From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [Resend PATCH 4/4] dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file
Date: Wed, 15 Mar 2017 11:23:09 +0000 [thread overview]
Message-ID: <20170315112309.xkw2hpwqthy5ia2v@dell> (raw)
In-Reply-To: <1489066231-4627-1-git-send-email-gabriel.fernandez@st.com>
On Thu, 09 Mar 2017, gabriel.fernandez at st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@st.com>
>
> This patch lists STM32F7's RCC numeric constants.
> It will be used by clock and reset drivers, and DT bindings.
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
> arch/arm/boot/dts/stm32f746.dtsi | 51 ++++++++--------
> include/dt-bindings/mfd/stm32f7-rcc.h | 112 ++++++++++++++++++++++++++++++++++
For the MFD changes:
Acked-by: Lee Jones <lee.jones@linaro.org>
> 2 files changed, 138 insertions(+), 25 deletions(-)
> create mode 100644 include/dt-bindings/mfd/stm32f7-rcc.h
>
> diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
> index e05e131..09d6649 100644
> --- a/arch/arm/boot/dts/stm32f746.dtsi
> +++ b/arch/arm/boot/dts/stm32f746.dtsi
> @@ -44,6 +44,7 @@
> #include "armv7-m.dtsi"
> #include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
> #include <dt-bindings/clock/stm32fx-clock.h>
> +#include <dt-bindings/mfd/stm32f7-rcc.h>
>
> / {
> clocks {
> @@ -77,7 +78,7 @@
> compatible = "st,stm32-timer";
> reg = <0x40000000 0x400>;
> interrupts = <28>;
> - clocks = <&rcc 0 128>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
> status = "disabled";
> };
>
> @@ -85,7 +86,7 @@
> compatible = "st,stm32-timer";
> reg = <0x40000400 0x400>;
> interrupts = <29>;
> - clocks = <&rcc 0 129>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
> status = "disabled";
> };
>
> @@ -93,7 +94,7 @@
> compatible = "st,stm32-timer";
> reg = <0x40000800 0x400>;
> interrupts = <30>;
> - clocks = <&rcc 0 130>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
> status = "disabled";
> };
>
> @@ -101,14 +102,14 @@
> compatible = "st,stm32-timer";
> reg = <0x40000c00 0x400>;
> interrupts = <50>;
> - clocks = <&rcc 0 131>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
> };
>
> timer6: timer at 40001000 {
> compatible = "st,stm32-timer";
> reg = <0x40001000 0x400>;
> interrupts = <54>;
> - clocks = <&rcc 0 132>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
> status = "disabled";
> };
>
> @@ -116,7 +117,7 @@
> compatible = "st,stm32-timer";
> reg = <0x40001400 0x400>;
> interrupts = <55>;
> - clocks = <&rcc 0 133>;
> + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
> status = "disabled";
> };
>
> @@ -124,7 +125,7 @@
> compatible = "st,stm32f7-usart", "st,stm32f7-uart";
> reg = <0x40004400 0x400>;
> interrupts = <38>;
> - clocks = <&rcc 0 145>;
> + clocks = <&rcc 1 CLK_USART2>;
> status = "disabled";
> };
>
> @@ -132,7 +133,7 @@
> compatible = "st,stm32f7-usart", "st,stm32f7-uart";
> reg = <0x40004800 0x400>;
> interrupts = <39>;
> - clocks = <&rcc 0 146>;
> + clocks = <&rcc 1 CLK_USART3>;
> status = "disabled";
> };
>
> @@ -140,7 +141,7 @@
> compatible = "st,stm32f7-uart";
> reg = <0x40004c00 0x400>;
> interrupts = <52>;
> - clocks = <&rcc 0 147>;
> + clocks = <&rcc 1 CLK_UART4>;
> status = "disabled";
> };
>
> @@ -148,7 +149,7 @@
> compatible = "st,stm32f7-uart";
> reg = <0x40005000 0x400>;
> interrupts = <53>;
> - clocks = <&rcc 0 148>;
> + clocks = <&rcc 1 CLK_UART5>;
> status = "disabled";
> };
>
> @@ -156,7 +157,7 @@
> compatible = "st,stm32f7-usart", "st,stm32f7-uart";
> reg = <0x40007800 0x400>;
> interrupts = <82>;
> - clocks = <&rcc 0 158>;
> + clocks = <&rcc 1 CLK_UART7>;
> status = "disabled";
> };
>
> @@ -164,7 +165,7 @@
> compatible = "st,stm32f7-usart", "st,stm32f7-uart";
> reg = <0x40007c00 0x400>;
> interrupts = <83>;
> - clocks = <&rcc 0 159>;
> + clocks = <&rcc 1 CLK_UART8>;
> status = "disabled";
> };
>
> @@ -172,7 +173,7 @@
> compatible = "st,stm32f7-usart", "st,stm32f7-uart";
> reg = <0x40011000 0x400>;
> interrupts = <37>;
> - clocks = <&rcc 0 164>;
> + clocks = <&rcc 1 CLK_USART1>;
> status = "disabled";
> };
>
> @@ -180,7 +181,7 @@
> compatible = "st,stm32f7-usart", "st,stm32f7-uart";
> reg = <0x40011400 0x400>;
> interrupts = <71>;
> - clocks = <&rcc 0 165>;
> + clocks = <&rcc 1 CLK_USART6>;
> status = "disabled";
> };
>
> @@ -215,7 +216,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x0 0x400>;
> - clocks = <&rcc 0 256>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
> st,bank-name = "GPIOA";
> };
>
> @@ -223,7 +224,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x400 0x400>;
> - clocks = <&rcc 0 257>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
> st,bank-name = "GPIOB";
> };
>
> @@ -231,7 +232,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x800 0x400>;
> - clocks = <&rcc 0 258>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
> st,bank-name = "GPIOC";
> };
>
> @@ -239,7 +240,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0xc00 0x400>;
> - clocks = <&rcc 0 259>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
> st,bank-name = "GPIOD";
> };
>
> @@ -247,7 +248,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x1000 0x400>;
> - clocks = <&rcc 0 260>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
> st,bank-name = "GPIOE";
> };
>
> @@ -255,7 +256,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x1400 0x400>;
> - clocks = <&rcc 0 261>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
> st,bank-name = "GPIOF";
> };
>
> @@ -263,7 +264,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x1800 0x400>;
> - clocks = <&rcc 0 262>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
> st,bank-name = "GPIOG";
> };
>
> @@ -271,7 +272,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x1c00 0x400>;
> - clocks = <&rcc 0 263>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
> st,bank-name = "GPIOH";
> };
>
> @@ -279,7 +280,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x2000 0x400>;
> - clocks = <&rcc 0 264>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
> st,bank-name = "GPIOI";
> };
>
> @@ -287,7 +288,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x2400 0x400>;
> - clocks = <&rcc 0 265>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
> st,bank-name = "GPIOJ";
> };
>
> @@ -295,7 +296,7 @@
> gpio-controller;
> #gpio-cells = <2>;
> reg = <0x2800 0x400>;
> - clocks = <&rcc 0 266>;
> + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
> st,bank-name = "GPIOK";
> };
>
> diff --git a/include/dt-bindings/mfd/stm32f7-rcc.h b/include/dt-bindings/mfd/stm32f7-rcc.h
> new file mode 100644
> index 0000000..e36cc69
> --- /dev/null
> +++ b/include/dt-bindings/mfd/stm32f7-rcc.h
> @@ -0,0 +1,112 @@
> +/*
> + * This header provides constants for the STM32F7 RCC IP
> + */
> +
> +#ifndef _DT_BINDINGS_MFD_STM32F7_RCC_H
> +#define _DT_BINDINGS_MFD_STM32F7_RCC_H
> +
> +/* AHB1 */
> +#define STM32F7_RCC_AHB1_GPIOA 0
> +#define STM32F7_RCC_AHB1_GPIOB 1
> +#define STM32F7_RCC_AHB1_GPIOC 2
> +#define STM32F7_RCC_AHB1_GPIOD 3
> +#define STM32F7_RCC_AHB1_GPIOE 4
> +#define STM32F7_RCC_AHB1_GPIOF 5
> +#define STM32F7_RCC_AHB1_GPIOG 6
> +#define STM32F7_RCC_AHB1_GPIOH 7
> +#define STM32F7_RCC_AHB1_GPIOI 8
> +#define STM32F7_RCC_AHB1_GPIOJ 9
> +#define STM32F7_RCC_AHB1_GPIOK 10
> +#define STM32F7_RCC_AHB1_CRC 12
> +#define STM32F7_RCC_AHB1_BKPSRAM 18
> +#define STM32F7_RCC_AHB1_DTCMRAM 20
> +#define STM32F7_RCC_AHB1_DMA1 21
> +#define STM32F7_RCC_AHB1_DMA2 22
> +#define STM32F7_RCC_AHB1_DMA2D 23
> +#define STM32F7_RCC_AHB1_ETHMAC 25
> +#define STM32F7_RCC_AHB1_ETHMACTX 26
> +#define STM32F7_RCC_AHB1_ETHMACRX 27
> +#define STM32FF_RCC_AHB1_ETHMACPTP 28
> +#define STM32F7_RCC_AHB1_OTGHS 29
> +#define STM32F7_RCC_AHB1_OTGHSULPI 30
> +
> +#define STM32F7_AHB1_RESET(bit) (STM32F7_RCC_AHB1_##bit + (0x10 * 8))
> +#define STM32F7_AHB1_CLOCK(bit) (STM32F7_RCC_AHB1_##bit)
> +
> +
> +/* AHB2 */
> +#define STM32F7_RCC_AHB2_DCMI 0
> +#define STM32F7_RCC_AHB2_CRYP 4
> +#define STM32F7_RCC_AHB2_HASH 5
> +#define STM32F7_RCC_AHB2_RNG 6
> +#define STM32F7_RCC_AHB2_OTGFS 7
> +
> +#define STM32F7_AHB2_RESET(bit) (STM32F7_RCC_AHB2_##bit + (0x14 * 8))
> +#define STM32F7_AHB2_CLOCK(bit) (STM32F7_RCC_AHB2_##bit + 0x20)
> +
> +/* AHB3 */
> +#define STM32F7_RCC_AHB3_FMC 0
> +#define STM32F7_RCC_AHB3_QSPI 1
> +
> +#define STM32F7_AHB3_RESET(bit) (STM32F7_RCC_AHB3_##bit + (0x18 * 8))
> +#define STM32F7_AHB3_CLOCK(bit) (STM32F7_RCC_AHB3_##bit + 0x40)
> +
> +/* APB1 */
> +#define STM32F7_RCC_APB1_TIM2 0
> +#define STM32F7_RCC_APB1_TIM3 1
> +#define STM32F7_RCC_APB1_TIM4 2
> +#define STM32F7_RCC_APB1_TIM5 3
> +#define STM32F7_RCC_APB1_TIM6 4
> +#define STM32F7_RCC_APB1_TIM7 5
> +#define STM32F7_RCC_APB1_TIM12 6
> +#define STM32F7_RCC_APB1_TIM13 7
> +#define STM32F7_RCC_APB1_TIM14 8
> +#define STM32F7_RCC_APB1_LPTIM1 9
> +#define STM32F7_RCC_APB1_WWDG 11
> +#define STM32F7_RCC_APB1_SPI2 14
> +#define STM32F7_RCC_APB1_SPI3 15
> +#define STM32F7_RCC_APB1_SPDIFRX 16
> +#define STM32F7_RCC_APB1_UART2 17
> +#define STM32F7_RCC_APB1_UART3 18
> +#define STM32F7_RCC_APB1_UART4 19
> +#define STM32F7_RCC_APB1_UART5 20
> +#define STM32F7_RCC_APB1_I2C1 21
> +#define STM32F7_RCC_APB1_I2C2 22
> +#define STM32F7_RCC_APB1_I2C3 23
> +#define STM32F7_RCC_APB1_I2C4 24
> +#define STM32F7_RCC_APB1_CAN1 25
> +#define STM32F7_RCC_APB1_CAN2 26
> +#define STM32F7_RCC_APB1_CEC 27
> +#define STM32F7_RCC_APB1_PWR 28
> +#define STM32F7_RCC_APB1_DAC 29
> +#define STM32F7_RCC_APB1_UART7 30
> +#define STM32F7_RCC_APB1_UART8 31
> +
> +#define STM32F7_APB1_RESET(bit) (STM32F7_RCC_APB1_##bit + (0x20 * 8))
> +#define STM32F7_APB1_CLOCK(bit) (STM32F7_RCC_APB1_##bit + 0x80)
> +
> +/* APB2 */
> +#define STM32F7_RCC_APB2_TIM1 0
> +#define STM32F7_RCC_APB2_TIM8 1
> +#define STM32F7_RCC_APB2_USART1 4
> +#define STM32F7_RCC_APB2_USART6 5
> +#define STM32F7_RCC_APB2_ADC1 8
> +#define STM32F7_RCC_APB2_ADC2 9
> +#define STM32F7_RCC_APB2_ADC3 10
> +#define STM32F7_RCC_APB2_SDMMC1 11
> +#define STM32F7_RCC_APB2_SPI1 12
> +#define STM32F7_RCC_APB2_SPI4 13
> +#define STM32F7_RCC_APB2_SYSCFG 14
> +#define STM32F7_RCC_APB2_TIM9 16
> +#define STM32F7_RCC_APB2_TIM10 17
> +#define STM32F7_RCC_APB2_TIM11 18
> +#define STM32F7_RCC_APB2_SPI5 20
> +#define STM32F7_RCC_APB2_SPI6 21
> +#define STM32F7_RCC_APB2_SAI1 22
> +#define STM32F7_RCC_APB2_SAI2 23
> +#define STM32F7_RCC_APB2_LTDC 26
> +
> +#define STM32F7_APB2_RESET(bit) (STM32F7_RCC_APB2_##bit + (0x24 * 8))
> +#define STM32F7_APB2_CLOCK(bit) (STM32F7_RCC_APB2_##bit + 0xA0)
> +
> +#endif /* _DT_BINDINGS_MFD_STM32F7_RCC_H */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
prev parent reply other threads:[~2017-03-15 11:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-09 13:30 [Resend PATCH 4/4] dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file gabriel.fernandez at st.com
2017-03-15 11:23 ` Lee Jones [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170315112309.xkw2hpwqthy5ia2v@dell \
--to=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox