From: seanpaul@chromium.org (Sean Paul)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 09/24] drm/rockchip: dw-mipi-dsi: only request HS clock when required
Date: Mon, 30 Jan 2017 13:20:30 -0500 [thread overview]
Message-ID: <20170130182030.GJ20076@art_vandelay> (raw)
In-Reply-To: <20170129132444.25251-10-john@metanate.com>
On Sun, Jan 29, 2017 at 01:24:29PM +0000, John Keeping wrote:
> Requesting the HS clock from the PHY before we initialize it causes an
> invalid signal to be sent out since the input clock is not yet
> configured. The PHY databook suggests only asserting this signal when
> performing HS transfers, so let's do that.
>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
> Signed-off-by: John Keeping <john@metanate.com>
> Reviewed-by: Chris Zhong <zyw@rock-chips.com>
> ---
> v3:
> - Add Chris' Reviewed-by
> Unchanged in v2
>
> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index 15d33c3c8cb7..03fc096fe1bd 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -545,13 +545,15 @@ static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
> static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
> const struct mipi_dsi_msg *msg)
> {
> + bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
> u32 val = 0;
>
> if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
> val |= EN_ACK_RQST;
> - if (msg->flags & MIPI_DSI_MSG_USE_LPM)
> + if (lpm)
> val |= CMD_MODE_ALL_LP;
>
> + dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
> dsi_write(dsi, DSI_CMD_MODE_CFG, val);
> }
>
> @@ -693,6 +695,7 @@ static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
> dsi_write(dsi, DSI_PWR_UP, RESET);
> dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
> dw_mipi_dsi_video_mode_config(dsi);
> + dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> dsi_write(dsi, DSI_PWR_UP, POWERUP);
> }
> }
> @@ -710,7 +713,6 @@ static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
> | PHY_RSTZ | PHY_SHUTDOWNZ);
> dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
> TX_ESC_CLK_DIVIDSION(7));
> - dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> }
>
> static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
> --
> 2.11.0.197.gb556de5.dirty
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Sean Paul, Software Engineer, Google / Chromium OS
next prev parent reply other threads:[~2017-01-30 18:20 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-29 13:24 [PATCH v3 00/24] drm/rockchip: MIPI fixes & improvements John Keeping
2017-01-29 13:24 ` [PATCH v3 01/24] drm/rockchip: dw-mipi-dsi: don't configure hardware in mode_set for MIPI John Keeping
2017-01-30 15:35 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 02/24] drm/rockchip: dw-mipi-dsi: pass mode in where needed John Keeping
2017-01-30 15:40 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 03/24] drm/rockchip: dw-mipi-dsi: remove mode_set hook John Keeping
2017-01-30 15:40 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 04/24] drm/rockchip: dw-mipi-dsi: fix command header writes John Keeping
2017-01-30 15:43 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 05/24] drm/rockchip: dw-mipi-dsi: fix generic packet status check John Keeping
2017-01-30 17:56 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 06/24] drm/rockchip: dw-mipi-dsi: avoid out-of-bounds read on tx_buf John Keeping
2017-01-30 18:01 ` Sean Paul
2017-01-30 18:16 ` John Keeping
2017-01-30 20:09 ` Sean Paul
2017-01-31 11:45 ` John Keeping
2017-01-31 14:48 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 07/24] drm/rockchip: dw-mipi-dsi: include bad value in error message John Keeping
2017-01-30 18:02 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 08/24] drm/rockchip: dw-mipi-dsi: respect message flags John Keeping
2017-01-30 18:19 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 09/24] drm/rockchip: dw-mipi-dsi: only request HS clock when required John Keeping
2017-01-30 18:20 ` Sean Paul [this message]
2017-01-29 13:24 ` [PATCH v3 10/24] drm/rockchip: dw-mipi-dsi: don't assume buffer is aligned John Keeping
2017-01-30 20:08 ` Sean Paul
2017-01-31 11:56 ` John Keeping
2017-01-31 14:53 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 11/24] drm/rockchip: dw-mipi-dsi: prepare panel after phy init John Keeping
2017-01-30 20:16 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 12/24] drm/rockchip: dw-mipi-dsi: allow commands in panel_disable John Keeping
2017-01-30 20:19 ` Sean Paul
2017-01-31 12:03 ` John Keeping
2017-01-29 13:24 ` [PATCH v3 13/24] drm/rockchip: dw-mipi-dsi: fix escape clock rate John Keeping
2017-01-30 20:25 ` Sean Paul
2017-02-01 17:23 ` John Keeping
2017-01-29 13:24 ` [PATCH v3 14/24] drm/rockchip: dw-mipi-dsi: ensure PHY is reset John Keeping
2017-01-30 20:25 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 15/24] drm/rockchip: dw-mipi-dsi: configure PHY before enabling John Keeping
2017-01-30 20:28 ` Sean Paul
2017-01-31 12:14 ` John Keeping
2017-01-29 13:24 ` [PATCH v3 16/24] drm/rockchip: dw-mipi-dsi: properly configure PHY timing John Keeping
2017-01-30 21:57 ` Sean Paul
2017-01-31 12:39 ` John Keeping
2017-01-29 13:24 ` [PATCH v3 17/24] drm/rockchip: dw-mipi-dsi: improve PLL configuration John Keeping
2017-01-31 19:03 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 18/24] drm/rockchip: dw-mipi-dsi: use specific poll helper John Keeping
2017-01-31 18:45 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 19/24] drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC John Keeping
2017-01-31 19:12 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 20/24] drm/rockchip: vop: test for P{H,V}SYNC John Keeping
2017-01-31 19:14 ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 21/24] drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded John Keeping
2017-01-31 19:21 ` Sean Paul
2017-02-10 17:27 ` John Keeping
2017-01-29 13:24 ` [PATCH v3 22/24] drm/rockchip: dw-mipi-dsi: support non-burst modes John Keeping
2017-01-31 19:22 ` Sean Paul
2017-02-16 3:01 ` Chris Zhong
2017-02-16 14:22 ` John Keeping
2017-01-29 13:24 ` [PATCH v3 23/24] drm/rockchip: dw-mipi-dsi: add reset control John Keeping
2017-01-31 19:28 ` Sean Paul
2017-02-15 3:38 ` Chris Zhong
2017-02-15 12:39 ` John Keeping
2017-02-16 2:12 ` Chris Zhong
2017-02-16 14:11 ` John Keeping
2017-01-29 13:24 ` [PATCH v3 24/24] drm/rockchip: dw-mipi-dsi: support read commands John Keeping
2017-01-30 15:26 ` Sean Paul
2017-01-30 18:14 ` John Keeping
2017-01-30 20:16 ` Sean Paul
2017-01-31 12:41 ` John Keeping
2017-01-31 14:47 ` Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170130182030.GJ20076@art_vandelay \
--to=seanpaul@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).