From mboxrd@z Thu Jan 1 00:00:00 1970 From: clabbe.montjoie@gmail.com (Corentin Labbe) Date: Wed, 12 Apr 2017 13:13:53 +0200 Subject: [PATCH v4 11/18] arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high In-Reply-To: <20170412111400.2296-1-clabbe.montjoie@gmail.com> References: <20170412111400.2296-1-clabbe.montjoie@gmail.com> Message-ID: <20170412111400.2296-12-clabbe.montjoie@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On the Orange Pi PC Plus, the polarity of the LEDs on the RJ45 Ethernet port were changed from active low to active high. Signed-off-by: Chen-Yu Tsai Signed-off-by: Corentin Labbe --- arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts index 8b93f5c..0380769 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts @@ -86,3 +86,8 @@ /* eMMC is missing pull-ups */ bias-pull-up; }; + +&emac { + /* LEDs changed to active high on the plus */ + /delete-property/ allwinner,leds-active-low; +}; -- 2.10.2