From: ralph.sennhauser@gmail.com (Ralph Sennhauser)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/4] mvebu: xp: Add PWM properties to .dtsi files
Date: Mon, 27 Mar 2017 21:42:58 +0200 [thread overview]
Message-ID: <20170327194301.1104-3-ralph.sennhauser@gmail.com> (raw)
In-Reply-To: <20170327194301.1104-1-ralph.sennhauser@gmail.com>
From: Andrew Lunn <andrew@lunn.ch>
Add properties to the GPIO nodes to allow them to be also used as PWM
lines.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
URL: https://patchwork.ozlabs.org/patch/427294/
[Ralph Sennhauser:
* Use new compatible string marvell,armada-370-xp-gpio
* Add missing reg-names / #pwm-cell properties to armada-xp-mv78260.dtsi
'gpio1' node]
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
---
arch/arm/boot/dts/armada-370.dtsi | 16 +++++++++++-----
arch/arm/boot/dts/armada-xp-mv78230.dtsi | 14 ++++++++++----
arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 +++++++++++-----
arch/arm/boot/dts/armada-xp-mv78460.dtsi | 16 +++++++++++-----
4 files changed, 43 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index cc011c8..e30b076 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -137,29 +137,35 @@
};
gpio0: gpio at 18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-xp-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio at 18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-xp-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio at 18180 {
- compatible = "marvell,orion-gpio";
+ compatible = "marvell,armada-370-xp-gpio";
reg = <0x18180 0x40>;
ngpios = <2>;
gpio-controller;
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 07c5090..429ac10 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -202,25 +202,31 @@
internal-regs {
gpio0: gpio at 18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-xp-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio at 18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-xp-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <17>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>;
+ clocks = <&coreclk 0>;
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 64e936a..333c470 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -285,29 +285,35 @@
internal-regs {
gpio0: gpio at 18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-xp-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio at 18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-xp-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio at 18180 {
- compatible = "marvell,orion-gpio";
+ compatible = "marvell,armada-370-xp-gpio";
reg = <0x18180 0x40>;
ngpios = <3>;
gpio-controller;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index d1383dd..2ff825d 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -323,29 +323,35 @@
internal-regs {
gpio0: gpio at 18100 {
- compatible = "marvell,orion-gpio";
- reg = <0x18100 0x40>;
+ compatible = "marvell,armada-370-xp-gpio";
+ reg = <0x18100 0x40>, <0x181c0 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <82>, <83>, <84>, <85>;
+ clocks = <&coreclk 0>;
};
gpio1: gpio at 18140 {
- compatible = "marvell,orion-gpio";
- reg = <0x18140 0x40>;
+ compatible = "marvell,armada-370-xp-gpio";
+ reg = <0x18140 0x40>, <0x181c8 0x08>;
+ reg-names = "gpio", "pwm";
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
+ #pwm-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <87>, <88>, <89>, <90>;
+ clocks = <&coreclk 0>;
};
gpio2: gpio at 18180 {
- compatible = "marvell,orion-gpio";
+ compatible = "marvell,armada-370-xp-gpio";
reg = <0x18180 0x40>;
ngpios = <3>;
gpio-controller;
--
2.10.2
next prev parent reply other threads:[~2017-03-27 19:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-27 19:42 [PATCH v4 0/4] gpio: mvebu: Add PWM fan support Ralph Sennhauser
2017-03-27 19:42 ` [PATCH v4 1/4] gpio: mvebu: Add limited PWM support Ralph Sennhauser
2017-03-27 19:42 ` Ralph Sennhauser [this message]
2017-03-30 15:45 ` [PATCH v4 2/4] mvebu: xp: Add PWM properties to .dtsi files Gregory CLEMENT
2017-03-30 16:14 ` Ralph Sennhauser
2017-03-27 19:42 ` [PATCH v4 3/4] ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig Ralph Sennhauser
2017-03-27 19:43 ` [PATCH v4 4/4] mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan Ralph Sennhauser
2017-03-30 16:01 ` Gregory CLEMENT
2017-03-28 13:57 ` [PATCH v4 0/4] gpio: mvebu: Add PWM fan support Andrew Lunn
2017-03-30 16:03 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170327194301.1104-3-ralph.sennhauser@gmail.com \
--to=ralph.sennhauser@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox