From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] phy: exynos4: Remove duplicated defines of PHY register defines
Date: Wed, 8 Feb 2017 11:58:56 +0000 [thread overview]
Message-ID: <20170208115856.f6se6btiylv6usip@dell> (raw)
In-Reply-To: <20170127200510.4444-2-krzk@kernel.org>
On Fri, 27 Jan 2017, Krzysztof Kozlowski wrote:
> Phy drivers access PMU region through regmap provided by exynos-pmu
> driver. However there is no need to duplicate defines for PMU
> registers. Instead just use whatever is defined in exynos-regs-pmu.h.
>
> Additionally MIPI PHY registers for Exynos5433 start from the same
> address as Exynos4 and Exynos5250 so re-use existing defines.
>
> This reduces number of defines and allows removal of one header file.
>
> Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> drivers/phy/phy-exynos-mipi-video.c | 12 ++++++------
> include/linux/mfd/syscon/exynos4-pmu.h | 21 ---------------------
> include/linux/mfd/syscon/exynos5-pmu.h | 3 ---
Love that diff!
Acked-by: Lee Jones <lee.jones@linaro.org>
> include/linux/soc/samsung/exynos-regs-pmu.h | 9 ++++++++-
> 4 files changed, 14 insertions(+), 31 deletions(-)
> delete mode 100644 include/linux/mfd/syscon/exynos4-pmu.h
>
> diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
> index 6bee04cc4d53..d7fe1f8c3ac8 100644
> --- a/drivers/phy/phy-exynos-mipi-video.c
> +++ b/drivers/phy/phy-exynos-mipi-video.c
> @@ -12,7 +12,6 @@
> #include <linux/err.h>
> #include <linux/io.h>
> #include <linux/kernel.h>
> -#include <linux/mfd/syscon/exynos4-pmu.h>
> #include <linux/mfd/syscon/exynos5-pmu.h>
> #include <linux/module.h>
> #include <linux/of.h>
> @@ -21,6 +20,7 @@
> #include <linux/phy/phy.h>
> #include <linux/regmap.h>
> #include <linux/spinlock.h>
> +#include <linux/soc/samsung/exynos-regs-pmu.h>
> #include <linux/mfd/syscon.h>
>
> enum exynos_mipi_phy_id {
> @@ -173,7 +173,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
> /* EXYNOS_MIPI_PHY_ID_CSIS0 */
> .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
> .enable_val = EXYNOS5_PHY_ENABLE,
> - .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
> + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
> .enable_map = EXYNOS_MIPI_REGMAP_PMU,
> .resetn_val = BIT(0),
> .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
> @@ -182,7 +182,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
> /* EXYNOS_MIPI_PHY_ID_DSIM0 */
> .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
> .enable_val = EXYNOS5_PHY_ENABLE,
> - .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
> + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
> .enable_map = EXYNOS_MIPI_REGMAP_PMU,
> .resetn_val = BIT(0),
> .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
> @@ -191,7 +191,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
> /* EXYNOS_MIPI_PHY_ID_CSIS1 */
> .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
> .enable_val = EXYNOS5_PHY_ENABLE,
> - .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
> + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
> .enable_map = EXYNOS_MIPI_REGMAP_PMU,
> .resetn_val = BIT(1),
> .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
> @@ -200,7 +200,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
> /* EXYNOS_MIPI_PHY_ID_DSIM1 */
> .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
> .enable_val = EXYNOS5_PHY_ENABLE,
> - .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
> + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
> .enable_map = EXYNOS_MIPI_REGMAP_PMU,
> .resetn_val = BIT(1),
> .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
> @@ -209,7 +209,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
> /* EXYNOS_MIPI_PHY_ID_CSIS2 */
> .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
> .enable_val = EXYNOS5_PHY_ENABLE,
> - .enable_reg = EXYNOS5433_MIPI_PHY2_CONTROL,
> + .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2),
> .enable_map = EXYNOS_MIPI_REGMAP_PMU,
> .resetn_val = BIT(0),
> .resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON,
> diff --git a/include/linux/mfd/syscon/exynos4-pmu.h b/include/linux/mfd/syscon/exynos4-pmu.h
> deleted file mode 100644
> index 278b1b1549e9..000000000000
> --- a/include/linux/mfd/syscon/exynos4-pmu.h
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -/*
> - * Copyright (C) 2015 Samsung Electronics Co., Ltd.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -
> -#ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_
> -#define _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_
> -
> -/* Exynos4 PMU register definitions */
> -
> -/* MIPI_PHYn_CONTROL register offset: n = 0..1 */
> -#define EXYNOS4_MIPI_PHY_CONTROL(n) (0x710 + (n) * 4)
> -#define EXYNOS4_MIPI_PHY_ENABLE (1 << 0)
> -#define EXYNOS4_MIPI_PHY_SRESETN (1 << 1)
> -#define EXYNOS4_MIPI_PHY_MRESETN (1 << 2)
> -#define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1)
> -
> -#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_ */
> diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
> index 0622ae86f9db..02af8dece914 100644
> --- a/include/linux/mfd/syscon/exynos5-pmu.h
> +++ b/include/linux/mfd/syscon/exynos5-pmu.h
> @@ -38,9 +38,6 @@
>
> /* Exynos5433 specific register definitions */
> #define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728)
> -#define EXYNOS5433_MIPI_PHY0_CONTROL (0x710)
> -#define EXYNOS5433_MIPI_PHY1_CONTROL (0x714)
> -#define EXYNOS5433_MIPI_PHY2_CONTROL (0x718)
>
> #define EXYNOS5_PHY_ENABLE BIT(0)
> #define EXYNOS5_MIPI_PHY_S_RESETN BIT(1)
> diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
> index 6a6529c96442..637ead0efd36 100644
> --- a/include/linux/soc/samsung/exynos-regs-pmu.h
> +++ b/include/linux/soc/samsung/exynos-regs-pmu.h
> @@ -1,5 +1,5 @@
> /*
> - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
> + * Copyright (c) 2010-2015 Samsung Electronics Co., Ltd.
> * http://www.samsung.com
> *
> * EXYNOS - Power management unit definition
> @@ -50,6 +50,13 @@
> #define S5P_WAKEUP_MASK 0x0608
> #define S5P_WAKEUP_MASK2 0x0614
>
> +/* MIPI_PHYn_CONTROL, valid for Exynos3250, Exynos4, Exynos5250 and Exynos5433 */
> +#define EXYNOS4_MIPI_PHY_CONTROL(n) (0x0710 + (n) * 4)
> +#define EXYNOS4_MIPI_PHY_ENABLE (1 << 0)
> +#define EXYNOS4_MIPI_PHY_SRESETN (1 << 1)
> +#define EXYNOS4_MIPI_PHY_MRESETN (1 << 2)
> +#define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1)
> +
> #define S5P_INFORM0 0x0800
> #define S5P_INFORM1 0x0804
> #define S5P_INFORM5 0x0814
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2017-02-08 11:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-27 20:05 [PATCH 0/4] phy/mfd/soc: exynos: Header cleanup Krzysztof Kozlowski
2017-01-27 20:05 ` [PATCH 1/4] phy: exynos4: Remove duplicated defines of PHY register defines Krzysztof Kozlowski
2017-02-08 11:58 ` Lee Jones [this message]
2017-01-27 20:05 ` [PATCH 2/4] phy: exynos5: " Krzysztof Kozlowski
2017-02-08 11:59 ` Lee Jones
2017-01-27 20:05 ` [PATCH 3/4] phy: exynos-mipi-video: Use consistent method to address phy registers Krzysztof Kozlowski
2017-01-27 20:05 ` [PATCH 4/4] phy: exynos: Use one define for enable bit Krzysztof Kozlowski
2017-02-08 11:59 ` Lee Jones
2017-01-30 9:13 ` [PATCH 0/4] phy/mfd/soc: exynos: Header cleanup Kishon Vijay Abraham I
2017-02-02 18:38 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170208115856.f6se6btiylv6usip@dell \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox