linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: seanpaul@chromium.org (Sean Paul)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 22/24] drm/rockchip: dw-mipi-dsi: support non-burst modes
Date: Tue, 31 Jan 2017 14:22:55 -0500	[thread overview]
Message-ID: <20170131192255.GF20076@art_vandelay> (raw)
In-Reply-To: <20170129132444.25251-23-john@metanate.com>

On Sun, Jan 29, 2017 at 01:24:42PM +0000, John Keeping wrote:

Reviewed-by: Sean Paul <seanpaul@chromium.org>

> Signed-off-by: John Keeping <john@metanate.com>
> Reviewed-by: Chris Zhong <zyw@rock-chips.com>
> ---
> v3:
> - Add Chris' Reviewed-by
> Unchanged in v2
> 
>  drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 16 +++++++++-------
>  1 file changed, 9 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index 5bad92e2370e..58cb8ace2fe8 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -82,6 +82,7 @@
>  #define FRAME_BTA_ACK			BIT(14)
>  #define ENABLE_LOW_POWER		(0x3f << 8)
>  #define ENABLE_LOW_POWER_MASK		(0x3f << 8)
> +#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
>  #define VID_MODE_TYPE_BURST_SYNC_PULSES		0x2
>  #define VID_MODE_TYPE_MASK			0x3
>  
> @@ -286,6 +287,7 @@ struct dw_mipi_dsi {
>  	u32 format;
>  	u16 input_div;
>  	u16 feedback_div;
> +	unsigned long mode_flags;
>  
>  	const struct dw_mipi_dsi_plat_data *pdata;
>  };
> @@ -551,15 +553,10 @@ static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
>  		return -EINVAL;
>  	}
>  
> -	if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) ||
> -	    !(device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) {
> -		dev_err(dsi->dev, "device mode is unsupported\n");
> -		return -EINVAL;
> -	}
> -
>  	dsi->lanes = device->lanes;
>  	dsi->channel = device->channel;
>  	dsi->format = device->format;
> +	dsi->mode_flags = device->mode_flags;
>  	dsi->panel = of_drm_find_panel(device->dev.of_node);
>  	if (dsi->panel)
>  		return drm_panel_attach(dsi->panel, &dsi->connector);
> @@ -716,7 +713,12 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>  {
>  	u32 val;
>  
> -	val = VID_MODE_TYPE_BURST_SYNC_PULSES | ENABLE_LOW_POWER;
> +	val = ENABLE_LOW_POWER;
> +
> +	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> +		val |= VID_MODE_TYPE_BURST_SYNC_PULSES;
> +	else if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE))
> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>  
>  	dsi_write(dsi, DSI_VID_MODE_CFG, val);
>  }
> -- 
> 2.11.0.197.gb556de5.dirty
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Sean Paul, Software Engineer, Google / Chromium OS

  reply	other threads:[~2017-01-31 19:22 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-29 13:24 [PATCH v3 00/24] drm/rockchip: MIPI fixes & improvements John Keeping
2017-01-29 13:24 ` [PATCH v3 01/24] drm/rockchip: dw-mipi-dsi: don't configure hardware in mode_set for MIPI John Keeping
2017-01-30 15:35   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 02/24] drm/rockchip: dw-mipi-dsi: pass mode in where needed John Keeping
2017-01-30 15:40   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 03/24] drm/rockchip: dw-mipi-dsi: remove mode_set hook John Keeping
2017-01-30 15:40   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 04/24] drm/rockchip: dw-mipi-dsi: fix command header writes John Keeping
2017-01-30 15:43   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 05/24] drm/rockchip: dw-mipi-dsi: fix generic packet status check John Keeping
2017-01-30 17:56   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 06/24] drm/rockchip: dw-mipi-dsi: avoid out-of-bounds read on tx_buf John Keeping
2017-01-30 18:01   ` Sean Paul
2017-01-30 18:16     ` John Keeping
2017-01-30 20:09       ` Sean Paul
2017-01-31 11:45         ` John Keeping
2017-01-31 14:48           ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 07/24] drm/rockchip: dw-mipi-dsi: include bad value in error message John Keeping
2017-01-30 18:02   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 08/24] drm/rockchip: dw-mipi-dsi: respect message flags John Keeping
2017-01-30 18:19   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 09/24] drm/rockchip: dw-mipi-dsi: only request HS clock when required John Keeping
2017-01-30 18:20   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 10/24] drm/rockchip: dw-mipi-dsi: don't assume buffer is aligned John Keeping
2017-01-30 20:08   ` Sean Paul
2017-01-31 11:56     ` John Keeping
2017-01-31 14:53       ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 11/24] drm/rockchip: dw-mipi-dsi: prepare panel after phy init John Keeping
2017-01-30 20:16   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 12/24] drm/rockchip: dw-mipi-dsi: allow commands in panel_disable John Keeping
2017-01-30 20:19   ` Sean Paul
2017-01-31 12:03     ` John Keeping
2017-01-29 13:24 ` [PATCH v3 13/24] drm/rockchip: dw-mipi-dsi: fix escape clock rate John Keeping
2017-01-30 20:25   ` Sean Paul
2017-02-01 17:23     ` John Keeping
2017-01-29 13:24 ` [PATCH v3 14/24] drm/rockchip: dw-mipi-dsi: ensure PHY is reset John Keeping
2017-01-30 20:25   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 15/24] drm/rockchip: dw-mipi-dsi: configure PHY before enabling John Keeping
2017-01-30 20:28   ` Sean Paul
2017-01-31 12:14     ` John Keeping
2017-01-29 13:24 ` [PATCH v3 16/24] drm/rockchip: dw-mipi-dsi: properly configure PHY timing John Keeping
2017-01-30 21:57   ` Sean Paul
2017-01-31 12:39     ` John Keeping
2017-01-29 13:24 ` [PATCH v3 17/24] drm/rockchip: dw-mipi-dsi: improve PLL configuration John Keeping
2017-01-31 19:03   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 18/24] drm/rockchip: dw-mipi-dsi: use specific poll helper John Keeping
2017-01-31 18:45   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 19/24] drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC John Keeping
2017-01-31 19:12   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 20/24] drm/rockchip: vop: test for P{H,V}SYNC John Keeping
2017-01-31 19:14   ` Sean Paul
2017-01-29 13:24 ` [PATCH v3 21/24] drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded John Keeping
2017-01-31 19:21   ` Sean Paul
2017-02-10 17:27     ` John Keeping
2017-01-29 13:24 ` [PATCH v3 22/24] drm/rockchip: dw-mipi-dsi: support non-burst modes John Keeping
2017-01-31 19:22   ` Sean Paul [this message]
2017-02-16  3:01     ` Chris Zhong
2017-02-16 14:22       ` John Keeping
2017-01-29 13:24 ` [PATCH v3 23/24] drm/rockchip: dw-mipi-dsi: add reset control John Keeping
2017-01-31 19:28   ` Sean Paul
2017-02-15  3:38   ` Chris Zhong
2017-02-15 12:39     ` John Keeping
2017-02-16  2:12       ` Chris Zhong
2017-02-16 14:11         ` John Keeping
2017-01-29 13:24 ` [PATCH v3 24/24] drm/rockchip: dw-mipi-dsi: support read commands John Keeping
2017-01-30 15:26   ` Sean Paul
2017-01-30 18:14     ` John Keeping
2017-01-30 20:16       ` Sean Paul
2017-01-31 12:41         ` John Keeping
2017-01-31 14:47           ` Sean Paul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170131192255.GF20076@art_vandelay \
    --to=seanpaul@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).