From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 13 Feb 2017 10:16:12 +0100 Subject: [PATCH 2/8] ARM: sun4i: Add display blocks for the sun4i dtsi. In-Reply-To: <20170211174405.28395-3-plaes@plaes.org> References: <20170211174405.28395-1-plaes@plaes.org> <20170211174405.28395-3-plaes@plaes.org> Message-ID: <20170213091612.d5ifc4oi63xf7boi@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Sat, Feb 11, 2017 at 07:43:59PM +0200, Priit Laes wrote: > Added basic display pipeline consisting of tcon, display backend and > frontend blocks. > > Signed-off-by: Priit Laes > --- > arch/arm/boot/dts/sun4i-a10.dtsi | 104 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 104 insertions(+) > > diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi > index ba20b48..70991c9 100644 > --- a/arch/arm/boot/dts/sun4i-a10.dtsi > +++ b/arch/arm/boot/dts/sun4i-a10.dtsi > @@ -779,6 +779,45 @@ > #size-cells = <0>; > }; > > + tcon0: lcd-controller at 1c0c000 { > + compatible = "allwinner,sun5i-a13-tcon"; There's a few bits here and there that need to be setup differently in A10, so you cannot reuse that compatible (same thing for the other). Also, I'd really like to have all the blocks listed here, and not only the first pipeline. Ideally, on the A10, the two pipelines should be enabled too. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: