From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawnguo@kernel.org (Shawn Guo) Date: Tue, 14 Mar 2017 15:28:48 +0800 Subject: [PATCH] ARM: dts: imx6q-bx50v3/imx6q-b450v3/imx6q-b650v3: fix at25 spi-clk frequency issue In-Reply-To: <20170303212032.31725-1-yungching0725@gmail.com> References: <20170303212032.31725-1-yungching0725@gmail.com> Message-ID: <20170314072846.GJ3618@dragon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sat, Mar 04, 2017 at 05:20:32AM +0800, Ken Lin wrote: > Change the maxium spi clock frequency from 20MHz to 10MHz to meet the operation voltage range requirement recommended in AT25 datasheet The commit log should be wrapped around column 72 to make it easier for read. The subject prefix is unnecessarily too long, as it only changes imx6q-bx50v3.dtsi. I fixed them this time, and apply the patch. Shawn > > Signed-off-by: Ken Lin > --- > arch/arm/boot/dts/imx6q-bx50v3.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi > index f99e6efda3e2..614c40e5f772 100644 > --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi > +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi > @@ -103,7 +103,7 @@ > > m25_eeprom: m25p80 at 0 { > compatible = "atmel,at25"; > - spi-max-frequency = <20000000>; > + spi-max-frequency = <10000000>; > size = <0x8000>; > pagesize = <64>; > reg = <0>; > -- > 2.11.0 >