From: briannorris@chromium.org (Brian Norris)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] phy: rockchip-typec: support DP phy switch
Date: Wed, 8 Mar 2017 16:39:23 -0800 [thread overview]
Message-ID: <20170309003921.GA101174@google.com> (raw)
In-Reply-To: <1486712654-15431-4-git-send-email-zyw@rock-chips.com>
On Fri, Feb 10, 2017 at 03:44:13PM +0800, Chris Zhong wrote:
> There are 2 Type-c PHYs in RK3399, but only one DP controller. Hence
> only one PHY can connect to DP controller at one time, the other should
> be disconnected. The GRF_SOC_CON26 register has a switch bit to do it,
> set this bit means enable PHY 1, clear this bit means enable PHY 0.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> ---
>
> drivers/phy/phy-rockchip-typec.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
> index 7cfb0f8..1604aaa 100644
> --- a/drivers/phy/phy-rockchip-typec.c
> +++ b/drivers/phy/phy-rockchip-typec.c
> @@ -267,6 +267,7 @@ struct rockchip_usb3phy_port_cfg {
> struct usb3phy_reg usb3tousb2_en;
> struct usb3phy_reg external_psm;
> struct usb3phy_reg pipe_status;
> + struct usb3phy_reg uphy_dp_sel;
> };
>
> struct rockchip_typec_phy {
> @@ -736,6 +737,7 @@ static const struct phy_ops rockchip_usb3_phy_ops = {
> static int rockchip_dp_phy_power_on(struct phy *phy)
> {
> struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
> + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
> int new_mode, ret = 0;
> u32 val;
>
> @@ -766,6 +768,8 @@ static int rockchip_dp_phy_power_on(struct phy *phy)
> tcphy_phy_init(tcphy, new_mode);
> }
>
> + property_enable(tcphy, &cfg->uphy_dp_sel, 1);
> +
> ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
Idea for future work: this should just be readl_poll_timeout() here, and
throughout the driver.
> val, val & DP_MODE_A2, 1000,
> PHY_MODE_SET_TIMEOUT);
> @@ -869,6 +873,11 @@ static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
> if (ret)
> return ret;
>
> + ret = tcphy_get_param(dev, &cfg->uphy_dp_sel,
> + "rockchip,uphy-dp-sel");
> + if (ret)
> + return ret;
What about existing device trees? You're essentially adding this
new property and requiring it at the same time.
Or are we considering no RK3399 DP stable at the moment? I guess we
haven't actually merged any device trees that support this yet, no?
Brian
> +
> tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
> "rockchip,grf");
> if (IS_ERR(tcphy->grf_regs)) {
> --
> 2.6.3
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2017-03-09 0:39 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-10 7:44 [PATCH 0/4] Move DP phy switch to PHY driver Chris Zhong
2017-02-10 7:44 ` [PATCH 1/4] Documentation: bindings: add uphy-dp-sel for Rockchip USB Type-C PHY Chris Zhong
2017-02-16 2:20 ` Rob Herring
2017-02-16 3:14 ` Chris Zhong
2017-02-10 7:44 ` [PATCH 2/4] arm64: dts: rockchip: add rockchip, uphy-dp-sel for Type-C phy Chris Zhong
2017-02-10 7:44 ` [PATCH 3/4] phy: rockchip-typec: support DP phy switch Chris Zhong
2017-03-09 0:39 ` Brian Norris [this message]
2017-03-09 1:02 ` Heiko Stübner
2017-03-09 2:19 ` Chris Zhong
2017-03-09 3:10 ` Brian Norris
2017-03-09 8:31 ` Heiko Stübner
2017-03-09 23:35 ` Brian Norris
2017-02-10 7:44 ` [PATCH 4/4] drm/rockchip: cdn-dp: remove the " Chris Zhong
2017-11-28 23:32 ` [PATCH 0/4] Move DP phy switch to PHY driver Doug Anderson
2017-11-30 2:27 ` Chris Zhong
2017-12-01 21:42 ` Doug Anderson
2017-12-01 21:58 ` Heiko Stuebner
2017-12-04 2:47 ` Chris Zhong
2017-12-04 7:46 ` Heiko Stübner
2017-12-04 16:08 ` Doug Anderson
2017-12-04 21:53 ` Heiko Stübner
2018-02-16 11:04 ` Kishon Vijay Abraham I
2018-02-16 13:05 ` Heiko Stübner
2018-02-16 13:59 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170309003921.GA101174@google.com \
--to=briannorris@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).