From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Fri, 24 Mar 2017 10:58:02 -0700 Subject: [GIT PULL 2/7] Broadcom devicetree changes for 4.12 In-Reply-To: <20170324175807.27272-1-f.fainelli@gmail.com> References: <20170324175807.27272-1-f.fainelli@gmail.com> Message-ID: <20170324175807.27272-2-f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following changes since commit c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201: Linux 4.11-rc1 (2017-03-05 12:59:56 -0800) are available in the git repository at: http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.12/devicetree for you to fetch changes up to 414ce21ae20547e0eea72fe0c4e8ee3280d30888: Merge tag 'bcm2835-dt-next-2017-03-21' into devicetree/next (2017-03-24 10:12:31 -0700) ---------------------------------------------------------------- This pull request contains Broadcom ARM-based SoCs Device Tree updates for 4.12, please pull the following: - Rafal: * adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with a bunch of BCM43602 radios. * updates the BCM5301X DTS and DTS include file and moves the serial console parameters to the DTS include file since all BCM5301X that we have so far are consistent in using the same UART. He also does the same for the BCM53573 DTS. * makes some updates to the Tenda AC9 platform by describing its PCIe controllers and endpoints in order to be able to represent GPIOs attached to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected to one of these GPIOs. * re-licenses the DTS files he created to the ISC license * removes the use of the non-existend "default-off" LED trigger in the BCM53573 and BCM5301X DTS files - Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness - Jon: * adds NAND controller Device Tree nodes to the BCM953012K reference board * converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller Device Tree nodes. * fixes the GIC PPI interrupt flags that the kernel now reports about. * adds ARM TWD watchdog entries to the BCM5301X DTS include file * adds I2C entries to the BCM5301X DTS include files. * disables i2c by default in the Northstar Plus DTS include file, and ,enables it at the board level instead. * adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS include files. - Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet aliases to the BCM53012HR board since some bootloaders require that for MAC address patching. - Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files but leaves them disabled by default (overlays should take care of enabling it) - Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs - Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs - Rob fixes the iProc msi-controller name and unit address now that DTC can produce additional errors ---------------------------------------------------------------- Aditya Xavier (1): ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys Boris Brezillon (1): ARM: dts: bcm283x: Add HDMI audio related properties Eric Anholt (1): ARM: dts: bcm2835: Add the DSI module nodes and clocks. Florian Fainelli (1): Merge tag 'bcm2835-dt-next-2017-03-21' into devicetree/next Gerd Hoffmann (1): ARM: dts: bcm2835: add sdhost controller to devicetree Jon Mason (7): ARM: dts: BCM5301X: Add NAND entries to bcm953012k ARM: dts: BCM5301X: convert to iProc QSPI ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags ARM: dts: BCM5301X: Add TWD WD Support to DT ARM: dts: BCM5301X: Add I2C support to the DT ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree ARM: dts: NSP: disable i2c DT entry by default Rafa? Mi?ecki (11): ARM: dts: BCM5301X: Add basic DT for Linksys EA9200 ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1 ARM: dts: BCM5301X: Add basic DT for Linksys EA9500 ARM: dts: BCM53573: Describe Tenda AC9 PCIe card in DT ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED ARM: dts: BCM5301X: Relicense DTS files I created to the ISC ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2 ARM: dts: BCM5301X: Specify serial console params in dtsi files ARM: dts: BCM53573: Specify serial console parameters Rob Herring (1): ARM: dts: bcm: fix msi-controller name and unit address Steve Lin (4): ARM: dts: BCM5301X: Add support for BCM953012HR ARM: dts: BCM953012HR: Add ethernet aliases ARM: dts: NSP: Add mailbox (PDC) to NSP ARM: dts: NSP: Add crypto (SPU) to dtsi arch/arm/boot/dts/Makefile | 5 ++ arch/arm/boot/dts/bcm-cygnus.dtsi | 4 +- arch/arm/boot/dts/bcm-nsp.dtsi | 36 +++++++- arch/arm/boot/dts/bcm2835-rpi.dtsi | 14 ++++ arch/arm/boot/dts/bcm283x.dtsi | 60 ++++++++++++- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 17 ++-- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 14 +++- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 5 -- arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 41 +++++++++ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 - arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 15 +++- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 10 --- arch/arm/boot/dts/bcm4708.dtsi | 8 ++ arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 14 +++- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 16 ++-- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 12 ++- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 98 ++++++++++++++++++++++ arch/arm/boot/dts/bcm47081.dtsi | 20 ++++- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 14 +++- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 8 -- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 42 ++++++++++ arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 19 +++-- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 41 ++++++--- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 8 -- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 18 ++-- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 36 ++++++++ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 8 -- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 6 -- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 39 ++++++++- arch/arm/boot/dts/bcm5301x.dtsi | 81 +++++++++++++----- arch/arm/boot/dts/bcm53573.dtsi | 10 ++- arch/arm/boot/dts/bcm94708.dts | 8 -- arch/arm/boot/dts/bcm94709.dts | 8 -- arch/arm/boot/dts/bcm953012er.dts | 8 -- arch/arm/boot/dts/bcm953012hr.dts | 97 +++++++++++++++++++++ arch/arm/boot/dts/bcm953012k.dts | 62 +++++++++++++- arch/arm/boot/dts/bcm958522er.dts | 10 ++- arch/arm/boot/dts/bcm958525er.dts | 10 ++- arch/arm/boot/dts/bcm958525xmc.dts | 10 +++ arch/arm/boot/dts/bcm958622hr.dts | 10 ++- arch/arm/boot/dts/bcm958623hr.dts | 10 ++- arch/arm/boot/dts/bcm958625hr.dts | 8 ++ arch/arm/boot/dts/bcm958625k.dts | 8 ++ arch/arm/boot/dts/bcm988312hr.dts | 10 ++- 44 files changed, 814 insertions(+), 167 deletions(-) create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts create mode 100644 arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts create mode 100644 arch/arm/boot/dts/bcm4709-linksys-ea9200.dts create mode 100644 arch/arm/boot/dts/bcm47094-linksys-panamera.dts create mode 100644 arch/arm/boot/dts/bcm953012hr.dts