.
> + */
> +
> +#include "armada-xp-98dx3236.dtsi"
> +
> +/ {
> + model = "Marvell 98DX3336 SoC";
> + compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> + cpus {
> + cpu at 1 {
> + device_type = "cpu";
> + compatible = "marvell,sheeva-v7";
> + reg = <1>;
> + clocks = <&cpuclk 1>;
> + clock-latency = <1000000>;
> + };
> + };
> +
> + soc {
> + internal-regs {
> + resume at 20980 {
> + compatible = "marvell,98dx3336-resume-ctrl";
> + reg = <0x20980 0x10>;
> + };
> + };
> + };
> +};
> +
> +&pp0 {
> + compatible = "marvell,prestera-98dx3336";
> +};
> diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> new file mode 100644
> index 000000000000..4b0533a4ccb7
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * Device Tree Include file for Marvell 98dx4521 family SoC
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * Contains definitions specific to the 98dx4521 SoC that are not
> + * common to all Armada XP SoCs.
> + */
> +
> +#include "armada-xp-98dx3236.dtsi"
> +
> +/ {
> + model = "Marvell 98DX4251 SoC";
> + compatible = "marvell,armadaxp-98dx4521", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> + cpus {
> + cpu at 1 {
> + device_type = "cpu";
> + compatible = "marvell,sheeva-v7";
> + reg = <1>;
> + clocks = <&cpuclk 1>;
> + clock-latency = <1000000>;
> + };
> + };
> +
> + soc {
> + internal-regs {
> + resume at 20980 {
> + compatible = "marvell,98dx3336-resume-ctrl";
> + reg = <0x20980 0x10>;
> + };
> + };
> + };
> +};
> +
> +&sdio {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + compatible = "marvell,98dx4251-pinctrl";
> +
> + sdio_pins: sdio-pins {
> + marvell,pins = "mpp5", "mpp6", "mpp7",
> + "mpp8", "mpp9", "mpp10";
> + marvell,function = "sd0";
> + };
> +};
> +
> +&pp0 {
> + compatible = "marvell,prestera-98dx4251";
> +};
> --
> 2.11.0.24.ge6920cf
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v6 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
2017-01-29 23:20 ` [PATCH v6 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
@ 2017-01-30 14:29 ` Gregory CLEMENT
2017-01-30 22:02 ` Chris Packham
0 siblings, 1 reply; 12+ messages in thread
From: Gregory CLEMENT @ 2017-01-30 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Hi Chris,
On lun., janv. 30 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
> These boards are Marvell's evaluation boards for the 98DX4251 and
> 98DX3336 SoCs.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Applied on mvebu/dt
Thanks,
Gregory
> ---
>
> Notes:
> Changes in v5:
> - update license text
> - use node labels
> Changes in v6:
> - Rename dts files to include 'armada-xp-' prefix
>
> arch/arm/boot/dts/armada-xp-db-dxbc2.dts | 151 ++++++++++++++++++++++++++
> arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 142 ++++++++++++++++++++++++
> 2 files changed, 293 insertions(+)
> create mode 100644 arch/arm/boot/dts/armada-xp-db-dxbc2.dts
> create mode 100644 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
>
> diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
> new file mode 100644
> index 000000000000..a8130805074e
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
> @@ -0,0 +1,151 @@
> +/*
> + * Device Tree file for DB-DXBC2 board
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * Based on armada-xp-db.dts
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * Note: this Device Tree assumes that the bootloader has remapped the
> + * internal registers to 0xf1000000 (instead of the default
> + * 0xd0000000). The 0xf1000000 is the default used by the recent,
> + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
> + * boards were delivered with an older version of the bootloader that
> + * left internal registers mapped at 0xd0000000. If you are in this
> + * situation, you should either update your bootloader (preferred
> + * solution) or the below Device Tree should be adjusted.
> + */
> +
> +/dts-v1/;
> +#include "armada-xp-98dx4251.dtsi"
> +
> +/ {
> + model = "Marvell Bobcat2 Evaluation Board";
> + compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200 earlyprintk";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
> + };
> +
> +};
> +
> +&devbus_bootcs {
> + status = "okay";
> +
> + /* Device Bus parameters are required */
> +
> + /* Read parameters */
> + devbus,bus-width = <16>;
> + devbus,turn-off-ps = <60000>;
> + devbus,badr-skew-ps = <0>;
> + devbus,acc-first-ps = <124000>;
> + devbus,acc-next-ps = <248000>;
> + devbus,rd-setup-ps = <0>;
> + devbus,rd-hold-ps = <0>;
> +
> + /* Write parameters */
> + devbus,sync-enable = <0>;
> + devbus,wr-high-ps = <60000>;
> + devbus,wr-low-ps = <60000>;
> + devbus,ale-wr-ps = <60000>;
> +};
> +
> +&i2c0 {
> + clock-frequency = <100000>;
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&nand {
> + status = "okay";
> + num-cs = <1>;
> + marvell,nand-keep-config;
> + marvell,nand-enable-arbiter;
> + nand-on-flash-bbt;
> + nand-ecc-strength = <4>;
> + nand-ecc-step-size = <512>;
> +};
> +
> +&sdio {
> + pinctrl-0 = <&sdio_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> + /* No CD or WP GPIOs */
> + broken-cd;
> +};
> +
> +&spi0 {
> + status = "okay";
> +
> + spi-flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "m25p64";
> + reg = <0>; /* Chip select 0 */
> + spi-max-frequency = <20000000>;
> + m25p,fast-read;
> +
> + partition at u-boot {
> + reg = <0x00000000 0x00100000>;
> + label = "u-boot";
> + };
> + partition at u-boot-env {
> + reg = <0x00100000 0x00040000>;
> + label = "u-boot-env";
> + };
> + partition at unused {
> + reg = <0x00140000 0x00ec0000>;
> + label = "unused";
> + };
> +
> + };
> +};
> diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
> new file mode 100644
> index 000000000000..4e07cb6ed800
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
> @@ -0,0 +1,142 @@
> +/*
> + * Device Tree file for DB-XC3-24G4XG board
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * Based on armada-xp-db.dts
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * Note: this Device Tree assumes that the bootloader has remapped the
> + * internal registers to 0xf1000000 (instead of the default
> + * 0xd0000000). The 0xf1000000 is the default used by the recent,
> + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
> + * boards were delivered with an older version of the bootloader that
> + * left internal registers mapped at 0xd0000000. If you are in this
> + * situation, you should either update your bootloader (preferred
> + * solution) or the below Device Tree should be adjusted.
> + */
> +
> +/dts-v1/;
> +#include "armada-xp-98dx3336.dtsi"
> +
> +/ {
> + model = "DB-XC3-24G4XG";
> + compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200 earlyprintk";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
> + };
> +};
> +
> +&devbus_bootcs {
> + status = "okay";
> +
> + /* Device Bus parameters are required */
> +
> + /* Read parameters */
> + devbus,bus-width = <16>;
> + devbus,turn-off-ps = <60000>;
> + devbus,badr-skew-ps = <0>;
> + devbus,acc-first-ps = <124000>;
> + devbus,acc-next-ps = <248000>;
> + devbus,rd-setup-ps = <0>;
> + devbus,rd-hold-ps = <0>;
> +
> + /* Write parameters */
> + devbus,sync-enable = <0>;
> + devbus,wr-high-ps = <60000>;
> + devbus,wr-low-ps = <60000>;
> + devbus,ale-wr-ps = <60000>;
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <100000>;
> + status = "okay";
> +};
> +
> +&nand {
> + status = "okay";
> + num-cs = <1>;
> + marvell,nand-keep-config;
> + marvell,nand-enable-arbiter;
> + nand-on-flash-bbt;
> + nand-ecc-strength = <4>;
> + nand-ecc-step-size = <512>;
> +};
> +
> +&spi0 {
> + status = "okay";
> +
> + spi-flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "m25p64";
> + reg = <0>; /* Chip select 0 */
> + spi-max-frequency = <20000000>;
> + m25p,fast-read;
> +
> + partition at u-boot {
> + reg = <0x00000000 0x00100000>;
> + label = "u-boot";
> + };
> + partition at u-boot-env {
> + reg = <0x00100000 0x00040000>;
> + label = "u-boot-env";
> + };
> + partition at unused {
> + reg = <0x00140000 0x00ec0000>;
> + label = "unused";
> + };
> +
> + };
> +};
> --
> 2.11.0.24.ge6920cf
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v6 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
2017-01-30 14:29 ` Gregory CLEMENT
@ 2017-01-30 22:02 ` Chris Packham
2017-01-31 11:05 ` Gregory CLEMENT
0 siblings, 1 reply; 12+ messages in thread
From: Chris Packham @ 2017-01-30 22:02 UTC (permalink / raw)
To: linux-arm-kernel
Hi Gregory,
On 31/01/17 03:29, Gregory CLEMENT wrote:
> Hi Chris,
>
> On lun., janv. 30 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>
>> These boards are Marvell's evaluation boards for the 98DX4251 and
>> 98DX3336 SoCs.
>>
>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>
> Applied on mvebu/dt
>
I just noticed that I hadn't updated arch/arm/boot/dts/Makefile. The way
I've been building things (explicitly running 'make
armada-xp-db-xc3-24g4xg.dtb') it hasn't mattered to me but I'm wondering
if I should have?
>> ---
>>
>> Notes:
>> Changes in v5:
>> - update license text
>> - use node labels
>> Changes in v6:
>> - Rename dts files to include 'armada-xp-' prefix
>>
>> arch/arm/boot/dts/armada-xp-db-dxbc2.dts | 151 ++++++++++++++++++++++++++
>> arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 142 ++++++++++++++++++++++++
>> 2 files changed, 293 insertions(+)
>> create mode 100644 arch/arm/boot/dts/armada-xp-db-dxbc2.dts
>> create mode 100644 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
>>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v6 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards
2017-01-30 22:02 ` Chris Packham
@ 2017-01-31 11:05 ` Gregory CLEMENT
0 siblings, 0 replies; 12+ messages in thread
From: Gregory CLEMENT @ 2017-01-31 11:05 UTC (permalink / raw)
To: linux-arm-kernel
Hi Chris,
On lun., janv. 30 2017, Chris Packham <Chris.Packham@alliedtelesis.co.nz> wrote:
> Hi Gregory,
>
> On 31/01/17 03:29, Gregory CLEMENT wrote:
>> Hi Chris,
>>
>> On lun., janv. 30 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote:
>>
>>> These boards are Marvell's evaluation boards for the 98DX4251 and
>>> 98DX3336 SoCs.
>>>
>>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
>>
>> Applied on mvebu/dt
>>
>
> I just noticed that I hadn't updated arch/arm/boot/dts/Makefile. The way
> I've been building things (explicitly running 'make
> armada-xp-db-xc3-24g4xg.dtb') it hasn't mattered to me but I'm wondering
> if I should have?
As I didn't make a Pull request yet, I was able to fix it on the fly.
Gregory
>
>>> ---
>>>
>>> Notes:
>>> Changes in v5:
>>> - update license text
>>> - use node labels
>>> Changes in v6:
>>> - Rename dts files to include 'armada-xp-' prefix
>>>
>>> arch/arm/boot/dts/armada-xp-db-dxbc2.dts | 151 ++++++++++++++++++++++++++
>>> arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 142 ++++++++++++++++++++++++
>>> 2 files changed, 293 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/armada-xp-db-dxbc2.dts
>>> create mode 100644 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
>>>
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-01-31 11:05 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-01-29 23:20 [PATCHv5 0/5] Support for Marvell switches with integrated CPUs Chris Packham
2017-01-29 23:20 ` [PATCH v6 1/5] clk: mvebu: support for 98DX3236 SoC Chris Packham
2017-01-29 23:20 ` [PATCH v6 2/5] arm: mvebu: support for SMP on 98DX3336 SoC Chris Packham
2017-01-30 14:26 ` Gregory CLEMENT
2017-01-29 23:20 ` [PATCH v6 3/5] pinctrl: mvebu: pinctrl driver for 98DX3236 SoC Chris Packham
2017-01-30 13:58 ` Linus Walleij
2017-01-29 23:20 ` [PATCH v6 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs Chris Packham
2017-01-30 14:29 ` Gregory CLEMENT
2017-01-29 23:20 ` [PATCH v6 5/5] arm: mvebu: Add device tree for db-dxbc2 and db-xc3-24g4xg boards Chris Packham
2017-01-30 14:29 ` Gregory CLEMENT
2017-01-30 22:02 ` Chris Packham
2017-01-31 11:05 ` Gregory CLEMENT
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).