[PATCH v3] ARM: dts: i.MX25: add AIPS control registers

[s.hauer@pengutronix.de (Sascha Hauer)]

On Fri, Feb 03, 2017 at 01:59:52PM +0100, Martin Kaiser wrote:
> The i.MX25 contains two AHB to IP bridges (AIPS), each of which has a set of
> control registers. Add the memory regions for the control registers to
> the Device Tree.
> 
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>

Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>

Sascha

> ---
> v3:
>    fixed the size of the memory regions, both are 16KBytes long
> 
> v2:
>    removed the "fsl,imx53-aipstz" property as per Sascha's request
> 
>  arch/arm/boot/dts/imx25.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
> index e0ba550..5ae8a14 100644
> --- a/arch/arm/boot/dts/imx25.dtsi
> +++ b/arch/arm/boot/dts/imx25.dtsi
> @@ -93,6 +93,11 @@
>  			reg = <0x43f00000 0x100000>;
>  			ranges;
>  
> +			aips1: bridge at 43f00000 {
> +				compatible = "fsl,imx25-aips";
> +				reg = <0x43f00000 0x4000>;
> +			};
> +
>  			i2c1: i2c at 43f80000 {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> @@ -342,6 +347,11 @@
>  			reg = <0x53f00000 0x100000>;
>  			ranges;
>  
> +			aips2: bridge at 53f00000 {
> +				compatible = "fsl,imx25-aips";
> +				reg = <0x53f00000 0x4000>;
> +			};
> +
>  			clks: ccm at 53f80000 {
>  				compatible = "fsl,imx25-ccm";
>  				reg = <0x53f80000 0x4000>;
> -- 
> 2.1.4
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |