* [PATCH v2 1/2] clk: stm32f4: fix: exclude values 0 and 1 for PLLQ
2017-03-16 8:16 [PATCH v2 0/2] STM32F4 clock fixes gabriel.fernandez at st.com
@ 2017-03-16 8:16 ` gabriel.fernandez at st.com
2017-04-05 21:52 ` Stephen Boyd
2017-03-16 8:16 ` [PATCH v2 2/2] clk: stm32f4: fix timeout management for pll and ready gate gabriel.fernandez at st.com
1 sibling, 1 reply; 5+ messages in thread
From: gabriel.fernandez at st.com @ 2017-03-16 8:16 UTC (permalink / raw)
To: linux-arm-kernel
From: Gabriel Fernandez <gabriel.fernandez@st.com>
0000: PLLQ = 0, wrong configuration
0001: PLLQ = 1, wrong configuration
...
0010: PLLQ = 2
0011: PLLQ = 3
0100: PLLQ = 4
...
1111: PLLQ = 1
Use divider table to exclude 0 and 1 values.
Fixes: 83135ad3c517 ("clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469 boards")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
drivers/clk/clk-stm32f4.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index ab609a7..cf9449b3 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -429,6 +429,13 @@ enum {
{ 0, 2 }, { 1, 4 }, { 2, 6 }, { 3, 8 }, { 0 }
};
+static const struct clk_div_table pll_divq_table[] = {
+ { 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 },
+ { 8, 8 }, { 9, 9 }, { 10, 10 }, { 11, 11 }, { 12, 12 }, { 13, 13 },
+ { 14, 14 }, { 15, 15 },
+ { 0 }
+};
+
static const struct clk_div_table pll_divr_table[] = {
{ 2, 2 }, { 3, 3 }, { 4, 4 }, { 5, 5 }, { 6, 6 }, { 7, 7 }, { 0 }
};
@@ -496,9 +503,9 @@ struct stm32f4_div_data {
#define MAX_PLL_DIV 3
static const struct stm32f4_div_data div_data[MAX_PLL_DIV] = {
- { 16, 2, 0, pll_divp_table },
- { 24, 4, CLK_DIVIDER_ONE_BASED, NULL },
- { 28, 3, 0, pll_divr_table },
+ { 16, 2, 0, pll_divp_table },
+ { 24, 4, 0, pll_divq_table },
+ { 28, 3, 0, pll_divr_table },
};
struct stm32f4_pll_data {
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v2 2/2] clk: stm32f4: fix timeout management for pll and ready gate
2017-03-16 8:16 [PATCH v2 0/2] STM32F4 clock fixes gabriel.fernandez at st.com
2017-03-16 8:16 ` [PATCH v2 1/2] clk: stm32f4: fix: exclude values 0 and 1 for PLLQ gabriel.fernandez at st.com
@ 2017-03-16 8:16 ` gabriel.fernandez at st.com
2017-04-05 21:52 ` Stephen Boyd
1 sibling, 1 reply; 5+ messages in thread
From: gabriel.fernandez at st.com @ 2017-03-16 8:16 UTC (permalink / raw)
To: linux-arm-kernel
From: Gabriel Fernandez <gabriel.fernandez@st.com>
Use a classic polling to test bit ready.
And the shift of the bit ready of LSE & LSI were wrongs.
Fixes: 861adc44d290 ("clk: stm32f4: Add LSI & LSE clocks")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
drivers/clk/clk-stm32f4.c | 43 +++++++++++++++++++++++++++++--------------
1 file changed, 29 insertions(+), 14 deletions(-)
diff --git a/drivers/clk/clk-stm32f4.c b/drivers/clk/clk-stm32f4.c
index cf9449b3..68e2a4e 100644
--- a/drivers/clk/clk-stm32f4.c
+++ b/drivers/clk/clk-stm32f4.c
@@ -531,19 +531,26 @@ static int stm32f4_pll_is_enabled(struct clk_hw *hw)
return clk_gate_ops.is_enabled(hw);
}
+#define PLL_TIMEOUT 10000
+
static int stm32f4_pll_enable(struct clk_hw *hw)
{
struct clk_gate *gate = to_clk_gate(hw);
struct stm32f4_pll *pll = to_stm32f4_pll(gate);
- int ret = 0;
- unsigned long reg;
+ int bit_status;
+ unsigned int timeout = PLL_TIMEOUT;
- ret = clk_gate_ops.enable(hw);
+ if (clk_gate_ops.is_enabled(hw))
+ return 0;
+
+ clk_gate_ops.enable(hw);
- ret = readl_relaxed_poll_timeout_atomic(base + STM32F4_RCC_CR, reg,
- reg & (1 << pll->bit_rdy_idx), 0, 10000);
+ do {
+ bit_status = !(readl(gate->reg) & BIT(pll->bit_rdy_idx));
- return ret;
+ } while (bit_status && --timeout);
+
+ return bit_status;
}
static void stm32f4_pll_disable(struct clk_hw *hw)
@@ -834,24 +841,32 @@ struct stm32_rgate {
u8 bit_rdy_idx;
};
-#define RTC_TIMEOUT 1000000
+#define RGATE_TIMEOUT 50000
static int rgclk_enable(struct clk_hw *hw)
{
struct clk_gate *gate = to_clk_gate(hw);
struct stm32_rgate *rgate = to_rgclk(gate);
- u32 reg;
- int ret;
+ int bit_status;
+ unsigned int timeout = RGATE_TIMEOUT;
+
+ if (clk_gate_ops.is_enabled(hw))
+ return 0;
disable_power_domain_write_protection();
clk_gate_ops.enable(hw);
- ret = readl_relaxed_poll_timeout_atomic(gate->reg, reg,
- reg & rgate->bit_rdy_idx, 1000, RTC_TIMEOUT);
+ do {
+ bit_status = !(readl(gate->reg) & BIT(rgate->bit_rdy_idx));
+ if (bit_status)
+ udelay(100);
+
+ } while (bit_status && --timeout);
enable_power_domain_write_protection();
- return ret;
+
+ return bit_status;
}
static void rgclk_disable(struct clk_hw *hw)
@@ -1533,7 +1548,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
}
clks[CLK_LSI] = clk_register_rgate(NULL, "lsi", "clk-lsi", 0,
- base + STM32F4_RCC_CSR, 0, 2, 0, &stm32f4_clk_lock);
+ base + STM32F4_RCC_CSR, 0, 1, 0, &stm32f4_clk_lock);
if (IS_ERR(clks[CLK_LSI])) {
pr_err("Unable to register lsi clock\n");
@@ -1541,7 +1556,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
}
clks[CLK_LSE] = clk_register_rgate(NULL, "lse", "clk-lse", 0,
- base + STM32F4_RCC_BDCR, 0, 2, 0, &stm32f4_clk_lock);
+ base + STM32F4_RCC_BDCR, 0, 1, 0, &stm32f4_clk_lock);
if (IS_ERR(clks[CLK_LSE])) {
pr_err("Unable to register lse clock\n");
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread