From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Tue, 31 Jan 2017 09:56:26 +0100 Subject: [GIT PULL] Allwinner DT changes for 4.11 Message-ID: <20170131085626.tg4a6rinnwfze6eq@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Arnd, Olof, Please pull the following changes for the next merge window. Thanks! Maxime The following changes since commit 1edcd36fcb48fe841bcc62eda36c105037d9583c: ARM: sunxi: Convert pinctrl nodes to generic bindings (2016-12-26 08:27:11 +0100) are available in the git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-4.11 for you to fetch changes up to ef09e0f539f124c67aa44d4154730bc8492196bf: ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2 (2017-01-27 21:09:58 +0100) ---------------------------------------------------------------- Allwinner DT changes for 4.11 The usual chunk of DT changes, most notably: - Support for the H2+ and the V3s - CPUFreq support for the A33 - SPDIF support for the A31 and H3 - New boards: Beelink X2, Lichee Pi One, Lichee Pi Zero, Orange Pi Zero ---------------------------------------------------------------- Chen-Yu Tsai (8): ARM: dts: sunxi: Explicitly enable pull-ups for MMC pins ARM: dts: sun6i: hummingbird: Enable USB OTG ARM: dts: sun8i: Add codec analog path controls node in PRCM for A23/A33 ARM: dts: sun8i-a23: Add device node for internal audio codec ARM: dts: sun8i-a23: q8-tablet: Enable internal audio codec ARM: dts: sun8i-h3: Add device nodes for audio codec and its analog controls ARM: dts: sun8i-h3: orange-pi-pc: Enable audio codec ARM: dts: sun6i: sina31s: Enable USB OTG controller in peripheral mode Emmanuel Vadot (3): ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2 ARM: dts: sunxi: Add num-cs for A20 spi nodes ARM: dts: sunxi: Enable UEXT related nodes for Olimex A20 SOM EVB Icenowy Zheng (11): ARM: dts: sunxi: add support for Orange Pi Zero board ARM: dts: sun8i: add a cpu0 label to cpu at 0 node on A23/33 ARM: dts: sun8i: set cpu-supply in reference tablet DTSI ARM: dts: sun8i: add opp-v2 table for A33 ARM: dts: sun8i: add a delay after reset xr819 on Orange Pi Zero ARM: dts: sun5i: add a pinctrl node for 4bit mmc2 dt-bindings: add vendor prefix for Lichee Pi ARM: dts: sun5i: add support for Lichee Pi One board devicetree: bindings: Add vendor prefix for Shenzhen Xunlong Software ARM: dts: sunxi: add dtsi file for V3s SoC ARM: dts: sunxi: add support for Lichee Pi Zero board J?rg Krause (2): ARM: dts: sun7i: Enable audio codec on Banana Pro ARM: dts: sun7i: Add wifi dt node on Banana Pro Marcus Cooper (9): ARM: dts: sun6i: Mele I7: Enable internal audio codec ARM: dts: sun6i: Add SPDIF TX pin to the A31 ARM: dts: sun6i: Add the SPDIF block to the A31 ARM: dts: sun4i: A1000: add axp209 regulator nodes ARM: dts: sun6i: Add SPDIF to the Mele I7 ARM: dts: sun8i-h3: Add dts for the Beelink X2 STB ARM: dts: sun8i-h3: Add SPDIF TX pin to the H3 ARM: dts: sun8i-h3: Add the SPDIF block to the H3 ARM: dts: sun8i-h3: Add SPDIF to the Beelink X2 Maxime Ripard (3): ARM: sun8i: a23/a33: Enable the real LOSC and use it ARM: sun8i: a23/a33: Add the oscillators accuracy ARM: sun8i: sina33: Enable display Quentin Schulz (6): dt-bindings: power: axp20x-usb: add axp223 compatible ARM: dts: add DTSI for AXP223 ARM: dts: sun8i: a33-olinuxino: use AXP223 DTSI ARM: dts: sun8i: sina33: use AXP223 DTSI ARM: dts: sun8i: parrot: use AXP223 DTSI ARM: dts: sun8i: reference-design: use AXP223 DTSI .../bindings/power/supply/axp20x_usb_power.txt | 5 + .../devicetree/bindings/vendor-prefixes.txt | 2 + arch/arm/boot/dts/Makefile | 6 +- arch/arm/boot/dts/axp223.dtsi | 58 ++++ arch/arm/boot/dts/sun4i-a10-a1000.dts | 31 +++ arch/arm/boot/dts/sun4i-a10.dtsi | 1 + arch/arm/boot/dts/sun5i-a13-licheepi-one.dts | 224 +++++++++++++++ arch/arm/boot/dts/sun5i.dtsi | 9 + arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 19 ++ arch/arm/boot/dts/sun6i-a31-i7.dts | 30 ++ arch/arm/boot/dts/sun6i-a31.dtsi | 22 ++ arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 5 + arch/arm/boot/dts/sun7i-a20-bananapro.dts | 33 ++- arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 38 +++ arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 90 +++--- arch/arm/boot/dts/sun7i-a20.dtsi | 6 + arch/arm/boot/dts/sun8i-a23-a33.dtsi | 24 +- arch/arm/boot/dts/sun8i-a23-q8-tablet.dts | 23 ++ arch/arm/boot/dts/sun8i-a23.dtsi | 16 ++ arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 2 +- arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 36 ++- arch/arm/boot/dts/sun8i-a33.dtsi | 35 +++ arch/arm/boot/dts/sun8i-a83t.dtsi | 1 + arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 160 +++++++++++ arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 160 +++++++++++ arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 8 + arch/arm/boot/dts/sun8i-h3.dtsi | 40 +++ arch/arm/boot/dts/sun8i-r16-parrot.dts | 2 +- .../boot/dts/sun8i-reference-design-tablet.dtsi | 6 +- arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts | 103 +++++++ arch/arm/boot/dts/sun8i-v3s.dtsi | 309 +++++++++++++++++++++ arch/arm/boot/dts/sun9i-a80.dtsi | 3 + 32 files changed, 1436 insertions(+), 71 deletions(-) create mode 100644 arch/arm/boot/dts/axp223.dtsi create mode 100644 arch/arm/boot/dts/sun5i-a13-licheepi-one.dts create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts create mode 100644 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts create mode 100644 arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts create mode 100644 arch/arm/boot/dts/sun8i-v3s.dtsi -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: