From mboxrd@z Thu Jan 1 00:00:00 1970 From: cdall@linaro.org (Christoffer Dall) Date: Thu, 23 Feb 2017 11:14:07 +0100 Subject: [PATCH V2 2/2] KVM: arm64: Increase number of user memslots to 508 In-Reply-To: <1486538141-30627-3-git-send-email-linucherian@gmail.com> References: <1486538141-30627-1-git-send-email-linucherian@gmail.com> <1486538141-30627-3-git-send-email-linucherian@gmail.com> Message-ID: <20170223101407.GB1409@cbox> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Feb 08, 2017 at 12:45:41PM +0530, linucherian at gmail.com wrote: > From: Linu Cherian > > Having only 32 memslots is a real constraint for the maximum > number of PCI devices that can be assigned to a single guest. > Assuming each PCI device/virtual function having two memory BAR > regions, we could assign only 15 devices/virtual functions to a > guest. > > Hence increase KVM_USER_MEM_SLOTS to 508, so that KVM_MEM_SLOTS_NUM is > 512 as done in other archs like x86 and powerpc. Actually on powerpc they just define KVM_USER_MEM_SLOTS as 512 directly. On x86 they define them as 509 and have 3 private mem slots. I don't understand the difference and as far as I can tell we don't have any private memslots on arm/arm64, so this is just weird to me. Thanks, -Christoffer > > Signed-off-by: Linu Cherian > --- > arch/arm64/include/asm/kvm_host.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h > index e505038..88f017d 100644 > --- a/arch/arm64/include/asm/kvm_host.h > +++ b/arch/arm64/include/asm/kvm_host.h > @@ -30,7 +30,7 @@ > > #define __KVM_HAVE_ARCH_INTC_INITIALIZED > > -#define KVM_USER_MEM_SLOTS 32 > +#define KVM_USER_MEM_SLOTS 508 > #define KVM_PRIVATE_MEM_SLOTS 4 > #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 > #define KVM_HALT_POLL_NS_DEFAULT 500000 > -- > 1.9.1 >