From: opendmb@gmail.com (Doug Berger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/8] bus: brcmstb_gisb: Add ARM64 support
Date: Tue, 28 Mar 2017 14:34:29 -0700 [thread overview]
Message-ID: <20170328213431.10904-7-opendmb@gmail.com> (raw)
In-Reply-To: <20170328213431.10904-1-opendmb@gmail.com>
From: Florian Fainelli <f.fainelli@gmail.com>
Hook to the ARM64 data abort exception #16: synchronous external
abort, which is how the GISB errors will be funneled back to the
ARM64 CPU in case of problems
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/bus/Kconfig | 2 +-
drivers/bus/brcmstb_gisb.c | 15 ++++++++++++---
2 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 0a52da439abf..d2a5f1184022 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -57,7 +57,7 @@ config ARM_CCN
config BRCMSTB_GISB_ARB
bool "Broadcom STB GISB bus arbiter"
- depends on ARM || MIPS
+ depends on ARM || ARM64 || MIPS
default ARCH_BRCMSTB || BMIPS_GENERIC
help
Driver for the Broadcom Set Top Box System-on-a-chip internal bus
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index edf79432f899..500b6bb5c739 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,6 +30,11 @@
#include <asm/signal.h>
#endif
+#ifdef CONFIG_ARM64
+#include <asm/signal.h>
+#include <asm/system_misc.h>
+#endif
+
#ifdef CONFIG_MIPS
#include <asm/traps.h>
#endif
@@ -225,7 +230,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
return 0;
}
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
@@ -235,7 +240,7 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
brcmstb_gisb_arb_decode_addr(gdev, "bus error");
-#if !defined(CONFIG_ARM_LPAE)
+#if defined(CONFIG_ARM) && !defined(CONFIG_ARM_LPAE)
/*
* If it was an imprecise abort, then we need to correct the
* return address to be _after_ the instruction.
@@ -247,7 +252,7 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
/* Always report unhandled exception */
return 1;
}
-#endif
+#endif /* CONFIG_ARM || CONFIG_ARM64 */
#ifdef CONFIG_MIPS
static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
@@ -395,6 +400,10 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
"imprecise external abort");
#endif
#endif /* CONFIG_ARM */
+#ifdef CONFIG_ARM64
+ hook_fault_code(16, brcmstb_bus_error_handler, SIGBUS, 0,
+ "synchronous external abort");
+#endif
#ifdef CONFIG_MIPS
board_be_handler = brcmstb_bus_error_handler;
#endif
--
2.12.0
next prev parent reply other threads:[~2017-03-28 21:34 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-28 21:34 [PATCH v2 0/8] bus: brcmstb_gisb: add support for GISBv7 arbiter Doug Berger
2017-03-28 21:34 ` [PATCH v2 1/8] arm64: mm: Allow installation of memory abort handlers Doug Berger
2017-03-29 11:32 ` Mark Rutland
2017-03-28 21:34 ` [PATCH v2 2/8] arm64: mm: mark fault_info __ro_after_init Doug Berger
2017-03-29 11:23 ` Mark Rutland
2017-03-28 21:34 ` [PATCH v2 3/8] bus: brcmstb_gisb: Use register offsets with writes too Doug Berger
2017-03-28 21:34 ` [PATCH v2 4/8] bus: brcmstb_gisb: Correct hooking of ARM aborts Doug Berger
2017-03-28 21:34 ` [PATCH v2 5/8] bus: brcmstb_gisb: correct support for 64-bit address output Doug Berger
2017-03-28 21:34 ` Doug Berger [this message]
2017-03-29 11:20 ` [PATCH v2 6/8] bus: brcmstb_gisb: Add ARM64 support Mark Rutland
2017-03-28 21:34 ` [PATCH v2 7/8] bus: brcmstb_gisb: add notifier handling Doug Berger
2017-03-29 10:13 ` Mark Rutland
2017-03-29 17:39 ` Doug Berger
2017-03-29 18:17 ` Mark Rutland
2017-03-28 21:34 ` [PATCH v2 8/8] bus: brcmstb_gisb: update to support new revision Doug Berger
2017-03-29 11:25 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170328213431.10904-7-opendmb@gmail.com \
--to=opendmb@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).