[PATCH] ARM: omap2plus_defconfig: Enable droid 4 devices

[PATCH] ARM: omap2plus_defconfig: Enable droid 4 devices

[Tony Lindgren]

We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to
be able to mount root on the eMMC. And then POWER_RESET_GPIO
is good to have built-in. The rest of the devices can be loadable
modules.

This gets various devices such as regulators, touchscreen, power
button, charger, HDMI audio, LEDs, RTC, ADC, and USB working.

Note that omapdrm needs to be configured manually as we're still
using omapfb by default.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/configs/omap2plus_defconfig | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -213,6 +213,7 @@ CONFIG_KEYBOARD_TWL4030=m
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
 CONFIG_TOUCHSCREEN_EDT_FT5X06=m
 CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
 CONFIG_TOUCHSCREEN_PIXCIR=m
@@ -220,6 +221,7 @@ CONFIG_TOUCHSCREEN_TSC2004=m
 CONFIG_TOUCHSCREEN_TSC2005=m
 CONFIG_TOUCHSCREEN_TSC2007=m
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_CPCAP_PWRBUTTON=m
 CONFIG_INPUT_TPS65218_PWRBUTTON=m
 CONFIG_INPUT_TWL4030_PWRBUTTON=m
 CONFIG_INPUT_PALMAS_PWRBUTTON=m
@@ -256,7 +258,9 @@ CONFIG_W1=m
 CONFIG_HDQ_MASTER_OMAP=m
 CONFIG_POWER_AVS=y
 CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
 CONFIG_BATTERY_BQ27XXX=m
+CONFIG_CHARGER_CPCAP=m
 CONFIG_CHARGER_ISP1704=m
 CONFIG_CHARGER_TWL4030=m
 CONFIG_CHARGER_BQ2415X=m
@@ -278,6 +282,7 @@ CONFIG_DRA752_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=m
 CONFIG_TWL4030_WATCHDOG=m
+CONFIG_MFD_CPCAP=y
 CONFIG_MFD_TI_AM335X_TSCADC=m
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
@@ -285,7 +290,9 @@ CONFIG_MFD_TI_LP873X=y
 CONFIG_MFD_TPS65218=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
+CONFIG_REGULATOR_CPCAP=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_LM363X=m
 CONFIG_REGULATOR_LP872X=y
 CONFIG_REGULATOR_LP873X=y
 CONFIG_REGULATOR_PALMAS=y
@@ -354,6 +361,7 @@ CONFIG_SND_SOC=m
 CONFIG_SND_EDMA_SOC=m
 CONFIG_SND_AM33XX_SOC_EVM=m
 CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
 CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
 CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
@@ -418,6 +426,7 @@ CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CPCAP=m
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_PWM=m
@@ -436,6 +445,7 @@ CONFIG_RTC_DRV_TWL92330=y
 CONFIG_RTC_DRV_TWL4030=m
 CONFIG_RTC_DRV_PALMAS=m
 CONFIG_RTC_DRV_OMAP=m
+CONFIG_RTC_DRV_CPCAP=m
 CONFIG_DMADEVICES=y
 CONFIG_DMA_OMAP=y
 CONFIG_TI_EDMA=y
@@ -448,6 +458,7 @@ CONFIG_IIO=m
 CONFIG_IIO_SW_DEVICE=m
 CONFIG_IIO_SW_TRIGGER=m
 CONFIG_IIO_ST_ACCEL_3AXIS=m
+CONFIG_CPCAP_ADC=m
 CONFIG_TI_AM335X_ADC=m
 CONFIG_BMP280=m
 CONFIG_PWM=y
@@ -456,6 +467,7 @@ CONFIG_PWM_TIECAP=m
 CONFIG_PWM_TIEHRPWM=m
 CONFIG_PWM_TWL=m
 CONFIG_PWM_TWL_LED=m
+CONFIG_PHY_CPCAP_USB=m
 CONFIG_PHY_DM816X_USB=m
 CONFIG_OMAP_USB2=m
 CONFIG_TI_PIPE3=y
-- 
2.12.2

[PATCH] ARM: omap2plus_defconfig: Enable droid 4 devices

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [170409 16:31]:
> --- a/arch/arm/configs/omap2plus_defconfig
> +++ b/arch/arm/configs/omap2plus_defconfig
...
> +CONFIG_CHARGER_CPCAP=m
...
> +CONFIG_PHY_CPCAP_USB=m

I'm dropping these two changes from this patch as they are not
in Linux next.

Regards,

Tony