From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Wed, 15 Mar 2017 11:06:36 +0000 Subject: [PATCHv2 1/5] dt-bindings: mfd: Add Altera Arria10 SR Reset Controller bindings In-Reply-To: <1487783419-10912-2-git-send-email-thor.thayer@linux.intel.com> References: <1487783419-10912-1-git-send-email-thor.thayer@linux.intel.com> <1487783419-10912-2-git-send-email-thor.thayer@linux.intel.com> Message-ID: <20170315110636.gdqu2tiowfrdacwe@dell> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, 22 Feb 2017, thor.thayer at linux.intel.com wrote: > From: Thor Thayer > > This patch adds documentation for the Altera A10-SR Reset > Controller DT bindings. > > Signed-off-by: Thor Thayer > --- > v2 No change > --- > Documentation/devicetree/bindings/mfd/altera-a10sr.txt | 11 +++++++++++ > 1 file changed, 11 insertions(+) Applied with Rob's Ack. > diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt > index ea151f2..c8a7365 100644 > --- a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt > +++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt > @@ -18,6 +18,7 @@ The A10SR consists of these sub-devices: > Device Description > ------ ---------- > a10sr_gpio GPIO Controller > +a10sr_rst Reset Controller > > Arria10 GPIO > Required Properties: > @@ -27,6 +28,11 @@ Required Properties: > the second cell is used to specify flags. > See ../gpio/gpio.txt for more information. > > +Arria10 Peripheral PHY Reset > +Required Properties: > +- compatible : Should be "altr,a10sr-reset" > +- #reset-cells : Should be one. > + > Example: > > resource-manager at 0 { > @@ -43,4 +49,9 @@ Example: > gpio-controller; > #gpio-cells = <2>; > }; > + > + a10sr_rst: reset-controller { > + compatible = "altr,a10sr-reset"; > + #reset-cells = <1>; > + }; > }; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog