From: opendmb@gmail.com (Doug Berger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/9] bus: brcmstb_gisb: Add ARM64 support
Date: Fri, 24 Mar 2017 07:46:30 -0700 [thread overview]
Message-ID: <20170324144632.5896-8-opendmb@gmail.com> (raw)
In-Reply-To: <20170324144632.5896-1-opendmb@gmail.com>
From: Florian Fainelli <f.fainelli@gmail.com>
Hook to the ARM64 data abort exception #16: synchronous external
abort, which is how the GISB errors will be funneled back to the
ARM64 CPU in case of problems
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/bus/Kconfig | 2 +-
drivers/bus/brcmstb_gisb.c | 15 ++++++++++++---
2 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 0a52da439abf..d2a5f1184022 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -57,7 +57,7 @@ config ARM_CCN
config BRCMSTB_GISB_ARB
bool "Broadcom STB GISB bus arbiter"
- depends on ARM || MIPS
+ depends on ARM || ARM64 || MIPS
default ARCH_BRCMSTB || BMIPS_GENERIC
help
Driver for the Broadcom Set Top Box System-on-a-chip internal bus
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index c8d2a61d21ed..bf26b4017a2c 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,6 +30,11 @@
#include <asm/signal.h>
#endif
+#ifdef CONFIG_ARM64
+#include <asm/signal.h>
+#include <asm/system_misc.h>
+#endif
+
#ifdef CONFIG_MIPS
#include <asm/traps.h>
#endif
@@ -225,7 +230,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
return 0;
}
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
@@ -235,7 +240,7 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
brcmstb_gisb_arb_decode_addr(gdev, "bus error");
-#if !defined(CONFIG_ARM_LPAE)
+#if defined(CONFIG_ARM) && !defined(CONFIG_ARM_LPAE)
/*
* If it was an imprecise abort, then we need to correct the
* return address to be _after_ the instruction.
@@ -247,7 +252,7 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
/* Always report unhandled exception */
return 1;
}
-#endif
+#endif /* CONFIG_ARM || CONFIG_ARM64 */
#ifdef CONFIG_MIPS
static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
@@ -395,6 +400,10 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
"imprecise external abort");
#endif
#endif /* CONFIG_ARM */
+#ifdef CONFIG_ARM64
+ hook_fault_code(16, brcmstb_bus_error_handler, SIGBUS, 0,
+ "synchronous external abort");
+#endif
#ifdef CONFIG_MIPS
board_be_handler = brcmstb_bus_error_handler;
#endif
--
2.12.0
next prev parent reply other threads:[~2017-03-24 14:46 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-24 14:46 [PATCH 0/9] bus: brcmstb_gisb: add support for GISBv7 arbiter Doug Berger
2017-03-24 14:46 ` [PATCH 1/9] arm64: mm: Allow installation of memory abort handlers Doug Berger
2017-03-24 14:46 ` [PATCH 2/9] arm64: mm: mark fault_info __ro_after_init Doug Berger
2017-03-24 14:46 ` [PATCH 3/9] arm64: mm: install SError abort handler Doug Berger
2017-03-24 15:16 ` Mark Rutland
2017-03-24 16:48 ` Doug Berger
2017-03-24 17:35 ` Mark Rutland
2017-03-24 17:53 ` Florian Fainelli
2017-03-24 18:31 ` Mark Rutland
2017-03-24 19:02 ` Florian Fainelli
2017-03-25 10:06 ` Marc Zyngier
2017-03-27 20:19 ` Florian Fainelli
2017-03-24 14:46 ` [PATCH 4/9] bus: brcmstb_gisb: Use register offsets with writes too Doug Berger
2017-03-25 5:21 ` Gregory Fong
2017-03-24 14:46 ` [PATCH 5/9] bus: brcmstb_gisb: Correct hooking of ARM aborts Doug Berger
2017-03-24 14:46 ` [PATCH 6/9] bus: brcmstb_gisb: correct support for 64-bit address output Doug Berger
2017-03-25 5:36 ` Gregory Fong
2017-03-24 14:46 ` Doug Berger [this message]
2017-03-24 14:46 ` [PATCH 8/9] bus: brcmstb_gisb: add ARM64 SError support Doug Berger
2017-03-24 14:46 ` [PATCH 9/9] bus: brcmstb_gisb: update to support new revision Doug Berger
2017-03-24 15:03 ` [PATCH 0/9] bus: brcmstb_gisb: add support for GISBv7 arbiter Mark Rutland
2017-03-24 16:02 ` Doug Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170324144632.5896-8-opendmb@gmail.com \
--to=opendmb@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).