linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: jszhang@marvell.com (Jisheng Zhang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next v3 1/4] net: mvneta: avoid getting status from rx_desc as much as possible
Date: Mon, 20 Feb 2017 20:53:41 +0800	[thread overview]
Message-ID: <20170220125344.3555-2-jszhang@marvell.com> (raw)
In-Reply-To: <20170220125344.3555-1-jszhang@marvell.com>

In hot code path mvneta_rx_hwbm(), the rx_desc->status is read twice.
The rx_desc is allocated by dma_alloc_coherent, it's uncacheable if
the device isn't cache-coherent, reading from uncached memory is
fairly slow. So reuse the read out rx_status to avoid the second
reading from uncached memory.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/net/ethernet/marvell/mvneta.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 61dd4462411c..06df72b8da85 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -313,8 +313,8 @@
 	((addr >= txq->tso_hdrs_phys) && \
 	 (addr < txq->tso_hdrs_phys + txq->size * TSO_HEADER_SIZE))
 
-#define MVNETA_RX_GET_BM_POOL_ID(rxd) \
-	(((rxd)->status & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT)
+#define MVNETA_RX_GET_BM_POOL_ID(status) \
+	(((status) & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT)
 
 struct mvneta_statistic {
 	unsigned short offset;
@@ -1900,7 +1900,7 @@ static void mvneta_rxq_drop_pkts(struct mvneta_port *pp,
 		for (i = 0; i < rx_done; i++) {
 			struct mvneta_rx_desc *rx_desc =
 						  mvneta_rxq_next_desc_get(rxq);
-			u8 pool_id = MVNETA_RX_GET_BM_POOL_ID(rx_desc);
+			u8 pool_id = MVNETA_RX_GET_BM_POOL_ID(rx_desc->status);
 			struct mvneta_bm_pool *bm_pool;
 
 			bm_pool = &pp->bm_priv->bm_pools[pool_id];
@@ -2075,7 +2075,7 @@ static int mvneta_rx_hwbm(struct mvneta_port *pp, int rx_todo,
 		rx_bytes = rx_desc->data_size - (ETH_FCS_LEN + MVNETA_MH_SIZE);
 		data = (u8 *)(uintptr_t)rx_desc->buf_cookie;
 		phys_addr = rx_desc->buf_phys_addr;
-		pool_id = MVNETA_RX_GET_BM_POOL_ID(rx_desc);
+		pool_id = MVNETA_RX_GET_BM_POOL_ID(rx_status);
 		bm_pool = &pp->bm_priv->bm_pools[pool_id];
 
 		if (!mvneta_rxq_desc_is_first_last(rx_status) ||
-- 
2.11.0

  reply	other threads:[~2017-02-20 12:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-20 12:53 [PATCH net-next v3 0/4] net: mvneta: improve rx/tx performance Jisheng Zhang
2017-02-20 12:53 ` Jisheng Zhang [this message]
2017-02-20 12:53 ` [PATCH net-next v3 2/4] net: mvneta: avoid getting buf_phys_addr from rx_desc again Jisheng Zhang
2017-02-20 12:53 ` [PATCH net-next v3 3/4] net: mvneta: avoid reading from tx_desc as much as possible Jisheng Zhang
2017-02-20 12:53 ` [PATCH net-next v3 4/4] net: mvneta: Use cacheable memory to store the rx buffer DMA address Jisheng Zhang
2017-02-20 14:21 ` [PATCH net-next v3 0/4] net: mvneta: improve rx/tx performance Gregory CLEMENT
2017-02-21  4:37   ` Jisheng Zhang
2017-02-21 16:16     ` David Miller
2017-02-21 16:35       ` Marcin Wojtas
2017-02-24 11:56       ` Jisheng Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170220125344.3555-2-jszhang@marvell.com \
    --to=jszhang@marvell.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).