[PATCH 1/2] dt-bindings: thermal: add support for Raspberry Pi thermal

[zajec5@gmail.com (Rafał Miłecki)]

From: Rafa? Mi?ecki <rafal@milecki.pl>

This commit documents binding for BCM2835 SoC thermal used in Raspberry
Pi devices.

Signed-off-by: Rafa? Mi?ecki <rafal@milecki.pl>
---
 .../bindings/thermal/raspberrypi,bcm2835-thermal        | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal

diff --git a/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal b/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal
new file mode 100644
index 000000000000..fbffa9291ba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal
@@ -0,0 +1,17 @@
+* Broadcom BCM2835 SoC Raspberry Pi Thermal
+
+This binding describes thermal sensor that is part of BCM2835 SoC.
+
+Required properties:
+- compatible : Must be "raspberrypi,bcm2835-thermal"
+- firmware : Reference to the Raspberry Pi firmware device node, see
+	raspberrypi,bcm2835-firmware for details
+- #thermal-sensor-cells : Should be <0>
+
+Example:
+
+thermal {
+	compatible = "raspberrypi,bcm2835-thermal";
+	firmware = <&firmware>;
+	#thermal-sensor-cells = <0>;
+};
-- 
2.11.0