[PATCH v4 0/5] phy/mfd/soc: exynos: Header cleanup

[PATCH v4 0/5] phy/mfd/soc: exynos: Header cleanup

[Krzysztof Kozlowski]

Suggested by Marek, continuation of cleanup of PMU register defines
in headers.
Let's keep all of them in include/linux/soc/samsung/exynos-regs-pmu.h.

Everything is bisectable but should go in through one tree.
It can go through phy tree - in that case 4/5 (added in v3) needs Lee's
ack. For the rest - samsung-soc ack is given by me.
I can also take it through samsung-soc - please let me know.

Changes since v3:
=================
1. Minor adjust of commit msg in patch 2/5 (suggested by Bartlomiej).
2. Add Bartlomiej's reviews.

Changes since v2:
=================
1. Rebase wasn't done properly (and MFD Exynos LPASS is not build by exynos
   defconfig) so Kbuild test robot reported issue. New patch 4/5.

Changes since v1:
=================
1. Rebase - dependencies should be already in.
2. Add Lee's acks.


Best regards,
Krzysztof


Krzysztof Kozlowski (5):
  phy: exynos4: Remove duplicated defines of PHY register defines
  phy: exynos5: Remove duplicated defines of PHY register defines
  phy: exynos-mipi-video: Use consistent method to address phy registers
  mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header
  phy: exynos: Use one define for enable bit

 drivers/mfd/exynos-lpass.c                  |  4 +-
 drivers/phy/phy-exynos-dp-video.c           |  6 +--
 drivers/phy/phy-exynos-mipi-video.c         | 71 ++++++++++++++---------------
 drivers/phy/phy-exynos5-usbdrd.c            |  6 +--
 include/linux/mfd/syscon/exynos4-pmu.h      | 21 ---------
 include/linux/mfd/syscon/exynos5-pmu.h      | 52 ---------------------
 include/linux/soc/samsung/exynos-regs-pmu.h | 16 ++++++-
 7 files changed, 58 insertions(+), 118 deletions(-)
 delete mode 100644 include/linux/mfd/syscon/exynos4-pmu.h
 delete mode 100644 include/linux/mfd/syscon/exynos5-pmu.h

-- 
2.9.3

[PATCH v4 1/5] phy: exynos4: Remove duplicated defines of PHY register defines

[Krzysztof Kozlowski]

Phy drivers access PMU region through regmap provided by exynos-pmu
driver.   However there is no need to duplicate defines for PMU
registers.  Instead just use whatever is defined in exynos-regs-pmu.h.

Additionally MIPI PHY registers for Exynos5433 start from the same
address as Exynos4 and Exynos5250 so re-use existing defines.

This reduces number of defines and allows removal of one header file.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/phy/phy-exynos-mipi-video.c         | 12 ++++++------
 include/linux/mfd/syscon/exynos4-pmu.h      | 21 ---------------------
 include/linux/mfd/syscon/exynos5-pmu.h      |  3 ---
 include/linux/soc/samsung/exynos-regs-pmu.h |  9 ++++++++-
 4 files changed, 14 insertions(+), 31 deletions(-)
 delete mode 100644 include/linux/mfd/syscon/exynos4-pmu.h

diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index 6bee04cc4d53..d7fe1f8c3ac8 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -12,7 +12,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/mfd/syscon/exynos4-pmu.h>
 #include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -21,6 +20,7 @@
 #include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 #include <linux/mfd/syscon.h>
 
 enum exynos_mipi_phy_id {
@@ -173,7 +173,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(0),
 			.resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
@@ -182,7 +182,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(0),
 			.resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
@@ -191,7 +191,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(1),
 			.resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
@@ -200,7 +200,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(1),
 			.resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
@@ -209,7 +209,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5433_MIPI_PHY2_CONTROL,
+			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(0),
 			.resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON,
diff --git a/include/linux/mfd/syscon/exynos4-pmu.h b/include/linux/mfd/syscon/exynos4-pmu.h
deleted file mode 100644
index 278b1b1549e9..000000000000
--- a/include/linux/mfd/syscon/exynos4-pmu.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2015 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_
-#define _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_
-
-/* Exynos4 PMU register definitions */
-
-/* MIPI_PHYn_CONTROL register offset: n = 0..1 */
-#define EXYNOS4_MIPI_PHY_CONTROL(n)	(0x710 + (n) * 4)
-#define EXYNOS4_MIPI_PHY_ENABLE		(1 << 0)
-#define EXYNOS4_MIPI_PHY_SRESETN	(1 << 1)
-#define EXYNOS4_MIPI_PHY_MRESETN	(1 << 2)
-#define EXYNOS4_MIPI_PHY_RESET_MASK	(3 << 1)
-
-#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS4_H_ */
diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
index c28ff21ca4d2..77c93551ee58 100644
--- a/include/linux/mfd/syscon/exynos5-pmu.h
+++ b/include/linux/mfd/syscon/exynos5-pmu.h
@@ -38,9 +38,6 @@
 
 /* Exynos5433 specific register definitions */
 #define EXYNOS5433_USBHOST30_PHY_CONTROL	(0x728)
-#define EXYNOS5433_MIPI_PHY0_CONTROL		(0x710)
-#define EXYNOS5433_MIPI_PHY1_CONTROL		(0x714)
-#define EXYNOS5433_MIPI_PHY2_CONTROL		(0x718)
 
 #define EXYNOS5_PHY_ENABLE			BIT(0)
 #define EXYNOS5_MIPI_PHY_S_RESETN		BIT(1)
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index 49df0a01a2cc..e57d75889a09 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2015 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
  * EXYNOS - Power management unit definition
@@ -50,6 +50,13 @@
 #define S5P_WAKEUP_MASK				0x0608
 #define S5P_WAKEUP_MASK2				0x0614
 
+/* MIPI_PHYn_CONTROL, valid for Exynos3250, Exynos4, Exynos5250 and Exynos5433 */
+#define EXYNOS4_MIPI_PHY_CONTROL(n)		(0x0710 + (n) * 4)
+#define EXYNOS4_MIPI_PHY_ENABLE			(1 << 0)
+#define EXYNOS4_MIPI_PHY_SRESETN		(1 << 1)
+#define EXYNOS4_MIPI_PHY_MRESETN		(1 << 2)
+#define EXYNOS4_MIPI_PHY_RESET_MASK		(3 << 1)
+
 #define S5P_INFORM0				0x0800
 #define S5P_INFORM1				0x0804
 #define S5P_INFORM5				0x0814
-- 
2.9.3

[PATCH v4 2/5] phy: exynos5: Remove duplicated defines of PHY register defines

[Krzysztof Kozlowski]

Phy drivers access PMU region through regmap provided by exynos-pmu
driver.   However there is no need to duplicate defines for PMU
registers.  Instead just use whatever is defined in exynos-regs-pmu.h.

This reduces number of defines.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/phy/phy-exynos-dp-video.c           |  1 +
 drivers/phy/phy-exynos5-usbdrd.c            |  1 +
 include/linux/mfd/syscon/exynos5-pmu.h      | 27 ---------------------------
 include/linux/soc/samsung/exynos-regs-pmu.h |  8 ++++++++
 4 files changed, 10 insertions(+), 27 deletions(-)

diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
index 34b06154e5d9..d72193188980 100644
--- a/drivers/phy/phy-exynos-dp-video.c
+++ b/drivers/phy/phy-exynos-dp-video.c
@@ -20,6 +20,7 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 
 struct exynos_dp_video_phy_drvdata {
 	u32 phy_ctrl_offset;
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
index 07ed608905ac..7c896d0cda18 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/phy-exynos5-usbdrd.c
@@ -25,6 +25,7 @@
 #include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 
 /* Exynos USB PHY registers */
 #define EXYNOS5_FSEL_9MHZ6		0x0
diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
index 77c93551ee58..0a4ddabc395e 100644
--- a/include/linux/mfd/syscon/exynos5-pmu.h
+++ b/include/linux/mfd/syscon/exynos5-pmu.h
@@ -12,33 +12,6 @@
 #ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_
 #define _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_
 
-/* Exynos5 PMU register definitions */
-#define EXYNOS5_HDMI_PHY_CONTROL		(0x700)
-#define EXYNOS5_USBDRD_PHY_CONTROL		(0x704)
-
-/* Exynos5250 specific register definitions */
-#define EXYNOS5_USBHOST_PHY_CONTROL		(0x708)
-#define EXYNOS5_EFNAND_PHY_CONTROL		(0x70c)
-#define EXYNOS5_MIPI_PHY0_CONTROL		(0x710)
-#define EXYNOS5_MIPI_PHY1_CONTROL		(0x714)
-#define EXYNOS5_ADC_PHY_CONTROL			(0x718)
-#define EXYNOS5_MTCADC_PHY_CONTROL		(0x71c)
-#define EXYNOS5_DPTX_PHY_CONTROL		(0x720)
-#define EXYNOS5_SATA_PHY_CONTROL		(0x724)
-
-/* Exynos5420 specific register definitions */
-#define EXYNOS5420_USBDRD1_PHY_CONTROL		(0x708)
-#define EXYNOS5420_USBHOST_PHY_CONTROL		(0x70c)
-#define EXYNOS5420_MIPI_PHY0_CONTROL		(0x714)
-#define EXYNOS5420_MIPI_PHY1_CONTROL		(0x718)
-#define EXYNOS5420_MIPI_PHY2_CONTROL		(0x71c)
-#define EXYNOS5420_ADC_PHY_CONTROL		(0x720)
-#define EXYNOS5420_MTCADC_PHY_CONTROL		(0x724)
-#define EXYNOS5420_DPTX_PHY_CONTROL		(0x728)
-
-/* Exynos5433 specific register definitions */
-#define EXYNOS5433_USBHOST30_PHY_CONTROL	(0x728)
-
 #define EXYNOS5_PHY_ENABLE			BIT(0)
 #define EXYNOS5_MIPI_PHY_S_RESETN		BIT(1)
 #define EXYNOS5_MIPI_PHY_M_RESETN		BIT(2)
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index e57d75889a09..4ee54b3fcd57 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -349,6 +349,8 @@
 
 #define EXYNOS5_AUTO_WDTRESET_DISABLE				0x0408
 #define EXYNOS5_MASK_WDTRESET_REQUEST				0x040C
+#define EXYNOS5_USBDRD_PHY_CONTROL				0x0704
+#define EXYNOS5_DPTX_PHY_CONTROL				0x0720
 
 #define EXYNOS5_USE_RETENTION			BIT(4)
 #define EXYNOS5_SYS_WDTRESET					(1 << 20)
@@ -502,6 +504,11 @@
 #define EXYNOS5420_KFC_CORE_RESET(_nr)				\
 	((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
 
+#define EXYNOS5420_USBDRD1_PHY_CONTROL				0x0708
+#define EXYNOS5420_MIPI_PHY0_CONTROL				0x0714
+#define EXYNOS5420_MIPI_PHY1_CONTROL				0x0718
+#define EXYNOS5420_MIPI_PHY2_CONTROL				0x071C
+#define EXYNOS5420_DPTX_PHY_CONTROL				0x0728
 #define EXYNOS5420_ARM_CORE2_SYS_PWR_REG			0x1020
 #define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG		0x1024
 #define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG	0x1028
@@ -639,6 +646,7 @@
 					 | EXYNOS5420_KFC_USE_STANDBY_WFI3)
 
 /* For EXYNOS5433 */
+#define EXYNOS5433_USBHOST30_PHY_CONTROL			(0x0728)
 #define EXYNOS5433_PAD_RETENTION_AUD_OPTION			(0x3028)
 #define EXYNOS5433_PAD_RETENTION_MMC2_OPTION			(0x30C8)
 #define EXYNOS5433_PAD_RETENTION_TOP_OPTION			(0x3108)
-- 
2.9.3

[PATCH v4 3/5] phy: exynos-mipi-video: Use consistent method to address phy registers

[Krzysztof Kozlowski]

Exynos4 MIPI phy registers are defined with macro calculating the offset
for given phyN.  Use the same method for Exynos5420 to be consistent.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/phy/phy-exynos-mipi-video.c         | 20 ++++++++++----------
 include/linux/soc/samsung/exynos-regs-pmu.h |  4 +---
 2 files changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index d7fe1f8c3ac8..acef1d92691e 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -110,46 +110,46 @@ static const struct mipi_phy_device_desc exynos5420_mipi_phy = {
 			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
-			.resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
-			.resetn_reg = EXYNOS5420_MIPI_PHY0_CONTROL,
+			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
-			.resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
-			.resetn_reg = EXYNOS5420_MIPI_PHY1_CONTROL,
+			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
 			.enable_val = EXYNOS5_PHY_ENABLE,
-			.enable_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
-			.resetn_reg = EXYNOS5420_MIPI_PHY2_CONTROL,
+			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		},
 	},
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index 4ee54b3fcd57..c261ed927e1e 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -505,9 +505,7 @@
 	((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
 
 #define EXYNOS5420_USBDRD1_PHY_CONTROL				0x0708
-#define EXYNOS5420_MIPI_PHY0_CONTROL				0x0714
-#define EXYNOS5420_MIPI_PHY1_CONTROL				0x0718
-#define EXYNOS5420_MIPI_PHY2_CONTROL				0x071C
+#define EXYNOS5420_MIPI_PHY_CONTROL(n)				(0x0714 + (n) * 4)
 #define EXYNOS5420_DPTX_PHY_CONTROL				0x0728
 #define EXYNOS5420_ARM_CORE2_SYS_PWR_REG			0x1020
 #define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG		0x1024
-- 
2.9.3

[PATCH v4 4/5] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header

[Krzysztof Kozlowski]

The MFD-specific header will go away because it duplicates defines from
exynos-regs-pmu.h.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/mfd/exynos-lpass.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/exynos-lpass.c b/drivers/mfd/exynos-lpass.c
index 2e064fb8826f..8bebad92a385 100644
--- a/drivers/mfd/exynos-lpass.c
+++ b/drivers/mfd/exynos-lpass.c
@@ -18,11 +18,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 #include <linux/types.h>
 
 /* LPASS Top register definitions */
@@ -83,7 +83,7 @@ static void exynos_lpass_enable(struct exynos_lpass *lpass)
 
 	/* Activate related PADs from retention state */
 	regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION,
-		     EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR);
+		     EXYNOS_WAKEUP_FROM_LOWPWR);
 
 	exynos_lpass_core_sw_reset(lpass, LPASS_I2S_SW_RESET);
 	exynos_lpass_core_sw_reset(lpass, LPASS_DMA_SW_RESET);
-- 
2.9.3

[PATCH v4 4/5] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header

[Lee Jones]

On Tue, 14 Mar 2017, Krzysztof Kozlowski wrote:

> The MFD-specific header will go away because it duplicates defines from
> exynos-regs-pmu.h.
> 
> Reported-by: kbuild test robot <fengguang.wu@intel.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
>  drivers/mfd/exynos-lpass.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/exynos-lpass.c b/drivers/mfd/exynos-lpass.c
> index 2e064fb8826f..8bebad92a385 100644
> --- a/drivers/mfd/exynos-lpass.c
> +++ b/drivers/mfd/exynos-lpass.c
> @@ -18,11 +18,11 @@
>  #include <linux/io.h>
>  #include <linux/module.h>
>  #include <linux/mfd/syscon.h>
> -#include <linux/mfd/syscon/exynos5-pmu.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
>  #include <linux/platform_device.h>
>  #include <linux/regmap.h>
> +#include <linux/soc/samsung/exynos-regs-pmu.h>
>  #include <linux/types.h>
>  
>  /* LPASS Top register definitions */
> @@ -83,7 +83,7 @@ static void exynos_lpass_enable(struct exynos_lpass *lpass)
>  
>  	/* Activate related PADs from retention state */
>  	regmap_write(lpass->pmu, EXYNOS5433_PAD_RETENTION_AUD_OPTION,
> -		     EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR);
> +		     EXYNOS_WAKEUP_FROM_LOWPWR);
>  
>  	exynos_lpass_core_sw_reset(lpass, LPASS_I2S_SW_RESET);
>  	exynos_lpass_core_sw_reset(lpass, LPASS_DMA_SW_RESET);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH v4 4/5] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header

[Krzysztof Kozlowski]

On Wed, Mar 15, 2017 at 12:10 PM, Lee Jones <lee.jones@linaro.org> wrote:
> On Tue, 14 Mar 2017, Krzysztof Kozlowski wrote:
>
>> The MFD-specific header will go away because it duplicates defines from
>> exynos-regs-pmu.h.
>>
>> Reported-by: kbuild test robot <fengguang.wu@intel.com>
>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
>> ---
>>  drivers/mfd/exynos-lpass.c | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> Applied, thanks.

Hi,

This is also needed for patch 5/5 in the set so I was wondering if
this can be put on separate branch and then shared if phy maintainers
would need it?

Best regards,
Krzysztof

[PATCH v4 4/5] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header

[Lee Jones]

On Wed, 15 Mar 2017, Krzysztof Kozlowski wrote:

> On Wed, Mar 15, 2017 at 12:10 PM, Lee Jones <lee.jones@linaro.org> wrote:
> > On Tue, 14 Mar 2017, Krzysztof Kozlowski wrote:
> >
> >> The MFD-specific header will go away because it duplicates defines from
> >> exynos-regs-pmu.h.
> >>
> >> Reported-by: kbuild test robot <fengguang.wu@intel.com>
> >> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> >> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> >> ---
> >>  drivers/mfd/exynos-lpass.c | 4 ++--
> >>  1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > Applied, thanks.
> 
> Hi,
> 
> This is also needed for patch 5/5 in the set so I was wondering if
> this can be put on separate branch and then shared if phy maintainers
> would need it?

What is the dependency? 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH v4 4/5] mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header

[Krzysztof Kozlowski]

On Wed, Mar 15, 2017 at 2:12 PM, Lee Jones <lee.jones@linaro.org> wrote:
> On Wed, 15 Mar 2017, Krzysztof Kozlowski wrote:
>
>> On Wed, Mar 15, 2017 at 12:10 PM, Lee Jones <lee.jones@linaro.org> wrote:
>> > On Tue, 14 Mar 2017, Krzysztof Kozlowski wrote:
>> >
>> >> The MFD-specific header will go away because it duplicates defines from
>> >> exynos-regs-pmu.h.
>> >>
>> >> Reported-by: kbuild test robot <fengguang.wu@intel.com>
>> >> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>> >> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
>> >> ---
>> >>  drivers/mfd/exynos-lpass.c | 4 ++--
>> >>  1 file changed, 2 insertions(+), 2 deletions(-)
>> >
>> > Applied, thanks.
>>
>> Hi,
>>
>> This is also needed for patch 5/5 in the set so I was wondering if
>> this can be put on separate branch and then shared if phy maintainers
>> would need it?
>
> What is the dependency?

This patch removes the last usage of define from header we want to
remove (linux/mfd/syscon/exynos5-pmu.h). The next patch (5/5) removes
the header as there are no more users.

BTW, I hope you got all the mails from this patchset including cover letter.

Best regards,
Krzysztof

[GIT PULL] Immutable branch between MFD and PHY due for the v4.12 merge window

[Lee Jones]

Enjoy!

The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:

  Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-phy-v4.12

for you to fetch changes up to f7f6c060547c51691f9b943e6c33f63675c1a0a9:

  mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header (2017-03-23 10:47:27 +0000)

----------------------------------------------------------------
Immutable branch between MFD and PHY due for the v4.12 merge window

----------------------------------------------------------------
Krzysztof Kozlowski (1):
      mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header

 drivers/mfd/exynos-lpass.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[GIT PULL] Immutable branch between MFD and PHY due for the v4.12 merge window

[Krzysztof Kozlowski]

On Thu, Mar 23, 2017 at 12:51 PM, Lee Jones <lee.jones@linaro.org> wrote:
> Enjoy!
>
> The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:
>
>   Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)
>
> are available in the git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-phy-v4.12
>
> for you to fetch changes up to f7f6c060547c51691f9b943e6c33f63675c1a0a9:
>
>   mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header (2017-03-23 10:47:27 +0000)
>
> ----------------------------------------------------------------
> Immutable branch between MFD and PHY due for the v4.12 merge window
>
> ----------------------------------------------------------------
> Krzysztof Kozlowski (1):
>       mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header
>
>  drivers/mfd/exynos-lpass.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Thanks.

Kishon,
This is the dependency for last patch in v4 of:
https://www.spinics.net/lists/arm-kernel/msg568609.html

Everything else is acked and ready for you to apply.

Any comments?

Best regards,
Krzysztof

[GIT PULL] Immutable branch between MFD and PHY due for the v4.12 merge window

[Kishon Vijay Abraham I]

On Thursday 23 March 2017 04:21 PM, Lee Jones wrote:
> Enjoy!
> 
> The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201:
> 
>   Linux 4.11-rc1 (2017-03-05 12:59:56 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-phy-v4.12

merged this to linux-phy.

Thanks
Kishon

> 
> for you to fetch changes up to f7f6c060547c51691f9b943e6c33f63675c1a0a9:
> 
>   mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header (2017-03-23 10:47:27 +0000)
> 
> ----------------------------------------------------------------
> Immutable branch between MFD and PHY due for the v4.12 merge window
> 
> ----------------------------------------------------------------
> Krzysztof Kozlowski (1):
>       mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header
> 
>  drivers/mfd/exynos-lpass.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

[PATCH v4 5/5] phy: exynos: Use one define for enable bit

[Krzysztof Kozlowski]

There is no need for separate defines for Exynos4 and Exynos5 phy enable
bit and MIPI phy reset bits.  In both cases there are the same so
simplify it.

This reduces number of defines and allows removal of one header file.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/phy/phy-exynos-dp-video.c           |  5 ++--
 drivers/phy/phy-exynos-mipi-video.c         | 39 ++++++++++++++---------------
 drivers/phy/phy-exynos5-usbdrd.c            |  5 ++--
 include/linux/mfd/syscon/exynos5-pmu.h      | 22 ----------------
 include/linux/soc/samsung/exynos-regs-pmu.h |  3 ++-
 5 files changed, 25 insertions(+), 49 deletions(-)
 delete mode 100644 include/linux/mfd/syscon/exynos5-pmu.h

diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
index d72193188980..bb3279dbf88c 100644
--- a/drivers/phy/phy-exynos-dp-video.c
+++ b/drivers/phy/phy-exynos-dp-video.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
@@ -37,7 +36,7 @@ static int exynos_dp_video_phy_power_on(struct phy *phy)
 
 	/* Disable power isolation on DP-PHY */
 	return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
-				  EXYNOS5_PHY_ENABLE, EXYNOS5_PHY_ENABLE);
+				  EXYNOS4_PHY_ENABLE, EXYNOS4_PHY_ENABLE);
 }
 
 static int exynos_dp_video_phy_power_off(struct phy *phy)
@@ -46,7 +45,7 @@ static int exynos_dp_video_phy_power_off(struct phy *phy)
 
 	/* Enable power isolation on DP-PHY */
 	return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
-				  EXYNOS5_PHY_ENABLE, 0);
+				  EXYNOS4_PHY_ENABLE, 0);
 }
 
 static const struct phy_ops exynos_dp_video_phy_ops = {
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index acef1d92691e..c198886f80a3 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -12,7 +12,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -64,7 +63,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
 		{
 			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
-			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
@@ -73,7 +72,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
-			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
@@ -82,7 +81,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
-			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
@@ -91,7 +90,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
-			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
@@ -109,46 +108,46 @@ static const struct mipi_phy_device_desc exynos5420_mipi_phy = {
 		{
 			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
-			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
 			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
-			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
+			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
 			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
-			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
 			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
-			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
+			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
 			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
-			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
+			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
 			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
 			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
 		},
@@ -172,7 +171,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 		{
 			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(0),
@@ -181,7 +180,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(0),
@@ -190,7 +189,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(1),
@@ -199,7 +198,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(1),
@@ -208,7 +207,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
 		}, {
 			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
 			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
-			.enable_val = EXYNOS5_PHY_ENABLE,
+			.enable_val = EXYNOS4_PHY_ENABLE,
 			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2),
 			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
 			.resetn_val = BIT(0),
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
index 7c896d0cda18..7c41daa2c625 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/phy-exynos5-usbdrd.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/mutex.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/soc/samsung/exynos-regs-pmu.h>
@@ -236,10 +235,10 @@ static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
 	if (!inst->reg_pmu)
 		return;
 
-	val = on ? 0 : EXYNOS5_PHY_ENABLE;
+	val = on ? 0 : EXYNOS4_PHY_ENABLE;
 
 	regmap_update_bits(inst->reg_pmu, inst->pmu_offset,
-			   EXYNOS5_PHY_ENABLE, val);
+			   EXYNOS4_PHY_ENABLE, val);
 }
 
 /*
diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
deleted file mode 100644
index 0a4ddabc395e..000000000000
--- a/include/linux/mfd/syscon/exynos5-pmu.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Exynos5 SoC series Power Management Unit (PMU) register offsets
- * and bit definitions.
- *
- * Copyright (C) 2014 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_
-#define _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_
-
-#define EXYNOS5_PHY_ENABLE			BIT(0)
-#define EXYNOS5_MIPI_PHY_S_RESETN		BIT(1)
-#define EXYNOS5_MIPI_PHY_M_RESETN		BIT(2)
-
-#define EXYNOS5433_PAD_RETENTION_AUD_OPTION		(0x3028)
-#define EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR	BIT(28)
-
-#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index c261ed927e1e..bebdde5dccd6 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -52,7 +52,8 @@
 
 /* MIPI_PHYn_CONTROL, valid for Exynos3250, Exynos4, Exynos5250 and Exynos5433 */
 #define EXYNOS4_MIPI_PHY_CONTROL(n)		(0x0710 + (n) * 4)
-#define EXYNOS4_MIPI_PHY_ENABLE			(1 << 0)
+/* Phy enable bit, common for all phy registers, not only MIPI */
+#define EXYNOS4_PHY_ENABLE			(1 << 0)
 #define EXYNOS4_MIPI_PHY_SRESETN		(1 << 1)
 #define EXYNOS4_MIPI_PHY_MRESETN		(1 << 2)
 #define EXYNOS4_MIPI_PHY_RESET_MASK		(3 << 1)
-- 
2.9.3

[PATCH v4 0/5] phy/mfd/soc: exynos: Header cleanup

[Kishon Vijay Abraham I]

On Tuesday 14 March 2017 10:16 PM, Krzysztof Kozlowski wrote:
> Suggested by Marek, continuation of cleanup of PMU register defines
> in headers.
> Let's keep all of them in include/linux/soc/samsung/exynos-regs-pmu.h.
> 
> Everything is bisectable but should go in through one tree.
> It can go through phy tree - in that case 4/5 (added in v3) needs Lee's
> ack. For the rest - samsung-soc ack is given by me.
> I can also take it through samsung-soc - please let me know.
> 
> Changes since v3:
> =================
> 1. Minor adjust of commit msg in patch 2/5 (suggested by Bartlomiej).
> 2. Add Bartlomiej's reviews.
> 
> Changes since v2:
> =================
> 1. Rebase wasn't done properly (and MFD Exynos LPASS is not build by exynos
>    defconfig) so Kbuild test robot reported issue. New patch 4/5.
> 
> Changes since v1:
> =================
> 1. Rebase - dependencies should be already in.
> 2. Add Lee's acks.

merged, thanks!

-Kishon
> 
> 
> Best regards,
> Krzysztof
> 
> 
> Krzysztof Kozlowski (5):
>   phy: exynos4: Remove duplicated defines of PHY register defines
>   phy: exynos5: Remove duplicated defines of PHY register defines
>   phy: exynos-mipi-video: Use consistent method to address phy registers
>   mfd: exynos-lpass: Use common soc/exynos-regs-pmu.h header
>   phy: exynos: Use one define for enable bit
> 
>  drivers/mfd/exynos-lpass.c                  |  4 +-
>  drivers/phy/phy-exynos-dp-video.c           |  6 +--
>  drivers/phy/phy-exynos-mipi-video.c         | 71 ++++++++++++++---------------
>  drivers/phy/phy-exynos5-usbdrd.c            |  6 +--
>  include/linux/mfd/syscon/exynos4-pmu.h      | 21 ---------
>  include/linux/mfd/syscon/exynos5-pmu.h      | 52 ---------------------
>  include/linux/soc/samsung/exynos-regs-pmu.h | 16 ++++++-
>  7 files changed, 58 insertions(+), 118 deletions(-)
>  delete mode 100644 include/linux/mfd/syscon/exynos4-pmu.h
>  delete mode 100644 include/linux/mfd/syscon/exynos5-pmu.h
>