[PATCH v3 1/4] drm/rockchip/dsi: check phy_cfg_clk only for RK3399

[seanpaul@chromium.org (Sean Paul)]

On Fri, Mar 17, 2017 at 11:54:21AM +0800, Chris Zhong wrote:
> For RK3399, the phy_cfg_clk is a required clock, if phy_cfg_clk is
> disabled, MIPI phy can not work. Let's return a error if there is no
> phy_cfg_clk in dts property, when the pdata match RK3399.
> 

The dt bindings say this is a required clock, I think you'll need to update them
to reflect that this is optional for certain SoCs

Sean

> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> ---
> 
> Changes in v3:
> - add a DW_MIPI_NEEDS_PHY_CFG_CLK for RK3399
> 
> Changes in v2: None
> 
>  drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index f84f9ae..68f48b0 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -251,6 +251,8 @@
>  #define THS_PRE_PROGRAM_EN	BIT(7)
>  #define THS_ZERO_PROGRAM_EN	BIT(6)
>  
> +#define DW_MIPI_NEEDS_PHY_CFG_CLK	BIT(0)
> +
>  enum {
>  	BANDGAP_97_07,
>  	BANDGAP_98_05,
> @@ -279,6 +281,7 @@ struct dw_mipi_dsi_plat_data {
>  	u32 grf_switch_reg;
>  	u32 grf_dsi0_mode;
>  	u32 grf_dsi0_mode_reg;
> +	unsigned int flags;
>  	unsigned int max_data_lanes;
>  };
>  
> @@ -1136,6 +1139,7 @@ static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = {
>  	.grf_switch_reg = RK3399_GRF_SOC_CON19,
>  	.grf_dsi0_mode = RK3399_GRF_DSI_MODE,
>  	.grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22,
> +	.flags = DW_MIPI_NEEDS_PHY_CFG_CLK,
>  	.max_data_lanes = 4,
>  };
>  
> @@ -1227,15 +1231,13 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
>  		clk_disable_unprepare(dsi->pclk);
>  	}
>  
> -	dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg");
> -	if (IS_ERR(dsi->phy_cfg_clk)) {
> -		ret = PTR_ERR(dsi->phy_cfg_clk);
> -		if (ret != -ENOENT) {
> +	if (pdata->flags & DW_MIPI_NEEDS_PHY_CFG_CLK) {
> +		dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg");
> +		if (IS_ERR(dsi->phy_cfg_clk)) {
> +			ret = PTR_ERR(dsi->phy_cfg_clk);
>  			dev_err(dev, "Unable to get phy_cfg_clk: %d\n", ret);
>  			return ret;
>  		}
> -		dsi->phy_cfg_clk = NULL;
> -		dev_dbg(dev, "have not phy_cfg_clk\n");
>  	}
>  
>  	ret = clk_prepare_enable(dsi->pllref_clk);
> -- 
> 2.6.3
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Sean Paul, Software Engineer, Google / Chromium OS