From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric@anholt.net (Eric Anholt) Date: Mon, 27 Feb 2017 12:28:01 -0800 Subject: [PATCH v2 1/3] dt-bindings: Document the dmas and dma-names properties for VC4 HDMI Message-ID: <20170227202803.12855-1-eric@anholt.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Boris Brezillon These are optional, but necessary for HDMI audio support. Signed-off-by: Boris Brezillon Signed-off-by: Eric Anholt Acked-by: Rob Herring --- v2: no changes Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt index 34c7fddcea39..ca02d3e4db91 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -34,6 +34,9 @@ Optional properties for HDMI: - hpd-gpios: The GPIO pin for HDMI hotplug detect (if it doesn't appear as an interrupt/status bit in the HDMI controller itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt +- dmas: Should contain one entry pointing to the DMA channel used to + transfer audio data +- dma-names: Should contain "audio-rx" Required properties for DPI: - compatible: Should be "brcm,bcm2835-dpi" -- 2.11.0