From: thierry.reding@gmail.com (Thierry Reding)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/11] arm64: tegra: Enable SDHCI controllers on P3110
Date: Thu, 23 Feb 2017 18:30:49 +0100 [thread overview]
Message-ID: <20170223173053.19701-7-thierry.reding@gmail.com> (raw)
In-Reply-To: <20170223173053.19701-1-thierry.reding@gmail.com>
From: Thierry Reding <treding@nvidia.com>
The P3110 processor module wires one of the SDHCI controllers to an on-
board eMMC and exposes another set of SD/MMC signals on the connector to
support an external SD/MMC card. A third controller is connected to the
SDIO pins of an M.2 KEY E connector.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 42 ++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 1a9ac73b4ecb..b18e166527d8 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -7,6 +7,8 @@
compatible = "nvidia,p3310", "nvidia,tegra186";
aliases {
+ sdhci0 = "/sdhci at 3460000";
+ sdhci1 = "/sdhci at 3400000";
serial0 = &uarta;
i2c0 = "/bpmp/i2c";
i2c1 = "/i2c at 3160000";
@@ -72,6 +74,32 @@
status = "okay";
};
+ /* SDMMC1 (SD/MMC) */
+ sdhci at 3400000 {
+ status = "okay";
+
+ cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+
+ vqmmc-supply = <&vddio_sdmmc1>;
+ vmmc-supply = <&vdd_sd>;
+ };
+
+ /* SDMMC3 (SDIO) */
+ sdhci at 3440000 {
+ status = "okay";
+ };
+
+ /* SDMMC4 (eMMC) */
+ sdhci at 3460000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ vqmmc-supply = <&vdd_1v8_ap>;
+ vmmc-supply = <&vdd_3v3_sys>;
+ };
+
hsp at 3c00000 {
status = "okay";
};
@@ -333,5 +361,19 @@
vin-supply = <&vdd_1v8>;
};
+
+ vdd_sd: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+
+ regulator-name = "SD_CARD_SW_PWR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vdd_3v3_sys>;
+ };
};
};
--
2.11.1
next prev parent reply other threads:[~2017-02-23 17:30 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-23 17:30 [PATCH 01/11] arm64: tegra: Add PMC controller on Tegra186 Thierry Reding
2017-02-23 17:30 ` [PATCH 02/11] arm64: tegra: Add ethernet support for Tegra186 Thierry Reding
2017-03-07 20:42 ` Jon Hunter
2017-02-23 17:30 ` [PATCH 03/11] arm64: tegra: Invert the PMC interrupt on P3310 Thierry Reding
2017-03-07 10:25 ` Jon Hunter
2017-02-23 17:30 ` [PATCH 04/11] arm64: tegra: Enable I2C controllers " Thierry Reding
2017-03-07 10:38 ` Jon Hunter
2017-02-23 17:30 ` [PATCH 05/11] arm64: tegra: Enable ethernet " Thierry Reding
2017-03-07 21:04 ` Jon Hunter
2017-02-23 17:30 ` [PATCH 06/11] arm64: tegra: Add initial power tree for P3310 Thierry Reding
2017-03-08 11:18 ` Jon Hunter
2017-03-08 13:24 ` [PATCH v2] " Thierry Reding
2017-03-08 14:24 ` Jon Hunter
2017-02-23 17:30 ` Thierry Reding [this message]
2017-03-08 11:46 ` [PATCH 07/11] arm64: tegra: Enable SDHCI controllers on P3110 Jon Hunter
2017-03-08 13:18 ` Thierry Reding
2017-03-08 13:39 ` [PATCH v2 1/2] " Thierry Reding
2017-03-08 13:39 ` [PATCH v2 2/2] arm64: tegra: Enable SD/MMC slot on P2771 Thierry Reding
2017-03-08 14:26 ` Jon Hunter
2017-03-08 14:26 ` [PATCH v2 1/2] arm64: tegra: Enable SDHCI controllers on P3110 Jon Hunter
2017-02-23 17:30 ` [PATCH 08/11] arm64: tegra: Enable current monitors on P3310 Thierry Reding
2017-03-08 11:52 ` Jon Hunter
2017-02-23 17:30 ` [PATCH 09/11] arm64: tegra: Add GPIO keys on P2771 Thierry Reding
2017-03-08 12:03 ` Jon Hunter
2017-03-08 12:15 ` Jon Hunter
2017-03-08 13:47 ` Thierry Reding
2017-02-23 17:30 ` [PATCH 10/11] arm64: tegra: Add power monitors " Thierry Reding
2017-03-08 12:06 ` Jon Hunter
2017-02-23 17:30 ` [PATCH 11/11] arm64: tegra: Add GPIO expanders " Thierry Reding
2017-03-08 12:11 ` Jon Hunter
2017-03-07 9:48 ` [PATCH 01/11] arm64: tegra: Add PMC controller on Tegra186 Jon Hunter
2017-03-08 18:29 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170223173053.19701-7-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).