From: afaerber@suse.de (Andreas Färber)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/11] ARM: Initial Actions Semi S500 and S900 enablement
Date: Wed, 15 Feb 2017 17:55:17 +0100 [thread overview]
Message-ID: <20170215165528.10052-1-afaerber@suse.de> (raw)
Hello,
Based on earlier work of mine for the LeMaker Guitar, this series adds initial
support for the Actions Semiconductor S500 (ARMv7) and S900 (ARMv8) SoCs.
Despite Actions Semi being a Linaro member since 2015, sadly I have not seen
a single upstream kernel patch submission since. Nor has the XApple community
taken any such initiative.
The GitHub LeMaker/linux-actions and xapp-le/kernel trees have 3.10 based S500
drivers in arch/arm/mach-owl/, whereas the 96boards-bubblegum/linux tree has
new-style but still 3.10 based S900 drivers. I also spotted GPLv2+ vs. GPLv2
license differences.
This series therefore provides a proof of concept for a combined S500 and S900
mainline implementation. Only earlycon serial output is available for now.
Focusing on Bubblegum-96, no S500 clocksource implementation is provided yet,
thus output on Guitar is less than on Bubblegum-96, but still it demonstrates
that a single driver can be shared for both, using compatible strings for
future differentiation.
https://github.com/afaerber/linux/commits/bg96-next
Booting from U-Boot is straightforward on both boards.
https://en.opensuse.org/HCL:Guitar
https://en.opensuse.org/HCL:Bubblegum-96
Have a lot of fun!
Cheers,
Andreas
Cc: mp-cs at actions-semi.com
Cc: info at ucrobotics.com
Cc: support at lemaker.org
Cc: contact at linux-xapple.org
Cc: devicetree at vger.kernel.org
Andreas F?rber (11):
Documentation: devicetree: Add vendor prefix for Actions Semi
Documentation: devicetree: arm: Document Actions Semi S500
ARM: Prepare Actions Semi S500
ARM64: Prepare Actions Semi S900
Documentation: devicetree: serial: Document Actions Semi Owl UARTs
tty: serial: Add Actions Semi Owl UART earlycon
Documentation: kernel-parameters: Document owl earlycon
ARM: dts: Prepare Actions Semi S500 and LeMaker Guitar
Documentation: devicetree: Add vendor prefix for uCRobotics
Documentation: devicetree: arm: Document Actions Semi S900
ARM64: dts: Prepare Actions Semi S900 and Bubblegum-96
Documentation/admin-guide/kernel-parameters.txt | 6 +
Documentation/devicetree/bindings/arm/acts.txt | 32 +++++
.../devicetree/bindings/serial/acts,owl-uart.txt | 16 +++
.../devicetree/bindings/vendor-prefixes.txt | 2 +
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/s500-guitar-bb-rev-b.dts | 63 ++++++++++
arch/arm/boot/dts/s500-guitar.dtsi | 49 ++++++++
arch/arm/boot/dts/s500.dtsi | 116 +++++++++++++++++
arch/arm/mach-owl/Kconfig | 9 ++
arch/arm/mach-owl/Makefile | 1 +
arch/arm/mach-owl/owl.c | 28 +++++
arch/arm64/Kconfig.platforms | 5 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/actions/Makefile | 5 +
arch/arm64/boot/dts/actions/s900-bubblegum96.dts | 62 +++++++++
arch/arm64/boot/dts/actions/s900.dtsi | 140 +++++++++++++++++++++
drivers/tty/serial/Kconfig | 19 +++
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/owl-uart.c | 135 ++++++++++++++++++++
21 files changed, 695 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/acts.txt
create mode 100644 Documentation/devicetree/bindings/serial/acts,owl-uart.txt
create mode 100644 arch/arm/boot/dts/s500-guitar-bb-rev-b.dts
create mode 100644 arch/arm/boot/dts/s500-guitar.dtsi
create mode 100644 arch/arm/boot/dts/s500.dtsi
create mode 100644 arch/arm/mach-owl/Kconfig
create mode 100644 arch/arm/mach-owl/Makefile
create mode 100644 arch/arm/mach-owl/owl.c
create mode 100644 arch/arm64/boot/dts/actions/Makefile
create mode 100644 arch/arm64/boot/dts/actions/s900-bubblegum96.dts
create mode 100644 arch/arm64/boot/dts/actions/s900.dtsi
create mode 100644 drivers/tty/serial/owl-uart.c
--
2.10.2
next reply other threads:[~2017-02-15 16:55 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-15 16:55 Andreas Färber [this message]
2017-02-15 16:55 ` [PATCH 01/11] Documentation: devicetree: Add vendor prefix for Actions Semi Andreas Färber
2017-02-15 16:55 ` [PATCH 02/11] Documentation: devicetree: arm: Document Actions Semi S500 Andreas Färber
2017-02-15 16:55 ` [PATCH 03/11] ARM: Prepare " Andreas Färber
2017-02-15 16:55 ` [PATCH 04/11] ARM64: Prepare Actions Semi S900 Andreas Färber
2017-02-16 13:43 ` Arnd Bergmann
2017-02-17 0:34 ` Andreas Färber
2017-02-17 11:32 ` Arnd Bergmann
2017-02-15 16:55 ` [PATCH 05/11] Documentation: devicetree: serial: Document Actions Semi Owl UARTs Andreas Färber
2017-02-15 16:55 ` [PATCH 06/11] tty: serial: Add Actions Semi Owl UART earlycon Andreas Färber
2017-02-16 13:41 ` Arnd Bergmann
2017-02-20 13:40 ` Andreas Färber
2017-02-20 15:17 ` Arnd Bergmann
2017-02-15 16:55 ` [PATCH 07/11] Documentation: kernel-parameters: Document owl earlycon Andreas Färber
2017-02-15 16:55 ` [PATCH 08/11] ARM: dts: Prepare Actions Semi S500 and LeMaker Guitar Andreas Färber
2017-02-15 17:07 ` Mark Rutland
2017-02-15 17:28 ` Andreas Färber
2017-02-15 17:36 ` Mark Rutland
2017-02-24 0:59 ` Andreas Färber
2017-02-15 16:55 ` [PATCH 09/11] Documentation: devicetree: Add vendor prefix for uCRobotics Andreas Färber
2017-02-15 16:55 ` [PATCH 10/11] Documentation: devicetree: arm: Document Actions Semi S900 Andreas Färber
2017-02-27 14:26 ` Rob Herring
2017-02-15 16:55 ` [PATCH 11/11] ARM64: dts: Prepare Actions Semi S900 and Bubblegum-96 Andreas Färber
2017-02-15 17:12 ` Mark Rutland
2017-02-15 18:14 ` Andreas Färber
2017-02-15 18:23 ` Mark Rutland
2017-02-16 13:46 ` [PATCH 00/11] ARM: Initial Actions Semi S500 and S900 enablement Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170215165528.10052-1-afaerber@suse.de \
--to=afaerber@suse.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox