[PATCH v3 2/4] dt-bindings: add the grf clock for dw-mipi-dsi

[seanpaul@chromium.org (Sean Paul)]

On Fri, Mar 17, 2017 at 11:54:22AM +0800, Chris Zhong wrote:
> For RK3399, the grf clock should be controlled by dw-mipi-dsi driver,
> add the description for this clock.
> 
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> ---
> 
> Changes in v3: None
> Changes in v2: None
> 
>  .../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt       | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
> index 188f6f7..7e17a60 100644
> --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
> +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
> @@ -10,7 +10,7 @@ Required properties:
>  - interrupts: Represent the controller's interrupt to the CPU(s).
>  - clocks, clock-names: Phandles to the controller's pll reference
>    clock(ref) and APB clock(pclk). For RK3399, a phy config clock
> -  (phy_cfg) is additional required. As described in [1].
> +  (phy_cfg) and a grf clock(grf) are additional required. As described in [1].

These are only required for rk3399, you should make that clear.

Sean

>  - rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
>  - ports: contain a port node with endpoint definitions as defined in [2].
>    For vopb,set the reg = <0> and set the reg = <1> for vopl.
> -- 
> 2.6.3
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Sean Paul, Software Engineer, Google / Chromium OS