From mboxrd@z Thu Jan 1 00:00:00 1970 From: mark.rutland@arm.com (Mark Rutland) Date: Thu, 30 Mar 2017 19:19:32 +0100 Subject: [PATCH v3 0/6] bus: brcmstb_gisb: add support for GISBv7 arbiter In-Reply-To: References: <20170330002914.7371-1-opendmb@gmail.com> Message-ID: <20170330181932.GB8062@leverpostej> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Mar 30, 2017 at 09:33:32AM -0700, Florian Fainelli wrote: > On 03/29/2017 05:29 PM, Doug Berger wrote: > > This patch set contains changes to enable the GISB arbiter driver > > on the latest ARM64 architecture Set-Top Box chips from Broadcom. > > > > Since the ARM64 architecture does not support the hooking of low > > level fault handlers the driver has been adjusted to depend solely > > on GISB interrupts and notify events to provide diagnostic > > messaging. The GISB hardware still triggers bus faults for the > > processor so the default low-level aborts will occur and will be > > handled based on the architecture specific kernel implementation. > > > > While this tends to obsure the GISB error messaging it is still > > reasonable so the same approach is applied to the ARM architecture > > for consistency. > > > > The patches also correct some issues with the existing driver > > and add the new register map for the GISBv7 hardware first > > appearing in the BCM7278 device. > > This all looks great to me, and since there are no more ARM64 > dependencies I can take this via the Broadcom ARM/ARM64 SoC pull requests. > > Mark, are you also happy with this v3? It looks fine by me. Thanks, Mark.