From mboxrd@z Thu Jan 1 00:00:00 1970 From: antoine.tenart@free-electrons.com (Antoine Tenart) Date: Mon, 3 Apr 2017 09:07:58 +0200 Subject: [PATCH 1/3] ARM: dts: alpine: remove 0x's from the uart1 node unit address In-Reply-To: <20170329093827.18881-1-antoine.tenart@free-electrons.com> References: <20170329093827.18881-1-antoine.tenart@free-electrons.com> Message-ID: <20170403070758.aexdiv5pyawu7tzr@kwain> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Mar 29, 2017 at 11:38:25AM +0200, Antoine Tenart wrote: > Remove 0x's from the uart1 node unit address to have consistent nodes. > > Signed-off-by: Antoine Tenart Applied on alpine/dt. Thanks! > --- > arch/arm/boot/dts/alpine.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi > index f09f9c8e178a..341a500c8d8a 100644 > --- a/arch/arm/boot/dts/alpine.dtsi > +++ b/arch/arm/boot/dts/alpine.dtsi > @@ -129,7 +129,7 @@ > reg-io-width = <4>; > }; > > - uart1:uart at 0xfd884000 { > + uart1:uart at fd884000 { > compatible = "ns16550a"; > reg = <0x0 0xfd884000 0x0 0x1000>; > clock-frequency = <0>; /* Filled by loader */ > -- > 2.11.0 > -- Antoine T?nart, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: