From: gmbnomis@gmail.com (Simon Baatz)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mtd: nand: orion: fix clk handling
Date: Sun, 12 Mar 2017 22:34:06 +0100 [thread overview]
Message-ID: <20170312213406.20987-1-gmbnomis@gmail.com> (raw)
The clk handling in orion_nand.c had two problems:
- In the probe function, clk_put() was called for an enabled clock,
which violates the API (see documentation for clk_put() in
include/linux/clk.h)
- In the error path of the probe function, clk_put() could be called
twice for the same clock.
In order to clean this up, use the managed function devm_clk_get() and
store the pointer to the clk in the driver data.
Fixes: baffab28b13120694fa3ebab08d3e99667a851d2 ('ARM: Orion: fix driver probe error handling with respect to clk')
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
---
drivers/mtd/nand/orion_nand.c | 42 +++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 4a91c5d000be..b355aa738fae 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -23,6 +23,11 @@
#include <asm/sizes.h>
#include <linux/platform_data/mtd-orion_nand.h>
+struct orion_nand_info {
+ struct nand_chip chip;
+ struct clk *clk;
+};
+
static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *nc = mtd_to_nand(mtd);
@@ -75,20 +80,21 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
static int __init orion_nand_probe(struct platform_device *pdev)
{
+ struct orion_nand_info *info;
struct mtd_info *mtd;
struct nand_chip *nc;
struct orion_nand_data *board;
struct resource *res;
- struct clk *clk;
void __iomem *io_base;
int ret = 0;
u32 val = 0;
- nc = devm_kzalloc(&pdev->dev,
- sizeof(struct nand_chip),
+ info = devm_kzalloc(&pdev->dev,
+ sizeof(struct orion_nand_info),
GFP_KERNEL);
- if (!nc)
+ if (!info)
return -ENOMEM;
+ nc = &info->chip;
mtd = nand_to_mtd(nc);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -145,15 +151,13 @@ static int __init orion_nand_probe(struct platform_device *pdev)
if (board->dev_ready)
nc->dev_ready = board->dev_ready;
- platform_set_drvdata(pdev, mtd);
+ platform_set_drvdata(pdev, info);
/* Not all platforms can gate the clock, so it is not
an error if the clock does not exists. */
- clk = clk_get(&pdev->dev, NULL);
- if (!IS_ERR(clk)) {
- clk_prepare_enable(clk);
- clk_put(clk);
- }
+ info->clk = devm_clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(info->clk))
+ clk_prepare_enable(info->clk);
ret = nand_scan(mtd, 1);
if (ret)
@@ -169,26 +173,22 @@ static int __init orion_nand_probe(struct platform_device *pdev)
return 0;
no_dev:
- if (!IS_ERR(clk)) {
- clk_disable_unprepare(clk);
- clk_put(clk);
- }
+ if (!IS_ERR(info->clk))
+ clk_disable_unprepare(info->clk);
return ret;
}
static int orion_nand_remove(struct platform_device *pdev)
{
- struct mtd_info *mtd = platform_get_drvdata(pdev);
- struct clk *clk;
+ struct orion_nand_info *info = platform_get_drvdata(pdev);
+ struct nand_chip *chip = &info->chip;
+ struct mtd_info *mtd = nand_to_mtd(chip);
nand_release(mtd);
- clk = clk_get(&pdev->dev, NULL);
- if (!IS_ERR(clk)) {
- clk_disable_unprepare(clk);
- clk_put(clk);
- }
+ if (!IS_ERR(info->clk))
+ clk_disable_unprepare(info->clk);
return 0;
}
--
2.9.3
next reply other threads:[~2017-03-12 21:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-12 21:34 Simon Baatz [this message]
2017-03-13 7:12 ` [PATCH] mtd: nand: orion: fix clk handling Uwe Kleine-König
2017-03-13 20:43 ` Simon Baatz
2017-03-13 20:58 ` Uwe Kleine-König
2017-03-16 9:12 ` Boris Brezillon
2017-03-16 21:50 ` Simon Baatz
2017-03-17 6:36 ` Boris Brezillon
2017-03-16 9:05 ` Boris Brezillon
2017-03-16 21:44 ` Simon Baatz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170312213406.20987-1-gmbnomis@gmail.com \
--to=gmbnomis@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).