From: john@metanate.com (John Keeping)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] pinctrl: rockchip: remove unnecessary locking
Date: Wed, 15 Mar 2017 17:46:51 +0000 [thread overview]
Message-ID: <20170315174654.15128-2-john@metanate.com> (raw)
In-Reply-To: <20170315174654.15128-1-john@metanate.com>
regmap_update_bits does its own locking and everything else accessed
here is a local variable so there is no need to lock around it.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
---
v2:
- Also remove locking in rockchip_set_schmitt()
---
drivers/pinctrl/pinctrl-rockchip.c | 28 ++--------------------------
1 file changed, 2 insertions(+), 26 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 1e276dfe1763..128c383ea7ba 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -652,7 +652,6 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
int iomux_num = (pin / 8);
struct regmap *regmap;
int reg, ret, mask, mux_type;
- unsigned long flags;
u8 bit;
u32 data, rmask;
@@ -701,15 +700,11 @@ static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
if (ctrl->iomux_recalc && (mux_type & IOMUX_RECALCED))
ctrl->iomux_recalc(bank->bank_num, pin, ®, &bit, &mask);
- spin_lock_irqsave(&bank->slock, flags);
-
data = (mask << (bit + 16));
rmask = data | (data >> 16);
data |= (mux & mask) << bit;
ret = regmap_update_bits(regmap, reg, rmask, data);
- spin_unlock_irqrestore(&bank->slock, flags);
-
return ret;
}
@@ -1135,7 +1130,6 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
struct rockchip_pinctrl *info = bank->drvdata;
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct regmap *regmap;
- unsigned long flags;
int reg, ret, i;
u32 data, rmask, rmask_bits, temp;
u8 bit;
@@ -1163,8 +1157,6 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
return ret;
}
- spin_lock_irqsave(&bank->slock, flags);
-
switch (drv_type) {
case DRV_TYPE_IO_1V8_3V0_AUTO:
case DRV_TYPE_IO_3V3_ONLY:
@@ -1185,17 +1177,14 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
rmask = BIT(15) | BIT(31);
data |= BIT(31);
ret = regmap_update_bits(regmap, reg, rmask, data);
- if (ret) {
- spin_unlock_irqrestore(&bank->slock, flags);
+ if (ret)
return ret;
- }
rmask = 0x3 | (0x3 << 16);
temp |= (0x3 << 16);
reg += 0x4;
ret = regmap_update_bits(regmap, reg, rmask, temp);
- spin_unlock_irqrestore(&bank->slock, flags);
return ret;
case 18 ... 21:
/* setting fully enclosed in the second register */
@@ -1203,7 +1192,6 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
bit -= 16;
break;
default:
- spin_unlock_irqrestore(&bank->slock, flags);
dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n",
bit, drv_type);
return -EINVAL;
@@ -1215,7 +1203,6 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
rmask_bits = RK3288_DRV_BITS_PER_PIN;
break;
default:
- spin_unlock_irqrestore(&bank->slock, flags);
dev_err(info->dev, "unsupported pinctrl drive type: %d\n",
drv_type);
return -EINVAL;
@@ -1227,7 +1214,6 @@ static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
data |= (ret << bit);
ret = regmap_update_bits(regmap, reg, rmask, data);
- spin_unlock_irqrestore(&bank->slock, flags);
return ret;
}
@@ -1339,16 +1325,12 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
return ret;
}
- spin_lock_irqsave(&bank->slock, flags);
-
/* enable the write to the equivalent lower bits */
data = ((1 << RK3188_PULL_BITS_PER_PIN) - 1) << (bit + 16);
rmask = data | (data >> 16);
data |= (ret << bit);
ret = regmap_update_bits(regmap, reg, rmask, data);
-
- spin_unlock_irqrestore(&bank->slock, flags);
break;
default:
dev_err(info->dev, "unsupported pinctrl type\n");
@@ -1408,7 +1390,6 @@ static int rockchip_set_schmitt(struct rockchip_pin_bank *bank,
struct rockchip_pin_ctrl *ctrl = info->ctrl;
struct regmap *regmap;
int reg, ret;
- unsigned long flags;
u8 bit;
u32 data, rmask;
@@ -1419,16 +1400,11 @@ static int rockchip_set_schmitt(struct rockchip_pin_bank *bank,
if (ret)
return ret;
- spin_lock_irqsave(&bank->slock, flags);
-
/* enable the write to the equivalent lower bits */
data = BIT(bit + 16) | (enable << bit);
rmask = BIT(bit + 16) | BIT(bit);
- ret = regmap_update_bits(regmap, reg, rmask, data);
- spin_unlock_irqrestore(&bank->slock, flags);
-
- return ret;
+ return regmap_update_bits(regmap, reg, rmask, data);
}
/*
--
2.12.0.377.gf910686b23.dirty
next prev parent reply other threads:[~2017-03-15 17:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-15 17:46 [PATCH v2 0/4] pinctrl: rockchip: PREEMPT_RT_FULL fixes John Keeping
2017-03-15 17:46 ` John Keeping [this message]
2017-03-15 18:51 ` [PATCH v2.1 1/4] pinctrl: rockchip: remove unnecessary locking John Keeping
2017-03-23 9:03 ` [PATCH v2 " Linus Walleij
2017-03-15 17:46 ` [PATCH v2 2/4] pinctrl: rockchip: convert to raw spinlock John Keeping
2017-03-15 18:01 ` Julia Cartwright
2017-03-15 18:08 ` John Keeping
2017-03-15 18:16 ` Heiko Stuebner
2017-03-15 18:23 ` Julia Cartwright
2017-03-15 18:46 ` John Keeping
2017-03-15 17:46 ` [PATCH v2 3/4] pinctrl: rockchip: split out verification of mux settings John Keeping
2017-03-15 17:46 ` [PATCH v2 4/4] pinctrl: rockchip: avoid hardirq-unsafe functions in irq_chip John Keeping
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170315174654.15128-2-john@metanate.com \
--to=john@metanate.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox