[RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3

[robh@kernel.org (Rob Herring)]

On Sun, Apr 02, 2017 at 09:33:01PM +0800, Icenowy Zheng wrote:
> Allwinner H3 features a thermal sensor like the one in A33, but has its
> register re-arranged, the clock divider moved to CCU (originally the
> clock divider is in ADC) and added a pair of bus clock and reset.
> 
> Update the binding document to cover H3.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
>  .../devicetree/bindings/mfd/sun4i-gpadc.txt        | 23 ++++++++++++++++++++--
>  1 file changed, 21 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> index badff3611a98..7753133ca0ff 100644
> --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> @@ -4,12 +4,20 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
>  and sometimes as a touchscreen controller.
>  
>  Required properties:
> -  - compatible: "allwinner,sun8i-a33-ths",
> +  - compatible: must contain one of the following compatibles:
> +		- "allwinner,sun8i-a33-ths"
> +		- "allwinner,sun8i-h3-ths"
>    - reg: mmio address range of the chip,
>    - #thermal-sensor-cells: shall be 0,
>    - #io-channel-cells: shall be 0,
>  
> -Example:
> +Required properties for the following compatibles:
> +		- "allwinner,sun8i-h3-ths"
> +  - clocks: the bus clock and the input clock of the ADC,
> +  - clock-names: should be "bus" and "ths",
> +  - resets: the bus reset of the ADC,
> +
> +Example for A33:
>  	ths: ths at 01c25000 {
>  		compatible = "allwinner,sun8i-a33-ths";
>  		reg = <0x01c25000 0x100>;
> @@ -17,6 +25,17 @@ Example:
>  		#io-channel-cells = <0>;
>  	};
>  
> +Example for H3:
> +	ths: ths at 01c25000 {

adc at ...

And drop the leading 0.

> +		compatible = "allwinner,sun8i-h3-ths";
> +		reg = <0x01c25000 0x100>;
> +		clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
> +		clock-names = "bus", "ths";
> +		resets = <&ccu RST_BUS_THS>;
> +		#thermal-sensor-cells = <0>;
> +		#io-channel-cells = <0>;
> +	};
> +
>  sun4i, sun5i and sun6i SoCs are also supported via the older binding:
>  
>  sun4i resistive touchscreen controller
> -- 
> 2.12.2
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel