From mboxrd@z Thu Jan 1 00:00:00 1970 From: uwe@kleine-koenig.org (=?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?=) Date: Mon, 20 Mar 2017 09:21:11 +0100 Subject: [PATCH 2/2] ARM: dts: imx25-pinfunc: Move MX25_PAD_TDO__TDO to a more sensible place In-Reply-To: <20170320082111.3249-1-uwe@kleine-koenig.org> References: <20170320082111.3249-1-uwe@kleine-koenig.org> Message-ID: <20170320082111.3249-2-uwe@kleine-koenig.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The pinfunc definitions are ordered by mux_reg and so automatically by conf_reg, too. PAD_TDO is the only pad that has a conf_reg but no mux_reg. Put it to the place where it its in the order of conf_regs instead of the top. Signed-off-by: Uwe Kleine-K?nig --- arch/arm/boot/dts/imx25-pinfunc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index f987afce2f9d..6c63dca1b9b8 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -17,8 +17,6 @@ * */ -#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 - #define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000 #define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000 @@ -541,6 +539,8 @@ #define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x01 0x000 #define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x05 0x000 +#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000 + #define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000 #define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000 -- 2.11.0