From mboxrd@z Thu Jan 1 00:00:00 1970 From: quentin.schulz@free-electrons.com (Quentin Schulz) Date: Wed, 15 Mar 2017 11:55:26 +0100 Subject: [PATCH v4 07/18] ARM: dtsi: axp209: add AC power supply subnode In-Reply-To: <20170315105537.22349-1-quentin.schulz@free-electrons.com> References: <20170315105537.22349-1-quentin.schulz@free-electrons.com> Message-ID: <20170315105537.22349-8-quentin.schulz@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The X-Powers AXP20X PMIC exposes the status of AC power supply, the current current and voltage supplied to the board by the AC power supply. This adds the AC power supply subnode for AXP20X PMIC. Signed-off-by: Quentin Schulz Acked-by: Chen-Yu Tsai Acked-by: Maxime Ripard --- v2: - changed DT node name from ac_power_supply to ac-power-supply, - removed io-channels and io-channel-names from DT (the IIO mapping is done in the IIO ADC driver now), arch/arm/boot/dts/axp209.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 675bb0f..9677dd5 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -53,6 +53,11 @@ interrupt-controller; #interrupt-cells = <1>; + ac_power_supply: ac-power-supply { + compatible = "x-powers,axp202-ac-power-supply"; + status = "disabled"; + }; + axp_gpio: gpio { compatible = "x-powers,axp209-gpio"; gpio-controller; -- 2.9.3