From: pali.rohar@gmail.com (Pali Rohár)
To: linux-arm-kernel@lists.infradead.org
Subject: Microphone gain on N900
Date: Mon, 27 Feb 2017 20:53:37 +0100 [thread overview]
Message-ID: <201702272053.37882@pali> (raw)
In-Reply-To: <20170226202831.GA31405@amd>
On Sunday 26 February 2017 21:28:32 Pavel Machek wrote:
> Hi!
>
> v4.10 works quite nicely on N900, but I still have problems with
> audio. Even GSM calls would be usable, if I had reasonable volume on
> microphone and speaker... but I don't.
>
> Both speaker and microphone are too quiet. I can get louder output by
> plugging headset -- good. I can hear the other side nicely, but am
> too quiet for them. Unfortunately, even if I plug in wired headset,
> internal microphone is still used.
>
> Now... I researched mixer settings in v4.4, v4.10 and v2.6.28... and
> could not find way to control microphone. v2.6.28 is completely
> different from the other two. v4.10 misses many controls from v4.4;
> and I guess this might be related:
>
> [ 2.579925] rx51-audio n900-audio: tlv320aic3x-hifi <->
> 49022000.mcbsp mapping ok
> [ 2.586486] rx51-audio n900-audio: ASoC: no source widget found
> for TPA6130A2 HPLEFT
> [ 2.592651] rx51-audio n900-audio: ASoC: Failed to add route
> TPA6130A2 HPLEFT -> direct -> Headphone Jack
> [ 2.605163] rx51-audio n900-audio: ASoC: no source widget found
> for TPA6130A2 HPRIGHT
> [ 2.611938] rx51-audio n900-audio: ASoC: Failed to add route
> TPA6130A2 HPRIGHT -> direct -> Headphone Jack
> [ 2.625701] rx51-audio n900-audio: ASoC: no sink widget found for
> TPA6130A2 LEFTIN
> [ 2.632965] rx51-audio n900-audio: ASoC: Failed to add route LLOUT
> -> direct -> TPA6130A2 LEFTIN
> [ 2.640563] rx51-audio n900-audio: ASoC: no sink widget found for
> TPA6130A2 RIGHTIN
> [ 2.648101] rx51-audio n900-audio: ASoC: Failed to add route RLOUT
> -> direct -> TPA6130A2 RIGHTIN
> [ 2.655761] rx51-audio n900-audio: ASoC: no sink widget found for
> b LINE2R
> [ 2.663208] rx51-audio n900-audio: ASoC: Failed to add route
> MONO_LOUT -> direct -> b LINE2R
> [ 2.670501] rx51-audio n900-audio: ASoC: no source widget found
> for b HPLOUT
> [ 2.677642] rx51-audio n900-audio: ASoC: Failed to add route b
> HPLOUT -> direct -> Earphone
> [ 2.685058] rx51-audio n900-audio: ASoC: no source widget found
> for b Mic Bias
> [ 2.692352] rx51-audio n900-audio: ASoC: Failed to add route b Mic
> Bias -> direct -> HS Mic
> [ 2.706298] input: RX-51 AV Jack as
> /devices/platform/n900-audio/sound/card0/input6
Jarkko, Peter: can you look at above errors? Looks like audio routing is
not correctly configured.
> Pali, do you have maemo running on top of recent kernel (v4.1, v4.4,
> v4.10?). Do voice calls work there?
Now I do not have prepared Maemo + mainline kernel for testing...
I remember that Maemo sscd/csd/... daemons were able to connect to
cellular network but I was not trying to make voice calls.
> Any ideas welcome...
>
> Best regards,
> Pavel
--
Pali Roh?r
pali.rohar at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170227/2bfc4c0d/attachment.sig>
next prev parent reply other threads:[~2017-02-27 19:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-26 20:28 Microphone gain on N900 Pavel Machek
2017-02-27 19:53 ` Pali Rohár [this message]
2017-02-28 18:45 ` Jarkko Nikula
2017-03-02 14:28 ` Pavel Machek
2017-03-04 16:01 ` Jarkko Nikula
2017-04-17 20:34 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201702272053.37882@pali \
--to=pali.rohar@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).