[PATCH DO NOT MERGE 5/6] ARM: dts: omap4: add some sample clkctrl data

[sboyd@codeaurora.org (Stephen Boyd)]

On 02/13, Tero Kristo wrote:
> Adds clkctrl nodes for cm_l4per and cm_abe as example. Peripherals using
> @@ -131,27 +132,61 @@
>  			ranges = <0 0x4a000000 0x1000000>;
>  
>  			cm1: cm1 at 4000 {
> -				compatible = "ti,omap4-cm1";
> +				compatible = "ti,omap4-cm1", "simple-bus";
>  				reg = <0x4000 0x2000>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0 0x4000 0x2000>;
>  
>  				cm1_clocks: clocks {
>  					#address-cells = <1>;
>  					#size-cells = <0>;
>  				};
>  
> +				cm_abe: cm_abe at 0 {

The unit address should be 500 here.

> +					compatible = "ti,omap4-cm";
> +					reg = <0x500 0x100>;
> +					#address-cells = <1>;
> +					#size-cells = <1>;
> +					ranges = <0 0x500 0x100>;
> +
> +					cm_abe_clkctrl: cm_abe_clkctrl at 20 {
> +						compatible = "ti,omap4-clkctrl";
> +						reg = <0x20 0x6c>;
> +						#clock-cells = <2>;
> +					};
> +				};
> +
>  				cm1_clockdomains: clockdomains {
>  				};
>  			};
>  
>  			cm2: cm2 at 8000 {
> -				compatible = "ti,omap4-cm2";
> +				compatible = "ti,omap4-cm2", "simple-bus";
>  				reg = <0x8000 0x3000>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0 0x8000 0x3000>;
>  
>  				cm2_clocks: clocks {
>  					#address-cells = <1>;
>  					#size-cells = <0>;
>  				};
>  
> +				cm_l4per: cm_l4per at 0 {

and 1400 here.

> +					compatible = "ti,omap4-cm";
> +					reg = <0x1400 0x200>;
> +					#address-cells = <1>;
> +					#size-cells = <1>;
> +					ranges = <0 0x1400 0x200>;
> +
> +					cm_l4per_clkctrl: cm_l4per_clkctrl at 20 {

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project