From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Wed, 5 Apr 2017 08:22:14 +0200 Subject: [PATCH v4 0/6] ARM: dts: sunxi: Add CAN node and can0_pins_a pinctrl settings In-Reply-To: <1491330992-9876-1-git-send-email-menschel.p@posteo.de> References: <1491330992-9876-1-git-send-email-menschel.p@posteo.de> Message-ID: <20170405062214.ejc4irrypxjoqufu@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Apr 04, 2017 at 08:36:26PM +0200, Patrick Menschel wrote: > The Allwinner A10/A20 SoCs have an on-board CAN (Controller Area Network) > controller. This patch adds the CAN core to the SoC's include files, > sun4i-a10.dtsi and sun7i-a20.dtsi. > > On linux-can mailing list was a discussion about updating the device tree bindings > https://lkml.org/lkml/2015/9/17/220 > but it did not progress past writing the documentation file. > Documentation/devicetree/bindings/net/can/sun4i_can.txt > > The CAN controller can be enabled in a board specific dts file as > described in the documentation file or by using a device tree overlay. Applied 1 and 4. The others were already merged. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 801 bytes Desc: not available URL: