[PATCH v2 1/5] dt-bindings: update device tree binding for Allwinner PRCM CCUs

[maxime.ripard@free-electrons.com (Maxime Ripard)]

On Thu, Mar 23, 2017 at 07:17:03AM +0800, Icenowy Zheng wrote:
> 
> 
> 23.03.2017, 04:09, "Maxime Ripard" <maxime.ripard@free-electrons.com>:
> > On Wed, Mar 22, 2017 at 02:22:22AM +0800, Icenowy Zheng wrote:
> >> ?21.03.2017, 15:41, "Maxime Ripard" <maxime.ripard@free-electrons.com>:
> >> ?> On Thu, Mar 16, 2017 at 01:28:04AM +0800, Icenowy Zheng wrote:
> >> ?>> ?Many Allwinner SoCs after A31 have a CCU in PRCM block.
> >> ?>>
> >> ?>> ?Give the ones on H3 and A64 compatible strings.
> >> ?>>
> >> ?>> ?Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> >> ?>> ?---
> >> ?>> ?Changes in v2:
> >> ?>> ?- Add iosc for R_CCU's on H3/A64. (A31, A23 and A33 seem to have different
> >> ?>> ???clock for mux 3 of ar100 clk. Investgations are needed for them.)
> >> ?>>
> >> ?>> ??Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 18 +++++++++++++++++-
> >> ?>> ??1 file changed, 17 insertions(+), 1 deletion(-)
> >> ?>>
> >> ?>> ?diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> >> ?>> ?index 68512aa398a9..4a4addff595d 100644
> >> ?>> ?--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> >> ?>> ?+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> >> ?>> ?@@ -7,9 +7,11 @@ Required properties :
> >> ?>> ??????????????????- "allwinner,sun8i-a23-ccu"
> >> ?>> ??????????????????- "allwinner,sun8i-a33-ccu"
> >> ?>> ??????????????????- "allwinner,sun8i-h3-ccu"
> >> ?>> ?+ - "allwinner,sun8i-h3-r-ccu"
> >> ?>> ??????????????????- "allwinner,sun8i-v3s-ccu"
> >> ?>> ??????????????????- "allwinner,sun9i-a80-ccu"
> >> ?>> ??????????????????- "allwinner,sun50i-a64-ccu"
> >> ?>> ?+ - "allwinner,sun50i-a64-r-ccu"
> >> ?>> ??????????????????- "allwinner,sun50i-h5-ccu"
> >> ?>>
> >> ?>> ??- reg: Must contain the registers base address and length
> >> ?>> ?@@ -20,7 +22,11 @@ Required properties :
> >> ?>> ??- #clock-cells : must contain 1
> >> ?>> ??- #reset-cells : must contain 1
> >> ?>>
> >> ?>> ?-Example:
> >> ?>> ?+For the PRCM CCUs on H3/A64, one more clock is needed:
> >> ?>> ?+- "iosc": another frequency oscillator used for CPUS (usually at 32000Hz,
> >> ?>> ?+ not the same with losc)
> >> ?>
> >> ?> This is called the internal oscillator in the datasheet, it would
> >> ?> probably make more sense to call it that way in the documentation too.
> >> ?>
> >> ?> This oscillator seems to be clocked at 16MHz, so we should represent
> >> ?> it as such.
> >> ?>
> >> ?> And I'm wondering, are you *sure* that it's fed directly from the
> >> ?> internal oscillator, or goes through the registers in the RTC, with
> >> ?> the 32 divider and 16 prescaler by default that makes it at roughly
> >> ?> the same rate (31.25kHz).
> >>
> >> ?In fact I know nothing about it -- I only represented the code in BSP
> >> ?clock driver.
> >>
> >> ?The mux value 3 varies from SoC to SoC. For A64/H5 it's 32000,
> >> ?for A33 it's 667000 (seems to be directly the internal OSC, as the
> >> ?user manual says the internal OSC is 600~700kHz; but it's named
> >> ?cpuosc rather than iosc in A33 BSP clock driver); for A80 it's even
> >> ?PLL_AUDIO.
> >
> > Where are you getting those info from?
> >
> > As far as I know, the A33 PRCM takes the hosc, losc, pll6 and CPU
> > (internal) oscillator:
> > https://github.com/allwinner-zh/linux-3.4-sunxi/blob/master/drivers/clk/sunxi/clk-sun8iw5.c#L508
> >
> > The H3 takes the hosc and losc:
> > https://github.com/allwinner-zh/linux-3.4-sunxi/blob/master/drivers/clk/sunxi/clk-sun8iw7.c#L379
> >
> > The A80 takes the hosc and losc:
> > https://github.com/allwinner-zh/linux-3.4-sunxi/blob/master/drivers/clk/sunxi/clk-sun9iw1.c#L281
> >
> > The A64 takes the hosc, losc, pll-periph0 and the iosc, which indeed
> > seems to be fed from the internal oscillator with the divider in the
> > RTC:
> > https://github.com/longsleep/linux-pine64/blob/lichee-dev-v3.10.65-bsp2.0/arch/arm64/boot/dts/sun50iw1p1-clk.dtsi#L19
> > https://github.com/longsleep/linux-pine64/blob/lichee-dev-v3.10.65-bsp2.0/drivers/clk/sunxi/clk-sun50iw1.c#L603
> 
> But then in sunxi_init_clocks function, the iosc clock is initialized
> as a fixed clock with 32000Hz.
> 
> The clock node in BSP device tree have a compatible of
> allwinner,fixed-clock, but not fixed-clock, which makes it not able
> to be really probed.

That clock is registered:
https://github.com/longsleep/linux-pine64/blob/lichee-dev-v3.10.65-bsp2.0/drivers/clk/sunxi/clk-sun50iw1.c#L1193

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170326/c6f2e97f/attachment-0001.sig>