linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/15] ARM: dts: imx6dl-icore-rqs: Add sgtl5000 codec node
Date: Wed, 29 Mar 2017 11:29:12 +0800	[thread overview]
Message-ID: <20170329032910.GX30608@dragon> (raw)
In-Reply-To: <1490372330-5611-11-git-send-email-jagan@openedev.com>

On Fri, Mar 24, 2017 at 09:48:45PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
> 
> - Moved sound card node on imx6qdl-icore-rqs.dtsi
> - Added codec node in imx6dl-icore-rqs from imx6q-icore-rqs
> 
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Matteo Lisi <matteo.lisi@engicam.com>
> Cc: Michael Trimarchi <michael@amarulasolutions.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v2:
> - Newly added patch
> 
>  arch/arm/boot/dts/imx6dl-icore-rqs.dts   | 11 +++++++++++
>  arch/arm/boot/dts/imx6q-icore-rqs.dts    | 13 -------------
>  arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 13 +++++++++++++
>  3 files changed, 24 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
> index cf42c2f..5b4c14c 100644
> --- a/arch/arm/boot/dts/imx6dl-icore-rqs.dts
> +++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
> @@ -49,3 +49,14 @@
>  	model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
>  	compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
>  };
> +
> +&i2c3 {
> +	codec: sgtl5000 at 0a {

Why adding something that the following patch will change right away?

Shawn

> +		compatible = "fsl,sgtl5000";
> +		reg = <0x0a>;
> +		clocks = <&clks IMX6QDL_CLK_CKO>;
> +		VDDA-supply = <&reg_2p5v>;
> +		VDDIO-supply = <&reg_3p3v>;
> +		VDDD-supply = <&reg_1p8v>;
> +	};
> +};
> diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
> index e451b4c..441a28e5 100644
> --- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
> +++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
> @@ -47,19 +47,6 @@
>  / {
>  	model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
>  	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
> -
> -	sound {
> -		compatible = "fsl,imx-audio-sgtl5000";
> -		model = "imx-audio-sgtl5000";
> -		ssi-controller = <&ssi1>;
> -		audio-codec = <&codec>;
> -		audio-routing =
> -			"MIC_IN", "Mic Jack",
> -			"Mic Jack", "Mic Bias",
> -			"Headphone Jack", "HP_OUT";
> -		mux-int-port = <1>;
> -		mux-ext-port = <4>;
> -	};
>  };
>  
>  &i2c3 {
> diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
> index 5fab5be..4032d38 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
> @@ -118,6 +118,19 @@
>  		clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
>  		clock-names = "refclk";
>  	};
> +
> +	sound {
> +		compatible = "fsl,imx-audio-sgtl5000";
> +		model = "imx-audio-sgtl5000";
> +		ssi-controller = <&ssi1>;
> +		audio-codec = <&codec>;
> +		audio-routing =
> +			"MIC_IN", "Mic Jack",
> +			"Mic Jack", "Mic Bias",
> +			"Headphone Jack", "HP_OUT";
> +		mux-int-port = <1>;
> +		mux-ext-port = <4>;
> +	};
>  };
>  
>  &clks {
> -- 
> 1.9.1
> 

  reply	other threads:[~2017-03-29  3:29 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-24 16:18 [PATCH v2 00/15] ARM: dts: i.MX6: Add lcdif/sound nodes on Engicam SOMs Jagan Teki
2017-03-24 16:18 ` [PATCH v2 01/15] ARM: dts: imx6ul-geam: Add backlight support for lcdif Jagan Teki
2017-03-24 16:18 ` [PATCH v2 02/15] ARM: dts: imx6ul-isiot: " Jagan Teki
2017-03-24 16:18 ` [PATCH v2 03/15] ARM: dts: imx6ul-isiot: Add imx6ul-isiot-common.dtsi Jagan Teki
2017-03-24 16:18 ` [PATCH v2 04/15] ARM: dts: imx6ul-isiot: Add i2c nodes Jagan Teki
2017-03-24 16:18 ` [PATCH v2 05/15] ARM: dts: imx6ul-isiot-common: Add touchscreen node Jagan Teki
2017-03-24 16:18 ` [PATCH v2 06/15] ARM: dts: imx6ul-[geam|isiot]: Add sai2 node Jagan Teki
2017-03-24 16:18 ` [PATCH v2 07/15] ARM: dts: imx6ul-isiot: Add Sound card with codec node Jagan Teki
2017-03-29  3:27   ` Shawn Guo
2017-03-24 16:18 ` [PATCH v2 08/15] ARM: dts: imx6ul-geam: " Jagan Teki
2017-03-24 16:18 ` [PATCH v2 09/15] ARM: dts: imx6qdl-icore: " Jagan Teki
2017-03-24 16:18 ` [PATCH v2 10/15] ARM: dts: imx6dl-icore-rqs: Add sgtl5000 " Jagan Teki
2017-03-29  3:29   ` Shawn Guo [this message]
2017-03-24 16:18 ` [PATCH v2 11/15] ARM: dts: imx6qdl-icore-rqs: Replace codec 'lable: node@addr' Jagan Teki
2017-03-24 16:18 ` [PATCH v2 12/15] ARM: dts: imx6dl-icore: Add LVDS support Jagan Teki
2017-03-24 16:18 ` [PATCH v2 13/15] ARM: dts: imx6dl-icore: Add touchscreen node Jagan Teki
2017-03-24 16:18 ` [PATCH v2 14/15] ARM: dts: imx6qdl-icore-rqs: Add CAN nodes Jagan Teki
2017-03-24 16:18 ` [PATCH v2 15/15] ARM: dts: imx6ul-isiot: Add FEC node support Jagan Teki
2017-03-29  3:40 ` [PATCH v2 00/15] ARM: dts: i.MX6: Add lcdif/sound nodes on Engicam SOMs Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170329032910.GX30608@dragon \
    --to=shawnguo@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).